cd2isis Documentation

CD2ISIS - Convert PDS CDROM compressed and uncompressed image to ISIS

CD2ISIS - Reads a PDS image on a CDROM and converts it to ISIS format.

CD2ISIS handles VOYAGER and VIKING images stored on CDROM. A new feature
has been recently added to read PDS image files with detached labels.
This new feature currently has been tested only on the PRE-MAGELLAN
CDROM disk. If a PDS detached LABEL/IMAGE files are  to be read, provide
the name of the label file (*.lbl) in the FROM= parameter.

CD2ISIS was developed to handle VOYAGER and VIKING images stored on
CDROMs in the PDS image file format.  The program can convert both
compressed and uncompressed PDS image files which conform to version 1.0
of PDS' Object Descriptor Language (ODL). The original VOYAGER Space
Science Sampler disc (March 25, 1987) and the PDS interactive Data
Interchange Space Science Sampler disc of the same date can not be
accessed by this program.  You will need to continue to use the original
CDIN program for accessing this data.

Programmer: Kris Becker, USGS, Flagstaff, Az

Input image file name on
the CDROM. If a detached
PDS label/image file then
enter name of label file

NONE

Output image file name

NONE

Name of temporary
intermediate file

"cd2pics.pic"

Swap bytes for 16-bit
File? (YES or NO)

NO

not used

1

not used

1

not used

0

not used

0

not used

1.

not used

1.

ADDITIONAL NOTES:

Parm	Description
FROM	Device, directory and file name specification of PDS image on the CDROM. Shown below is an example of a file specification. FROM=/cdrom/miranda/c2684xxx/c2684629.imq Besure to include the directory, name, and extenstion in the file specification. If the file to be read is a PDS detached label/image file then enter the name of the detached label.
TO	Output image file name. output of CD2ISIS is an ISIS formatted file.
TMPFILE	Intermediate temporary file name created during the processing. This could potentially be a large file depending on the size of the input image. This file name could also contain a path if the file should need to be created in another directory. Note that this file is deleted upon completion of the generation of the output ISIS cube file.
SWAP	This parameter allows a user to specify that 16-bit and 32-bit integer bytes are to be swapped before processing the pixels. Sometimes the byte order of an image file needs to be reversed. Permitted values are YES or NO
SL	Not used by the program.
SS	Not used by the program.
NL	Not used by the program.
NS	Not used by the program.
LINC	Not used by the program.
SINC	Not used by the program.