Represents a 3D area (a 3D "cube") More...

#include <Area3D.h>

Collaboration diagram for Isis::Area3D:

Public Member Functions
	Area3D ()
	The empty constructor creates an invalid 3D area.

	Area3D (const Displacement &startX, const Displacement &startY, const Displacement &startZ, const Distance &width, const Distance &height, const Distance &depth)
	Creates a 3D area based on the supplied dimensions.

	Area3D (const Displacement &startX, const Displacement &startY, const Displacement &startZ, const Displacement &endX, const Displacement &endY, const Displacement &endZ)
	Creates a 3D area based on the supplied start and end points.

	Area3D (const Area3D &areaToCopy)
	The copy constructor.

virtual	~Area3D ()
	The destructor frees allocated memory.

Displacement	getStartX () const
	Returns the leftmost X position of the 3D area.

Displacement	getStartY () const
	Returns the topmost Y position of the 3D area.

Displacement	getStartZ () const
	Returns the frontmost Z position of the 3D area.

Distance	getWidth () const
	Returns the width (in the X dimension) of the 3D area.

Distance	getHeight () const
	Returns the height (in the Y dimension) of the 3D area.

Distance	getDepth () const
	Returns the depth (in the Z dimension) of the 3D area.

Displacement	getEndX () const
	Returns the rightmost X position of the 3D area.

Displacement	getEndY () const
	Returns the bottommost Y position of the 3D area.

Displacement	getEndZ () const
	Returns the backmost Z position of the 3D area.

void	setStartX (const Displacement &startX)
	Sets the leftmost X position.

void	setStartY (const Displacement &startY)
	Sets the topmost Y position.

void	setStartZ (const Displacement &startZ)
	Sets the frontmost Z position.

void	moveStartX (const Displacement &startX)
	Moves the leftmost X position of the 3D area.

void	moveStartY (const Displacement &startY)
	Moves the topmost Y position of the 3D area.

void	moveStartZ (const Displacement &startZ)
	Moves the frontmost Z position of the 3D area.

void	setWidth (const Distance &width)
	Changes the width of the 3D area.

void	setHeight (const Distance &height)
	Changes the height of the 3D area.

void	setDepth (const Distance &depth)
	Changes the depth of the 3D area.

void	setEndX (const Displacement &endX)
	Sets the rightmost X position.

void	setEndY (const Displacement &endY)
	Sets the bottommost Y position.

void	setEndZ (const Displacement &endZ)
	Sets the backmost Z position.

void	moveEndX (const Displacement &endX)
	Moves the rightmost X position of the 3D area.

void	moveEndY (const Displacement &endY)
	Moves the bottommost Y position of the 3D area.

void	moveEndZ (const Displacement &endZ)
	Moves the backmost Z position of the 3D area.

void	setXDimension (const Displacement &startX, const Distance &width)
	Sets the X dimension of the 3D area.

void	setYDimension (const Displacement &startY, const Distance &height)
	Sets the Y dimension of the 3D area.

void	setZDimension (const Displacement &startZ, const Distance &depth)
	Sets the Z dimension of the 3D area.

Area3D	intersect (const Area3D &otherArea) const
	Returns the intersection of this 3D area with another 3D area.

bool	isValid () const
	Returns true if all of the positions of the 3D area are valid (i.e.

bool	operator== (const Area3D &otherArea) const
	Compares two areas with the == operator.

bool	operator!= (const Area3D &otherArea) const
	Compares two areas with the != operator.

Area3D &	operator= (const Area3D &areaToCopy)
	Assigns areaToCopy to this.

Protected Member Functions
virtual void	setArea (const Displacement &startX, const Displacement &startY, const Displacement &startZ, const Displacement &endX, const Displacement &endY, const Displacement &endZ)
	Sets the area.

Detailed Description

Represents a 3D area (a 3D "cube")

This class is designed to encapsulate the concept of a 3D area (i.e. Cube but not a Cube file).

Author: 2011-06-09 Jai Rideout and Steven Lambright

Constructor & Destructor Documentation

◆ Area3D() [1/4]

Isis::Area3D::Area3D ( )

The empty constructor creates an invalid 3D area.

Referenced by intersect().

◆ Area3D() [2/4]

Isis::Area3D::Area3D	(	const Displacement &	startX,
		const Displacement &	startY,
		const Displacement &	startZ,
		const Distance &	width,
		const Distance &	height,
		const Distance &	depth )

Creates a 3D area based on the supplied dimensions.

