USGS

Isis 2 Documentation


bandfloat Documentation

bandfloat - Apply separate base/multiplier to each band in a cube
"bandfloat" will apply a separate base/multiplier to each band in an
8-bit or 16-bit Themis cube to produce a 32-bit floating point output
cube. This program requires that the BAND_BIN group contain the
base/multiplier for each band in the BAND_BIN_BASE and
BAND_BIN_MULTIPLIER keywords. All keywords in the FROM file will be
propagated to the output file.

PROGRAMMER: Janet Barrett, USGS, Flagstaff, AZ

ParmDescriptionDefault
FROM
Input cube file name
  (default extension is .cub)
NONE
TO
Output cube file name
  (default extension is .cub)
NONE

ADDITIONAL NOTES:

ParmDescription
FROM
Input cube file name. If the file extension is omitted,
then ".cub" will be assumed. This is an 8-bit or 16-bit
Themis cube which contains a separate base/multiplier for
each band in the cube. The base/multiplier for each band
must be stored in the BAND_BIN_BASE/BAND_BIN_MULTIPLIER
keywords in the BAND_BIN group.
TO
Output cube file name.  If the file extension is omitted,
then ".cub" will be assumed. This is a 32-bit Themis cube
which results from applying a separate base/multiplier to
each band in the FROM file.

Last updated: Jan 31 2005
File: pdfs2.html

Contact us online at the Isis Support Center: http://isisdist.wr.usgs.gov

ISIS Documentation Home Page