Isis Developer Reference
Isis::JigsawWorkOrder Class Reference

This work order allows the user to run a bundle adjustment (jigsaw). More...

#include <JigsawWorkOrder.h>

Inheritance diagram for Isis::JigsawWorkOrder:
Inheritance graph
Collaboration diagram for Isis::JigsawWorkOrder:
Collaboration graph

Public Types

enum  WorkOrderStatus {
  WorkOrderUnknownStatus = 0 , WorkOrderNotStarted , WorkOrderRedoing , WorkOrderRedone ,
  WorkOrderUndoing , WorkOrderUndone , WorkOrderFinished , WorkOrderLastStatus = WorkOrderFinished
}
 This enumeration is used by other functions to set and retrieve the current state of the WorkOrder. More...
 
enum  Context { NoContext , ProjectContext }
 This enumeration is for recording the context of the current Workorder (whether it is part of a project or not). More...
 

Public Slots

void enableWorkOrder ()
 Enables the work order.
 
void disableWorkOrder ()
 Disables the work order.
 
virtual bool setupExecution ()
 This sets up the state for the work order.
 
virtual void redo ()
 Starts (or enqueues) a redo.
 
virtual void undo ()
 Starts (or enqueues) an undo.
 

Signals

void creatingProgress (WorkOrder *)
 
void deletingProgress (WorkOrder *)
 
void finished (WorkOrder *)
 
void statusChanged (WorkOrder *)
 

Public Member Functions

 JigsawWorkOrder (Project *project)
 Constructs a JigsawWorkOrder.
 
 JigsawWorkOrder (const JigsawWorkOrder &other)
 Copy constructor.
 
 ~JigsawWorkOrder ()
 Destructor.
 
virtual JigsawWorkOrderclone () const
 This method clones the JigsawViewWorkOrder.
 
virtual bool isExecutable ()
 This method is no longer necessary and will remain commented out until it needs to be implemented.
 
virtual void execute ()
 Executes the work order by creating a jigsaw dialog that allows the user to run or re-setup the settings for a bundle adjustment.
 
virtual bool isExecutable (Context)
 Re-implement this method if your work order utilizes controls for data in order to operate.
 
virtual bool isExecutable (ImageList *images)
 Re-implement this method if your work order utilizes images for data in order to operate.
 
virtual bool isExecutable (ShapeList *shapes)
 Re-implement this method if your work order utilizes shapes for data in order to operate.
 
virtual bool isExecutable (ControlList *controls)
 Re-implement this method if your work order utilizes a control for data in order to operate.
 
virtual bool isExecutable (CorrelationMatrix)
 
virtual bool isExecutable (TargetBodyQsp targetBody)
 Re-implement this method if your work order utilizes a control list (a list of control networks) for data in order to operate.
 
virtual bool isExecutable (Template *currentTemplate)
 Re-implement this method if your work order utilizes a control list (a list of control networks) for data in order to operate.
 
virtual bool isExecutable (GuiCameraQsp guiCamera)
 Re-implement this method if your WorkOrder utilizes GuiCameraQsp (a QSharedPointer to a GuiCamera object) for data in order to operate.
 
virtual bool isExecutable (FileItemQsp fileItem)
 Re-implement this method if your WorkOrder utilizes FileItemQsp (a QSharedPointer to a FileItem object) for data in order to operate.
 
virtual bool isExecutable (ProjectItem *item)
 Determines if the WorkOrder is execuatable on the data stored in a ProjectItem.
 
void read (XmlStackedHandlerReader *xmlReader)
 Read this work order's data from disk.
 
void save (QXmlStreamWriter &stream) const
 : Saves a WorkOrder to a data stream.
 
virtual void setData (Context)
 Sets the context data for this WorkOrder.
 
virtual void setData (QString data)
 
virtual void setData (ImageList *images)
 Sets the ImageList data for this WorkOrder.
 
virtual void setData (ShapeList *shapes)
 Sets the ShapeList data for this WorkOrder.
 
virtual void setData (ControlList *controls)
 Sets the Control data for this WorkOrder.
 
virtual void setData (Template *currentTemplate)
 Sets the TargetBody data for this WorkOrder.
 
virtual void setData (CorrelationMatrix)
 Sets the CorrelationMatrix data for this WorkOrder.
 
virtual void setData (TargetBodyQsp targetBody)
 Sets the TargetBody data for this WorkOrder.
 
virtual void setData (GuiCameraQsp guiCamera)
 Sets the GuiCamera data for this WorkOrder.
 
virtual void setData (FileItemQsp fileItem)
 Sets the FileItem data for this WorkOrder.
 
virtual void setData (ProjectItem *item)
 Sets the internal data to the data stored in a ProjectItem.
 
void setNext (WorkOrder *nextWorkOrder)
 Sets the next WorkOrder in the sequence.
 
void setPrevious (WorkOrder *previousWorkOrder)
 Sets the previous WorkOrder in the sequence.
 