Parameters

startX	the leftmost X position
startY	the topmost Y position
startZ	the frontmost Z position
width	the width of the X dimension
height	the height of the Y dimension
depth	the depth of the Z dimension

References setArea().

◆ Area3D() [3/4]

Isis::Area3D::Area3D	(	const Displacement &	startX,
		const Displacement &	startY,
		const Displacement &	startZ,
		const Displacement &	endX,
		const Displacement &	endY,
		const Displacement &	endZ )

Creates a 3D area based on the supplied start and end points.

Parameters

startX	the leftmost X position
startY	the topmost Y position
startZ	the frontmost Z position
endX	the rightmost X position
endY	the bottommost Y position
endZ	the backmost Z position

References setArea().

◆ Area3D() [4/4]

Isis::Area3D::Area3D ( const Area3D & areaToCopy )

The copy constructor.

Parameters

areaToCopy the 3D area to copy into this

◆ ~Area3D()

Isis::Area3D::~Area3D ( )

virtual

The destructor frees allocated memory.

Member Function Documentation

◆ getDepth()

Distance Isis::Area3D::getDepth ( ) const

Returns the depth (in the Z dimension) of the 3D area.

Returns: Displacement The depth (in the Z dimension) of the 3D area

References getEndZ(), getStartZ(), and Isis::Distance::Meters.

◆ getEndX()

Displacement Isis::Area3D::getEndX ( ) const

Returns the rightmost X position of the 3D area.

Returns: Displacement The rightmost X position of the 3D area

Referenced by getWidth(), intersect(), moveEndX(), moveEndY(), moveEndZ(), moveStartX(), moveStartY(), moveStartZ(), operator==(), setDepth(), setEndY(), setEndZ(), setHeight(), setStartX(), setStartY(), setStartZ(), setYDimension(), and setZDimension().

◆ getEndY()

Displacement Isis::Area3D::getEndY ( ) const

Returns the bottommost Y position of the 3D area.

Returns: Displacement The bottommost Y position of the 3D area

Referenced by getHeight(), intersect(), moveEndX(), moveEndY(), moveEndZ(), moveStartX(), moveStartY(), moveStartZ(), operator==(), setDepth(), setEndX(), setEndZ(), setStartX(), setStartY(), setStartZ(), setWidth(), setXDimension(), and setZDimension().

◆ getEndZ()

Displacement Isis::Area3D::getEndZ ( ) const

Returns the backmost Z position of the 3D area.

Returns: Displacement The backmost Z position of the 3D area

Referenced by getDepth(), intersect(), moveEndX(), moveEndY(), moveEndZ(), moveStartX(), moveStartY(), moveStartZ(), operator==(), setEndX(), setEndY(), setHeight(), setStartX(), setStartY(), setStartZ(), setWidth(), setXDimension(), and setYDimension().

◆ getHeight()

Distance Isis::Area3D::getHeight ( ) const

Returns the height (in the Y dimension) of the 3D area.

Returns: Displacement The height (in the Y dimension) of the 3D area

References getEndY(), getStartY(), and Isis::Distance::Meters.

◆ getStartX()

Displacement Isis::Area3D::getStartX ( ) const

Returns the leftmost X position of the 3D area.

Returns: Displacement The leftmost X position of the 3D area

Referenced by getWidth(), intersect(), moveEndX(), moveEndY(), moveEndZ(), moveStartX(), moveStartY(), moveStartZ(), operator==(), setDepth(), setEndX(), setEndY(), setEndZ(), setHeight(), setStartY(), setStartZ(), setWidth(), setYDimension(), and setZDimension().

◆ getStartY()

Displacement Isis::Area3D::getStartY ( ) const

Returns the topmost Y position of the 3D area.

Returns: Displacement The topmost Y position of the 3D area

Referenced by getHeight(), intersect(), moveEndX(), moveEndY(), moveEndZ(), moveStartX(), moveStartY(), moveStartZ(), operator==(), setDepth(), setEndX(), setEndY(), setEndZ(), setHeight(), setStartX(), setStartZ(), setWidth(), setXDimension(), and setZDimension().

◆ getStartZ()

Displacement Isis::Area3D::getStartZ ( ) const

Returns the frontmost Z position of the 3D area.

