This class represents one application in the pipeline. More...

#include <PipelineApplication.h>

Collaboration diagram for Isis::PipelineApplication:

Public Types
enum	NameModifierType { ConstantStrings }
	This is used for branches. More...

enum	CustomParameterValue { LastOutput, LastAppOutputList, LastAppOutputListNoMerge }
	This is used to set custom values that must be calculated on the fly. More...

Public Member Functions
	PipelineApplication (QString appName, Pipeline *pipe)
	Constructs the first pipeline application. More...

	PipelineApplication (QString appName, PipelineApplication *previous)
	Constructs subsequent pipeline applications. More...

	~PipelineApplication ()
	This is the destructor. More...

const QString &	Name () const
	Get the name of this pipeline application. More...

const std::vector< QString > &	ParamString () const
	Get the parameters for running this program; one element in the vector per run. More...

const std::vector< QString > &	InputBranches () const
	Get the branches this program expects as input. More...

const std::vector< QString > &	OutputBranches () const
	Get the branches this program has as output. More...

void	Enable ()
	This method enables this program to be run. More...

void	Disable ()
	This method disables this program, causing it to be ignored. More...

const bool &	Enabled () const
	Returns true if this program will be run. More...

void	SetInputParameter (const QString &inputParamName, bool supportsVirtualBands)
	Set the input parameter for this application and whether or not this application supports the virtual bands functionality. More...

void	SetInputParameter (const QString &inputParamName, CustomParameterValue value, bool supportsVirtualBands)
	Set the input parameter for this application and whether or not this application supports the virtual bands functionality. More...

void	SetOutputParameter (const QString &outputParamName, const QString &outNameModifier, const QString &outFileExtension="cub")
	Set the output parameter for this application and it's naming convention. More...

void	SetOutputParameter (const QString &branch, const QString &outputParamName, const QString &outNameModifier, const QString &outFileExtension)
	Set the output parameter for a branch of this application and it's naming convention. More...

void	AddBranch (const QString &modString, NameModifierType type)
	This method adds branch to this program. More...

void	AddParameter (const QString &inputParamName, const QString &appParamName)
	This method adds knowledge of a parameter to the application. More...

void	AddParameter (const QString &branch, const QString &inputParamName, const QString &appParamName)
	This method adds knowledge of a parameter to this application, that will only affect the specified branch. More...

void	AddConstParameter (const QString &appParamName, const QString &appParamValue)
	This method adds a parameter to this application with a known value (does not get it from the user interface, must be specified). More...

void	AddConstParameter (const QString &branch, const QString &appParamName, const QString &appParamValue)
	This method adds a parameter to this application with a known value (does not get it from the user interface, must be specified) that only affects a single branch. More...

void	AddParameter (const QString &appParamName, CustomParameterValue value)
	This method adds a parameter with a calculated value (special) to this application. More...

void	AddParameter (const QString &branch, const QString &appParamName, CustomParameterValue value)
	This method adds a parameter with a calculated value (special) to this application that only affects the specified branch. More...

QString	OutputNameModifier ()
	This returns this application's output name modifier. More...

QString	OutputExtension ()
	This returns this application's output file name's extension. More...

std::vector< QString > &	GetOutputs ()
	This returns this application's output files. Only valid after BuildParamString is called. More...

std::vector< QString >	TemporaryFiles ()
	This method returns a list of the temporary files generated by this program. More...

void	SetNext (PipelineApplication *next)
	Link to the next application in the pipeline. More...

void	SetPrevious (PipelineApplication *prev)
	Link to the previous application in the pipeline. More...

void	BuildParamString ()
	This method calculates the inputs, outputs and necessary calls to this program for the pipeline. More...

PipelineApplication *	Next () const
	This returns the next enabled pipeline application or null. More...

PipelineApplication *	Previous () const
	This returns the last enabled pipeline application or null. More...

PipelineApplication *	PreviousOutputer () const
	This returns the previous enabled pipeline application that makes output or null. More...

bool	SupportsVirtualBands ()
	Returns true if virtual bands are supported. More...

void	SetVirtualBands (std::vector< QString > bands)
	Set the virtual bands that this application is to apply. More...

void	EnableBranch (QString branch, bool flag)
	Enable/Disable Branch given the branch name. More...

bool	BranchEnabled (int branch)
	Check whether a branch is enabled given branch index. More...

void	SetContinue (bool pbFlag)
	Set the continue flag status. More...

bool	Continue (void)
	Get the continue flag status. More...

Detailed Description

This class represents one application in the pipeline.

This contains methods for setting application-specific parameters, such as application inputs and outputs. Only pipeline should be instantiating these!

