Project

General

Profile

Feature #4009

Please add Radius and Slope as new parameters in Phocube.

Added by Timothy Titus about 2 years ago. Updated 11 months ago.

Status:
Rejected
Priority:
Normal
Assignee:
Category:
Applications
Target version:
Impact:
Software Version:
Test Reviewer:

Description

Please add Local Radius and Local Slope as new parameters in Phocube. This would actually be three parameters as slope has both a magnitude and direction. The user may want the option for either magnitude/azimuth or dz/dx (East West Slope) & dz/dy (North - South).

Also, add these features to camdev.

History

#1 Updated by Tammy Becker about 2 years ago

  • Status changed from New to Acknowledged

An FYI, the application 'fx' will compute local radius for every image pixel.

#2 Updated by Timothy Titus about 2 years ago

FX does not like cubes that have already been projected. This is why it would be good to have radius (or elevation) and slope as output parameters either in PHOCUBE or in a new application that is like PHOCUBE but focuses on geometry - perhaps call it GEOCUBE?

#3 Updated by Stuart Sides about 1 year ago

  • Target version set to 3.5.1 (Sprint 1)

#4 Updated by Ian Humphrey about 1 year ago

  • Description updated (diff)

#5 Updated by Ian Humphrey about 1 year ago

  • Assignee set to Kaj Williams

#6 Updated by Kaj Williams about 1 year ago

  • Status changed from Acknowledged to In Progress

#7 Updated by Kaj Williams about 1 year ago

  • Test Reviewer set to Stuart Sides

#8 Updated by Kaj Williams about 1 year ago

  • Status changed from In Progress to Rejected

Rejected due to recommendation of the ticket originator. It is recommended that we use "fx" to acquire radius and "slpmap" to get slopes.

#9 Updated by Stuart Sides 11 months ago

  • Target version changed from 3.5.1 (Sprint 1) to 3.5.1 (2017-08-08 Aug)

Also available in: Atom PDF