spice2rand Documentation

spice2rand - Convert SPICE and match points to RAND format
This program will create two files to be sent to RAND.  The first file
will contain the SPICE information in RAND format and the second file
will contain the match points in RAND format.  The program will also
report the errors in fit between the match points for the current
camera angles on the labels.  These errors will be printed even if
the SPICE and MATCH files are not created.  Due to the limitations of
TAE, if more than 50 cubes are to be entered, they must be put into a
file and that file name is entered in FROMLIST.
NOTE: All cube files are opened read only, so it is safe to kill job!

PROGRAMMER: Kay Edwards, U.S.G.S., Flagstaff

Input cube file names
(default extension is .cub)
           or

--

File containing list of input
cube file names
(no default extension)

--

Name of output SPICE file in
RAND format

--

Name of output match point file
in RAND format

--

Name of output file of bad fits

--

Name of output file of cubes
with no match points.

--

Tolerance of bad fit

6.0

Error checking option (BOTH,TOL)

TOL

ID assigned to first matchpoint

--

Matchpoint prefix

--

File identification option
valid="FSC","PRODID"

NONE

Shutter Center Time
YES, NO

"NO"

ADDITIONAL NOTES:

Parm	Description
FROM	Input cube file names If the extension is omitted, then ".cub" will be assumed. An error will be printed for any cubes that are not matched to any other cube in the list. Up to 50 cubes can be listed. If there are more than 50, use FROMLIST.
FROMLIST	Due to the limitations of TAE, if more than 50 cubes are to be listed, their names must be put into a file. A maximum of 128 characters is allowed for each file name. List one file per line. A maximum of 44000 cubes may be listed. This file can contain cubes that will be ignored if the first column of those cubes contains a !.
SPICE	If no name is entered for the SPICE file, no file will be written, but errors will be reported.
MATCH	If no name is entered for the match point file, no file will be written, but errors will be reported.
NOMAT	This file will contain a list of cubes that do not have any match points. If no name is entered, this file will not be produced.
ERR	If ERR=BOTH, the error tolerance will be checked and the number of points will be checked. At least 3 points must exist on the labels for each pair of cubes or an error will be printed. If ERR=TOL only the error tolerance will be checked.
MATSTART	Enter the numeric identifier for the first matchpoint in the list. The first 1000 numbers are reserved for tie points, so MATSTART must be >= to 1001.
MATPRE	Enter an optional matchpoint prefix. For Galileo images Flagstaff processors should use a prefix of "F". This option is not available for Clementine images.
IDOPT	User must choose to have the images identified by FSC num- ber or product ID.
SHUTCENT	Shutter center time. Most of the time shutter close time, which is the default, will be used.