Project

General

Profile

Bug #2142

qview segfault issue with 3D plot tool

Added by Ian Humphrey over 3 years ago. Updated about 1 month ago.

Status:
Closed
Priority:
Normal
Category:
Applications
Target version:
Impact:

qview

Software Version:
Test Reviewer:

Description

Summary
When using the 3D plot tool, if you create a spectral plot from a particular cube and then close the cube in qview, selecting another tool and then selecting the 3D plot tool will create a seg fault. Discovered while running qview on prog16. This bug exists in isis3.4.6 and the most recent clean beta build (isis3beta2014-07-24).

Test Data
/work/users/ihumphrey/qviewData/Peaks.cub
/work/users/ihumphrey/qviewData/C1514302573_1.ir.cub

Steps to Reproduce
Run qview.
Open one of the test data cubes.
Select the 3D plot tool and create a spectral plot.
Close the test data cube (but keep the spectral plot window open).
Select the 2D plot tool.
Select the 3D plot tool.

History

#1 Updated by Tammy Becker over 3 years ago

  • Status changed from New to Acknowledged

#2 Updated by Stuart Sides 2 months ago

  • Status changed from Acknowledged to Assigned
  • Assignee set to Summer Stapleton
  • Target version set to 3.5.2 (2017-01-31 Jan)

#3 Updated by Makayla Shepherd about 2 months ago

  • Status changed from Assigned to In Progress

#4 Updated by Summer Stapleton about 2 months ago

  • Status changed from In Progress to Resolved

#5 Updated by Tammy Becker about 2 months ago

Can this ticket be build so I can test it from astrovm4?

Thank you!

#6 Updated by Ian Humphrey about 2 months ago

Hi Tammy, you can test for astrovm4 by setting your isis as follows:

setisis /work/projects/isis/latest/m02142_prog24/m02142/trunk/isis

#7 Updated by Summer Stapleton about 2 months ago

Hi Tammy, let me know it this worked for you.

#8 Updated by Tammy Becker about 1 month ago

Unfortunately, on astrovm4 qview fails immediately with a "Segmentation fault" under /work/projects/isis/latest/m02142_prog24/m02142/trunk/

#9 Updated by Tammy Becker about 1 month ago

  • Status changed from Resolved to Feedback

#10 Updated by Summer Stapleton about 1 month ago

Confirmed just now that I was able to run qview on astrovm4 without segfault under /work/projects/isis/latest/m02142_prog24/m02142/trunk/isis. Maybe try it one more time and let me know?

#11 Updated by Tammy Becker about 1 month ago

I finally got to test this fix! qview no longer fails if I close the cube after running the 3D plot tool. I like the behavior that the 3D spectral plot remains. I was able to reopen the cube.

The build I tested successfully was under /work/projects/isis/latest/m02142_prog24/m02142/trunk

Thank you!

#12 Updated by Ian Humphrey about 1 month ago

  • Status changed from Feedback to Closed
  • Test Reviewer set to Tammy Becker

Also available in: Atom PDF