The applications work as a doubly-linked list in order to calculate inputs and outputs correctly. Calling SetNext or SetPrevious is not recommended.

Author: 2008-08-04 Steven Lambright

Member Enumeration Documentation

◆ CustomParameterValue

enum Isis::PipelineApplication::CustomParameterValue

This is used to set custom values that must be calculated on the fly.

Enumerator
LastOutput	The very last output file. Do not use this for input parameters if it's not necessary, that is done automatically.
LastAppOutputList	A list of files from the last run application's output.
LastAppOutputListNoMerge	A list of files from the last run application's output.

◆ NameModifierType

enum Isis::PipelineApplication::NameModifierType

This is used for branches.

Right now, only known strings can be used to specify each branch.

Enumerator
ConstantStrings	Known strings.

Constructor & Destructor Documentation

◆ PipelineApplication() [1/2]

Isis::PipelineApplication::PipelineApplication	(	QString	appName,
		Pipeline *	pipe
	)

Constructs the first pipeline application.

Parameters

appName	The name of this application
pipe	The pipeline

History:: 2010-12-20 Sharmila Prasad Initialise & enable the branches

References Isis::Pipeline::OriginalBranches().

◆ PipelineApplication() [2/2]

Isis::PipelineApplication::PipelineApplication	(	QString	appName,
		PipelineApplication *	previous
	)

Constructs subsequent pipeline applications.

Parameters

appName	The name of this application
previous	The previously last pipeline application

History:: 2010-12-20 Sharmila Prasad Initialise & enable the branches

◆ ~PipelineApplication()

Isis::PipelineApplication::~PipelineApplication ( )

inline

This is the destructor.

Member Function Documentation

◆ AddBranch()

void Isis::PipelineApplication::AddBranch	(	const QString &	modString,
		NameModifierType	type
	)

This method adds branch to this program.

A branch means with one input, multiple outputs are automatically created.

Example:

thm2isis from=input.img to=output.cub

In this code, thm2isis could actually create output.even.cub and output.odd.cub. The branches are then "even" and "odd". This is used only for the case where the program outputs multiple images based upon one "TO" parameter.

Parameters

modString	Branch name
type	Modifier type; currently only supports constant strings

History:: 2010-12-20 Sharmila Prasad Enable the branch at the time of creation

References _FILEINFO_, and Isis::IException::Programmer.

◆ AddConstParameter() [1/2]

void Isis::PipelineApplication::AddConstParameter	(	const QString &	appParamName,
		const QString &	appParamValue
	)

This method adds a parameter to this application with a known value (does not get it from the user interface, must be specified).

Parameters

appParamName	Name of the parameter
appParamValue	Value of the parameter

◆ AddConstParameter() [2/2]

void Isis::PipelineApplication::AddConstParameter	(	const QString &	branch,
		const QString &	appParamName,
		const QString &	appParamValue
	)

This method adds a parameter to this application with a known value (does not get it from the user interface, must be specified) that only affects a single branch.

Parameters

branch	Branch this parameter affects
appParamName	Name of the parameter
appParamValue	Value of the parameter

◆ AddParameter() [1/4]

void Isis::PipelineApplication::AddParameter	(	const QString &	appParamName,
		CustomParameterValue	value
	)

This method adds a parameter with a calculated value (special) to this application.

Parameters

appParamName	Parameter name
value	Value type

◆ AddParameter() [2/4]

void Isis::PipelineApplication::AddParameter	(	const QString &	branch,
		const QString &	appParamName,
		CustomParameterValue	value
	)

This method adds a parameter with a calculated value (special) to this application that only affects the specified branch.

Parameters

branch	Branch this parameter affects
appParamName	Parameter name
value	Value type

◆ AddParameter() [3/4]

void Isis::PipelineApplication::AddParameter	(	const QString &	branch,
		const QString &	inputParamName,
		const QString &	appParamName
	)

This method adds knowledge of a parameter to this application, that will only affect the specified branch.

The parameter value is taken directly from the user interface; internal defaults are supported by not using the parameter.

Parameters

branch	The branch this parameter affects
inputParamName	Parameter in the proc program
appParamName	Parameter in the this application

References IsisAml::GetAsString(), Isis::Application::GetUserInterface(), and IsisAml::WasEntered().

◆ AddParameter() [4/4]

void Isis::PipelineApplication::AddParameter	(	const QString &	inputParamName,
		const QString &	appParamName
	)

This method adds knowledge of a parameter to the application.

The parameter value is taken directly from the user interface.

Parameters

inputParamName	Parameter in the proc program
appParamName	Parameter in this application

References IsisAml::GetAsString(), Isis::Application::GetUserInterface(), and IsisAml::WasEntered().

