ISIS Application Documentation
viknonoodle | Printer Friendly View | TOC | Home |
Remove periodic noise from a Viking image
| Overview | Parameters |
Description
VIKNONOODLE removes periodic noise, in the sample direction, from VIKING
images. The images should be run through LEVEL1 before VIKNONOODLE is
run on the images. This program is to be run before any cropping. For
best results, use trim to remove unwanted data from the sides first. No data
that lies between the two noise locations will be affected.
CategoriesRelated Objects and DocumentsApplicationsHistory
|
| U.S. Department of the Interior | U.S. Geological Survey ISIS | Privacy & Disclaimers | Astrogeology Research Program To contact us, please post comments and questions on the USGS Astrogeology Discussion Board To report a bug, or suggest a feature go to: ISIS Github File Modified: 02/21/2025 19:28:14 |
Parameter GroupsFiles
Parameters
|
| U.S. Department of the Interior | U.S. Geological Survey ISIS | Privacy & Disclaimers | Astrogeology Research Program To contact us, please post comments and questions on the USGS Astrogeology Discussion Board To report a bug, or suggest a feature go to: ISIS Github File Modified: 02/21/2025 19:28:14 |
Files: FROM
Description
The input cube with periodic noise in the sample direction.
| Type | cube |
|---|---|
| File Mode | input |
| Filter | *.cub |
Files: TO
Description
The resultant cube with the noise removed.
| Type | cube |
|---|---|
| File Mode | output |
| Pixel Type | real |
| Filter | *.cub |
Parameters: TOLERANCE
Description
The tolerance parameter is used to specify how strong the frequency must be to count as noise. The higher the tolerance level, the less likely the frequency will be cleaned. However, if the tolerance is too low, it may wipe out good data and some banding may occur around the noise location. (Note: most noise frequencies have a magnitude greater than 1.0).
| Type | double |
|---|---|
| Default | 0.5 |