QString bestText () const
 Generate unique action names We don't use action text anymore because Directory likes to rename our actions.
 
bool isUndoable () const
 Returns true if this work order is undoable, otherwise false.
 
bool isSavedToHistory () const
 Returns true if this work order is to be shown in History, otherwise false.
 
bool isSynchronous () const
 Returns true if this work order is run synchronously, otherwise false.
 
bool createsCleanState () const
 Returns the CleanState status (whether the Project has been saved to disk or not).
 
QDateTime executionTime () const
 Gets the execution time of this WorkOrder.
 
bool isFinished () const
 Returns the finished state of this WorkOrder.
 
bool isRedoing () const
 Returns the redoing status of this WorkOrder.
 
bool isRedone () const
 Returns the WorkOrder redone status.
 
bool isUndoing () const
 Returns the WorkOrderUndoing state.
 
bool isUndone () const
 Returns the WorkOrder undo status.
 
bool modifiesDiskState () const
 Returns the modified disk state.
 
WorkOrdernext () const
 Gets the next WorkOrder.
 
WorkOrderprevious () const
 Gets the previous WorkOrder.
 
QString statusText () const
 WorkOrder::statusText.
 
ProgressBarprogressBar ()
 Returns the ProgressBar.
 

Static Public Member Functions

static WorkOrderStatus fromStatusString (QString)
 Attempts to query the current status of the WorkOrder.
 
static QString toString (WorkOrderStatus)
 Gets the current status of the WorkOrder.
 

Protected Slots

void addCloneToProject ()
 Runs a copy of the current WorkOrder and stores it in the project.
 

Protected Member Functions

bool dependsOn (WorkOrder *other) const
 This method returns true if other depends on a JigsawWorkOrder.
 
ImageListimageList ()
 Returns a pointer to the ImageList for this WorkOrder.
 
const ImageListimageList () const
 A thread-safe method for retrieving a pointer to the imageList.
 
ShapeListshapeList ()
 @briefReturns a pointer to the ShapeList for this WorkOrder.
 
const ShapeListshapeList () const
 A thread-safe method for retrieving a pointer to the shapeList.
 
CorrelationMatrix correlationMatrix ()
 Returns the CorrleationMatrix for this WorkOrder.
 
QPointer< ControlListcontrolList ()
 Returns the Control List for this WorkOrder (a list of control networks).
 
TemplategetTemplate ()
 WorkOrder::getTemplate.
 
TargetBodyQsp targetBody ()
 WorkOrder::targetBody.
 
GuiCameraQsp guiCamera ()
 WorkOrder::guiCamera.
 
FileItemQsp fileItem ()
 WorkOrder::fileItem.
 
Directorydirectory () const
 return the workorder project directory Returns the Directory object of the Project this WorkOrder is attached to.
 
Projectproject () const
 Returns the Project this WorkOrder is attached to.
 
void setCreatesCleanState (bool createsCleanState)
 Declare that this work order is saving the project.
 
void setModifiesDiskState (bool changesProjectOnDisk)
 
void setInternalData (QStringList data)
 Sets the internal data for this WorkOrder.
 
int progressMin () const
 Gets the minimum value of the progress range of the WorkOrder.
 
int progressMax () const
 Gets the maximum value of the progress range of the WorkOrder.
 
int progressValue () const
 Gets the current progress value of the WorkOrder.
 
void setProgressRange (int, int)
 Sets the progress range of the WorkOrder.
 
void setProgressValue (int)
 Sets the current progress value for the WorkOrder.
 
QStringList internalData () const
 Gets the internal data for this WorkOrder.
 
virtual void postExecution ()
 Perform any necessary actions after execution of a workorder.
 
virtual void undoExecution ()
 Execute the steps necessary to undo this workorder.
 
virtual void postUndoExecution ()
 Perform any steps necessary after an undo of a workorder.
 

Protected Attributes

bool m_isUndoable
 Set the workorder to be undoable/redoable This is defaulted to true - his will allow the workorder to be redone.
 
bool m_isSynchronous
 This is defaulted to true.
 
bool m_isSavedToHistory
 Set the work order to be shown in the HistoryTreeWidget.
 
