Project

General

Profile

Bug #5248

AutoReg sub-pixel failure results in the registration using the previous value

Added by Makayla Shepherd 3 months ago. Updated 2 months ago.

Status:
In Progress
Priority:
Normal
Category:
API
Target version:
-
Impact:
Software Version:
Test Reviewer:

Description

When using sub-pixel registration, if the sub-pixel registration fails the best matched value gets set to the previous successful registration match values. AutoReg should be setting the best-matched values to the whole pixel.

This was found when outputting all of the registration values including the failures (found during EIS testing).

History

#1 Updated by Lynn Weller 3 months ago

If subpixel registration fails, the point's location should be set back to the original location so that further attempts at registration can be made after the fact. Why would we set it the whole pixel match value - it failed registration. Am I not understanding something? What provoked this post?

#2 Updated by Makayla Shepherd 3 months ago

  • Description updated (diff)
  • Status changed from In Progress to Resolved

#3 Updated by Makayla Shepherd 3 months ago

  • Description updated (diff)

#4 Updated by Tammy Becker 2 months ago

what is the resolution to this issue?

#5 Updated by Makayla Shepherd 2 months ago

  • Status changed from Resolved to In Progress

Also available in: Atom PDF