This program will import a PDS Cassini ISS image file into an
Isis cube. Some Cassini files available from PDS contain VICAR labels
THIS PROGRAM ONLY ACCEPTS PDS LABELS. You must specify an
input file which contains PDS labels. Note: Scientists
indicate that zeros may be valid DN values for sky areas of CISS images,
but missing pixels are also assigned a value of zero and there is no known
way to distinguish them. Since the chance of a valid zero DN is so slight,
ciss2isis will replace all zeros with Isis::Null.
Cassini ISS Software
Interface Specification (SIS) --
https://cel.jpl.nasa.gov/cedr/home/mcdl.html
History
Jeff Anderson
2004-02-06
Original version
Steven Koechle
2007-05-24
Removed Vicar Support.
Added PDS Cassini ISS support.
Steven Koechle
2007-06-12
Added Example
Fixed certain label groups being written to Root
Steven Koechle
2007-06-28
Removed unused variables, added StopTime to translation table
Christopher Austin
2008-03-18
Checks if input file is rdr.
Jeannie Walldren
2008-08-25
Modified application to
save off binary file header and compute read out order, to save off line
prefix data of overclocked pixels with the appropriate overclock average
into a table, and to convert compressed 8bit images to 16bit using a
look-up table. Added keywords, with units where appropriate, to labels.
Jeannie Walldren
2008-08-28
Modified to
allow import of images with BandBin filter combinations not found or
commented out in the translation *.def files. Previously, this
circumstance stopped the program and threw an exception. Application now
outputs a warning to the log but still creates the cube.
Jeannie Walldren
2008-11-05
Modified FixDns method and updated documentation.
Jeannie Walldren
2009-05-27
Modified to convert BiasStripMean value back to 12-bit using look up table
for images with DataConversionType of Table. Updated documentation in
ciss2isis.cpp
Christopher Austin
2010-01-08
Fixed the reading of Pvl labels twice.
Sharmila Prasad
2010-12-08
Removed traling 'Z' for Start, Stop and Image Time Pds labels
Tracie Sucharski
2012-05-04
Added error message when input image does not contain Pds labels.
Christopher Combs
2018-01-30
Changed documentation to reflect newly added and unsupported target names
in translation files. Fixes #4970.
Use this parameter to select the Cassini PDS Image Label. The file must
contain PDS labels for Cassini ISS data. This can be a detached label file with
pointer to the cube data.
NOTE: While we support most Cassini ISS Targets for ingestion, some of
the smaller bodies do not currently have support for parameters such as their body radii.
Therefore, spiceinit will fail when run on cubes created with these targets. The current
list of these target bodies is : ANTHE, AEGAEON, BERGELMIR, BESTLA, ERRIAPO, ERRIAPUS,
FORNJOT, GREIP, HATI, HYROKKIN, IJIRAQ, JARNSAXA, K07S4, KARI, KIVIUQ, LOGE, MUNDILFARI,
NARVI, PAALIAQ, SIARNAQ, SKADI, SKATHI, SKOLL, SURTUR, SUTTUNG, SUTTUNGR, TARVOS, TARQEQ,
THRYM, THRYMR, YMIR.
Use this parameter to select the output filename
NOTE: The following TARGET_NAMEs will be translated to 'Sky' in the
output cube's PVL: SKY, DARK SKY, S8_2004, S12_2004, S13_2004, S14_2004, S18_2004.