◆ BranchEnabled()

bool Isis::PipelineApplication::BranchEnabled ( int branch )

inline

Check whether a branch is enabled given branch index.

Author: Sharmila Prasad (12/20/2010)

Parameters

branch - index into the branch

Returns: bool - true/false

Referenced by BuildParamString().

◆ BuildParamString()

void Isis::PipelineApplication::BuildParamString ( )

This method calculates the inputs, outputs and necessary calls to this program for the pipeline.

This should only be used by Pipeline.

History:: 2010-12-20 Sharmila Prasad Set appropriate inputs to the branch taking into consideration whether the previous branch was enabled/disabled. Also set the input list accordingly if needlist is true

References _FILEINFO_, Isis::FileName::baseName(), BranchEnabled(), GetOutputs(), Isis::PipelineParameter::IsSpecial(), Isis::IsSpecial(), Name(), OutputBranches(), Previous(), Isis::IException::Programmer, and Isis::PipelineParameter::Special().

◆ Continue()

bool Isis::PipelineApplication::Continue ( void )

inline

Get the continue flag status.

Author: Sharmila Prasad (2/9/2011)

Returns: bool - return continue status

◆ Disable()

void Isis::PipelineApplication::Disable ( )

inline

This method disables this program, causing it to be ignored.

◆ Enable()

void Isis::PipelineApplication::Enable ( )

inline

This method enables this program to be run.

◆ EnableBranch()

void Isis::PipelineApplication::EnableBranch	(	QString	branch,
		bool	flag
	)

inline

Enable/Disable Branch given the branch name.

Author: Sharmila Prasad (12/20/2010)

Parameters

branch	- branch name
flag	- true/false

◆ Enabled()

const bool& Isis::PipelineApplication::Enabled ( ) const

inline

Returns true if this program will be run.

Referenced by Isis::Pipeline::FinalOutput(), Next(), Isis::operator<<(), OutputBranches(), Previous(), and PreviousOutputer().

◆ GetOutputs()

vector< QString > & Isis::PipelineApplication::GetOutputs ( )

This returns this application's output files. Only valid after BuildParamString is called.

Referenced by BuildParamString().

◆ InputBranches()

const std::vector<QString>& Isis::PipelineApplication::InputBranches ( ) const

inline

Get the branches this program expects as input.

◆ Name()

const QString& Isis::PipelineApplication::Name ( ) const

inline

Get the name of this pipeline application.

Referenced by BuildParamString(), and Isis::operator<<().

◆ Next()

PipelineApplication* Isis::PipelineApplication::Next ( ) const

inline

This returns the next enabled pipeline application or null.

References Enabled(), and Next().

Referenced by Next().

◆ OutputBranches()

const std::vector<QString>& Isis::PipelineApplication::OutputBranches ( ) const

inline

Get the branches this program has as output.

References Enabled(), OutputBranches(), and Previous().

Referenced by BuildParamString(), Isis::Pipeline::FinalOutput(), and OutputBranches().

◆ OutputExtension()

QString Isis::PipelineApplication::OutputExtension ( )

inline

This returns this application's output file name's extension.

References OutputExtension(), and Previous().

Referenced by Isis::Pipeline::FinalOutput(), and OutputExtension().

◆ OutputNameModifier()

QString Isis::PipelineApplication::OutputNameModifier ( )

inline

This returns this application's output name modifier.

References OutputNameModifier(), and Previous().

Referenced by Isis::Pipeline::FinalOutput(), and OutputNameModifier().

◆ ParamString()

const std::vector<QString>& Isis::PipelineApplication::ParamString ( ) const

inline

Get the parameters for running this program; one element in the vector per run.

Referenced by Isis::operator<<().

◆ Previous()

PipelineApplication* Isis::PipelineApplication::Previous ( ) const

inline

This returns the last enabled pipeline application or null.

References Enabled(), and Previous().

Referenced by BuildParamString(), Isis::Pipeline::FinalOutput(), OutputBranches(), OutputExtension(), OutputNameModifier(), Previous(), and PreviousOutputer().

◆ PreviousOutputer()

PipelineApplication* Isis::PipelineApplication::PreviousOutputer ( ) const

inline

This returns the previous enabled pipeline application that makes output or null.

References Enabled(), and Previous().

◆ SetContinue()

void Isis::PipelineApplication::SetContinue ( bool pbFlag )

inline

Set the continue flag status.

Author: Sharmila Prasad (2/9/2011)

Parameters

pbFlag - true/false

◆ SetInputParameter() [1/2]

void Isis::PipelineApplication::SetInputParameter	(	const QString &	inputParamName,
		bool	supportsVirtualBands
	)

Set the input parameter for this application and whether or not this application supports the virtual bands functionality.

