1#ifndef CubeDataThreadTester_h
2#define CubeDataThreadTester_h
12template<
typename T>
class QList;
69 int endSample,
int endLine,
int band,
void *caller);
84 int endSample,
int endLine,
int band,
void *caller);
Buffer for containing a three dimensional section of an image.
Encapsulation of Cube I/O with Change Notifications.
bool p_notifyDone
True if we will notify done on the next brick received for R/W.
void Connect()
This connects this class' signals and slots with CubeDataThread's signals and slots.
void RequestReadWriteCube(int cubeId, int startSample, int startLine, int endSample, int endLine, int band, void *caller)
Ask for a brick for reading and writing.
void ReadCubeTest(int)
This tests a basic read.
void ReadBrick(void *requester, int cubeId, const Isis::Brick *data)
This is called when a brick is read.
void WriteCubeTest(int)
This tests a basic write.
int p_numTestsDone
The count of completed tests.
void WriteCubeTest2(int, int)
This tests two non-conflicting writes.
CubeDataThread * p_cubeDataThread
The data thread being tested.
CubeDataThread * DataThread()
Returns the cube data thread being tested.
bool p_execStarted
True if this thread is started.
void ReadCubeTest3(int)
This tests an overlapping read.
void NotifyChangeTest(int)
This test tests this automatic change notifications.
virtual ~CubeDataThreadTester()
This cleans up the cube data thread.
void run()
This thread is centered completely around its event loop.
CubeDataThreadTester(CubeDataThread *)
This initializes a CubeDataThreadTester.
void ReadCubeTest2(int, int)
This tests two basic reads with no conflicts.
void WriteCubeTest3(int)
This tests two conflicting* writes.
void WriteCubeTest3BreakDeadlock()
This test breaks the deadlock caused by the third write test.
int NumberOfTestsDone()
Returns the number of tests done (testing methods count as several)
QVector< QPair< int, const Isis::Brick * > > * p_cachedDoneBricks
A list of bricks we haven't send the done signal for.
void RequestReadCube(int cubeId, int startSample, int startLine, int endSample, int endLine, int band, void *caller)
Ask for a brick for reading.
void ReadWriteBrick(void *requester, int cubeId, Isis::Brick *data)
This is called when a brick is given for R/W.
void NotifyDoneWithData(int, const Isis::Brick *)
Let the cube data thread know we're no longer working with a particular brick.
void BrickChanged(int cubeId, const Isis::Brick *data)
This is called when a brick is written.
This is free and unencumbered software released into the public domain.
This is free and unencumbered software released into the public domain.