Returns: Displacement The frontmost Z position of the 3D area

Referenced by getDepth(), intersect(), moveEndX(), moveEndY(), moveEndZ(), moveStartX(), moveStartY(), moveStartZ(), operator==(), setDepth(), setEndX(), setEndY(), setEndZ(), setHeight(), setStartX(), setStartY(), setWidth(), setXDimension(), and setYDimension().

◆ getWidth()

Distance Isis::Area3D::getWidth ( ) const

Returns the width (in the X dimension) of the 3D area.

Returns: Displacement The width (in the X dimension) of the 3D area

References getEndX(), getStartX(), and Isis::Distance::Meters.

◆ intersect()

Area3D Isis::Area3D::intersect ( const Area3D & otherArea ) const

Returns the intersection of this 3D area with another 3D area.

If there is no intersection, an invalid 3D area will be returned.

Parameters

otherArea the area to intersect this 3D area with

Returns: the 3D area that is the intersection

References Area3D(), getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and isValid().

◆ isValid()

bool Isis::Area3D::isValid ( ) const

Returns true if all of the positions of the 3D area are valid (i.e.

they are non-NULL).

Returns: bool True if all of the positions of the 3D area are valid (i.e. they are non-NULL).

Referenced by intersect().

◆ moveEndX()

void Isis::Area3D::moveEndX ( const Displacement & endX )

Moves the rightmost X position of the 3D area.

This method will not change the width of the 3D area.

Parameters

endX	the new rightmost X position

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ moveEndY()

void Isis::Area3D::moveEndY ( const Displacement & endY )

Moves the bottommost Y position of the 3D area.

This method will not change the height of the 3D area.

Parameters

endY	the new bottommost Y position

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ moveEndZ()

void Isis::Area3D::moveEndZ ( const Displacement & endZ )

Moves the backmost Z position of the 3D area.

This method will not change the depth of the 3D area.

Parameters

endZ	the new backmost Z position

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ moveStartX()

void Isis::Area3D::moveStartX ( const Displacement & startX )

Moves the leftmost X position of the 3D area.

This method will not change the width of the 3D area.

Parameters

startX the new leftmost X position

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ moveStartY()

void Isis::Area3D::moveStartY ( const Displacement & startY )

Moves the topmost Y position of the 3D area.

This method will not change the height of the 3D area.

Parameters

startY the new topmost Y position

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ moveStartZ()

void Isis::Area3D::moveStartZ ( const Displacement & startZ )

Moves the frontmost Z position of the 3D area.

This method will not change the depth of the 3D area.

Parameters

startZ the new frontmost Z position

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ operator!=()

bool Isis::Area3D::operator!= ( const Area3D & otherArea ) const

Compares two areas with the != operator.

Two uninitialized areas are equal to each other.

Parameters

otherArea This is the area we're comparing to, i.e. on the right hand side of the operator when used

Returns: True if this area is not the same as the given area

◆ operator=()

Area3D & Isis::Area3D::operator= ( const Area3D & areaToCopy )

Assigns areaToCopy to this.

areaToCopy is the right hand side of the '='.

Parameters

areaToCopy This is the area we're copying from

Returns: *this

◆ operator==()

bool Isis::Area3D::operator== ( const Area3D & otherArea ) const

Compares two areas with the == operator.

Two uninitialized areas are equal to each other.

Parameters

otherArea This is the area we're comparing to, i.e. on the right hand side of the operator when used

Returns: True if this area is the same as the given area

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), and getStartZ().

◆ setArea()

void Isis::Area3D::setArea	(	const Displacement &	startX,
		const Displacement &	startY,
		const Displacement &	startZ,
		const Displacement &	endX,
		const Displacement &	endY,
		const Displacement &	endZ )

protectedvirtual

Sets the area.

This method may be overridden in child classes if more control is needed when setting 3D area members to reflect the new area. All other setter methods call this method to change members of this class.

This method throws an exception if inverted coordinates are given, and it makes this 3D area invalid if invalid coordinates are given.

Parameters

startX	the new leftmost X position
startY	the new topmost Y position
startZ	the new frontmost Z position
endX	the new rightmost X position
endY	the new bottommost Y position
endZ	the new backmost Z position

References _FILEINFO_, and Isis::IException::Programmer.

Referenced by Area3D(), Area3D(), moveEndX(), moveEndY(), moveEndZ(), moveStartX(), moveStartY(), moveStartZ(), setDepth(), setEndX(), setEndY(), setEndZ(), setHeight(), setStartX(), setStartY(), setStartZ(), setWidth(), setXDimension(), setYDimension(), and setZDimension().