It supports the virtual bands functionality if the input is an Isis cube.

Parameters

inputParamName	Name of the input parameter, typically "FROM"
supportsVirtualBands	True if this application supports virtual bands

◆ SetInputParameter() [2/2]

void Isis::PipelineApplication::SetInputParameter	(	const QString &	inputParamName,
		CustomParameterValue	value,
		bool	supportsVirtualBands
	)

Set the input parameter for this application and whether or not this application supports the virtual bands functionality.

It supports the virtual bands functionality if the input is an Isis cube.

Parameters

inputParamName	Name of the input parameter, typically "FROM"
value	Custom parameter value; Recommended to use an alternate SetInputParameter instead of specifying LastOutput
supportsVirtualBands	True if this application supports virtual bands

◆ SetNext()

void Isis::PipelineApplication::SetNext ( PipelineApplication * next )

inline

Link to the next application in the pipeline.

Parameters

next	The next pipeline application

Referenced by Isis::Pipeline::AddToPipeline().

◆ SetOutputParameter() [1/2]

void Isis::PipelineApplication::SetOutputParameter	(	const QString &	branch,
		const QString &	outputParamName,
		const QString &	outNameModifier,
		const QString &	outFileExtension
	)

Set the output parameter for a branch of this application and it's naming convention.

This is meant for an application that splits the input into two output files via two output parameters.

Parameters

branch	Branch this output parameter applies to
outputParamName	Name of the output parameter
outNameModifier	Modifier to add to the cube name, such as "lev1"
outFileExtension	Extension of the output file (usually "cub" for cube)

◆ SetOutputParameter() [2/2]

void Isis::PipelineApplication::SetOutputParameter	(	const QString &	outputParamName,
		const QString &	outNameModifier,
		const QString &	outFileExtension = `"cub"`
	)

Set the output parameter for this application and it's naming convention.

Parameters

outputParamName	Name of the output parameter
outNameModifier	Modifier to add to the cube name, such as "lev1"
outFileExtension	Extension of the output file (usually "cub" for cube)

◆ SetPrevious()

void Isis::PipelineApplication::SetPrevious ( PipelineApplication * prev )

inline

Link to the previous application in the pipeline.

Parameters

prev	The previous pipeline application

Referenced by Isis::Pipeline::AddToPipeline().

◆ SetVirtualBands()

void Isis::PipelineApplication::SetVirtualBands ( std::vector< QString > bands )

Set the virtual bands that this application is to apply.

Empty for none.

Parameters

bands The virtual bands string, excluding the "+". For example, "2,4-5,8"

◆ SupportsVirtualBands()

bool Isis::PipelineApplication::SupportsVirtualBands ( )

Returns true if virtual bands are supported.

Returns: bool Virtual bands supported

◆ TemporaryFiles()

vector< QString > Isis::PipelineApplication::TemporaryFiles ( )

This method returns a list of the temporary files generated by this program.

Returns: vector<QString> The temporary files

Referenced by Isis::operator<<().

The documentation for this class was generated from the following files:

/home/isis3mgr/repos/ISIS3/isis/src/base/objs/Pipeline/PipelineApplication.h
/home/isis3mgr/repos/ISIS3/isis/src/base/objs/Pipeline/PipelineApplication.cpp

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

◆ CustomParameterValue

◆ NameModifierType

Constructor & Destructor Documentation

◆ PipelineApplication() [1/2]

◆ PipelineApplication() [2/2]

◆ ~PipelineApplication()

Member Function Documentation

◆ AddBranch()

◆ AddConstParameter() [1/2]

◆ AddConstParameter() [2/2]

◆ AddParameter() [1/4]

◆ AddParameter() [2/4]

◆ AddParameter() [3/4]

◆ AddParameter() [4/4]

◆ BranchEnabled()

◆ BuildParamString()

◆ Continue()

◆ Disable()

◆ Enable()

◆ EnableBranch()

◆ Enabled()

◆ GetOutputs()

◆ InputBranches()

◆ Name()

◆ Next()

◆ OutputBranches()

◆ OutputExtension()

◆ OutputNameModifier()

◆ ParamString()

◆ Previous()

◆ PreviousOutputer()

◆ SetContinue()

◆ SetInputParameter() [1/2]

◆ SetInputParameter() [2/2]

◆ SetNext()

◆ SetOutputParameter() [1/2]

◆ SetOutputParameter() [2/2]

◆ SetPrevious()

◆ SetVirtualBands()

◆ SupportsVirtualBands()

◆ TemporaryFiles()