◆ setDepth()

void Isis::Area3D::setDepth ( const Distance & depth )

Changes the depth of the 3D area.

Parameters

depth the new depth of the 3D area

References getEndX(), getEndY(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ setEndX()

void Isis::Area3D::setEndX ( const Displacement & endX )

Sets the rightmost X position.

This method may change the width of the 3D area.

Parameters

endX	the new rightmost X position

References getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ setEndY()

void Isis::Area3D::setEndY ( const Displacement & endY )

Sets the bottommost Y position.

This method may change the height of the 3D area.

Parameters

endY	the new bottommost Y position

References getEndX(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ setEndZ()

void Isis::Area3D::setEndZ ( const Displacement & endZ )

Sets the backmost Z position.

This method may change the depth of the 3D area.

Parameters

endZ	the new backmost Z position

References getEndX(), getEndY(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ setHeight()

void Isis::Area3D::setHeight ( const Distance & height )

Changes the height of the 3D area.

Parameters

height the new height of the 3D area

References getEndX(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ setStartX()

void Isis::Area3D::setStartX ( const Displacement & startX )

Sets the leftmost X position.

This method may change the width of the 3D area.

Parameters

startX the new leftmost X position

References getEndX(), getEndY(), getEndZ(), getStartY(), getStartZ(), and setArea().

◆ setStartY()

void Isis::Area3D::setStartY ( const Displacement & startY )

Sets the topmost Y position.

This method may change the height of the 3D area.

Parameters

startY the new topmost Y position

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartZ(), and setArea().

◆ setStartZ()

void Isis::Area3D::setStartZ ( const Displacement & startZ )

Sets the frontmost Z position.

This method may change the depth of the 3D area.

Parameters

startZ the new frontmost Z position

References getEndX(), getEndY(), getEndZ(), getStartX(), getStartY(), and setArea().

◆ setWidth()

void Isis::Area3D::setWidth ( const Distance & width )

Changes the width of the 3D area.

Parameters

width the new width of the 3D area

References getEndY(), getEndZ(), getStartX(), getStartY(), getStartZ(), and setArea().

◆ setXDimension()

void Isis::Area3D::setXDimension	(	const Displacement &	startX,
		const Distance &	width )

Sets the X dimension of the 3D area.

This method may change the X positions and the width of the 3D area.

Parameters

startX	the new leftmost X position
width	the new width of the 3D area

References getEndY(), getEndZ(), getStartY(), getStartZ(), and setArea().

◆ setYDimension()

void Isis::Area3D::setYDimension	(	const Displacement &	startY,
		const Distance &	height )

Sets the Y dimension of the 3D area.

This method may change the Y positions and the height of the 3D area.

Parameters

startY	the new topmost Y position
height	the new height of the 3D area

References getEndX(), getEndZ(), getStartX(), getStartZ(), and setArea().

◆ setZDimension()

void Isis::Area3D::setZDimension	(	const Displacement &	startZ,
		const Distance &	depth )

Sets the Z dimension of the 3D area.

This method may change the Z positions and the depth of the 3D area.

Parameters

startZ	the new frontmost Z position
depth	the new depth of the 3D area

References getEndX(), getEndY(), getStartX(), getStartY(), and setArea().

The documentation for this class was generated from the following files:

/Users/astamile/ISIS3/isis/src/base/objs/Area3D/Area3D.h
/Users/astamile/ISIS3/isis/src/base/objs/Area3D/Area3D.cpp

Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ Area3D() [1/4]

◆ Area3D() [2/4]

◆ Area3D() [3/4]

◆ Area3D() [4/4]

◆ ~Area3D()

Member Function Documentation

◆ getDepth()

◆ getEndX()

◆ getEndY()

◆ getEndZ()

◆ getHeight()

◆ getStartX()

◆ getStartY()

◆ getStartZ()

◆ getWidth()

◆ intersect()

◆ isValid()

◆ moveEndX()

◆ moveEndY()

◆ moveEndZ()

◆ moveStartX()

◆ moveStartY()

◆ moveStartZ()

◆ operator!=()

◆ operator=()

◆ operator==()

◆ setArea()

◆ setDepth()

◆ setEndX()

◆ setEndY()

◆ setEndZ()

◆ setHeight()

◆ setStartX()

◆ setStartY()

◆ setStartZ()

◆ setWidth()

◆ setXDimension()

◆ setYDimension()

◆ setZDimension()