WorkOrderStatus m_status
 

Detailed Description

This work order allows the user to run a bundle adjustment (jigsaw).

This workorder is synchronous and undoable.

Author
2014-04-03 Ken Edmundson

Member Enumeration Documentation

◆ Context

enum Isis::WorkOrder::Context
inherited

This enumeration is for recording the context of the current Workorder (whether it is part of a project or not).

Enumerator
NoContext 
ProjectContext 

◆ WorkOrderStatus

This enumeration is used by other functions to set and retrieve the current state of the WorkOrder.

Enumerator
WorkOrderUnknownStatus 
WorkOrderNotStarted 
WorkOrderRedoing 
WorkOrderRedone 
WorkOrderUndoing 
WorkOrderUndone 
WorkOrderFinished 

This is used for work orders that will not undo or redo (See createsCleanState())

WorkOrderLastStatus 

Constructor & Destructor Documentation

◆ JigsawWorkOrder() [1/2]

Isis::JigsawWorkOrder::JigsawWorkOrder ( Project * project)

Constructs a JigsawWorkOrder.

This creates a work order to run bundle adjustments. Note that right now, the design implemented means that this work order finishes after a JigsawRunWidget is shown. This work order is synchronous and not undoable. Note is is synchronous in that it simply displays a dialog. The actual bundle adjust is threaded.

See also
JigsawRunWidget
Parameters
projectThe Project that we are going to Bundle Adjust

References Isis::WorkOrder::m_isUndoable.

Referenced by clone().

◆ JigsawWorkOrder() [2/2]

Isis::JigsawWorkOrder::JigsawWorkOrder ( const JigsawWorkOrder & other)

Copy constructor.

Copies the state of another JigsawWorkOrder.

◆ ~JigsawWorkOrder()

Isis::JigsawWorkOrder::~JigsawWorkOrder ( )

Destructor.

Member Function Documentation

◆ addCloneToProject

void Isis::WorkOrder::addCloneToProject ( )
protectedslotinherited

Runs a copy of the current WorkOrder and stores it in the project.

References Isis::Project::addToProject(), Isis::WorkOrder::clone(), and Isis::WorkOrder::project().

Referenced by Isis::WorkOrder::WorkOrder(), and Isis::WorkOrder::WorkOrder().

◆ bestText()

QString Isis::WorkOrder::bestText ( ) const
inherited

Generate unique action names We don't use action text anymore because Directory likes to rename our actions.

It converts a set of actions that have the same text, like Zoom Fit, to be in a menu named Zoom Fit with items that name their widgets. Widget names are unhelpful as a description of the action.

See also
Directory::restructureActions
Returns
QString A textual description of the action.

Referenced by Isis::WorkOrder::save().

◆ clone()

JigsawWorkOrder * Isis::JigsawWorkOrder::clone ( ) const
virtual

This method clones the JigsawViewWorkOrder.

Returns
JigsawWorkOrder* Returns a clone of the JigsawWorkOrder

Implements Isis::WorkOrder.

References JigsawWorkOrder().

◆ controlList()

◆ correlationMatrix()

CorrelationMatrix Isis::WorkOrder::correlationMatrix ( )
protectedinherited

◆ createsCleanState()

bool Isis::WorkOrder::createsCleanState ( ) const
inherited

Returns the CleanState status (whether the Project has been saved to disk or not).

If this is set to true the work order will avoid being put on the undo stack, meaning it will not be undoable. It will also set the undo stack to a clean state, by doing this it makes all previous workorders done before the save to be no longer undoable.

Returns
Returns True if the Project has been saved to disk. False if it has not.

References Isis::WorkOrder::project().

Referenced by Isis::WorkOrder::setCreatesCleanState(), and Isis::WorkOrder::setupExecution().

◆ creatingProgress

void Isis::WorkOrder::creatingProgress ( WorkOrder * )
signalinherited

◆ deletingProgress

void Isis::WorkOrder::deletingProgress ( WorkOrder * )
signalinherited

◆ dependsOn()

bool Isis::JigsawWorkOrder::dependsOn ( WorkOrder * other) const
protectedvirtual

This method returns true if other depends on a JigsawWorkOrder.

Parameters
orderthe WorkOrder we want to check for dependancies
Returns
bool True if WorkOrder depends on a JigsawWorkOrder

Reimplemented from Isis::WorkOrder.

◆ directory()

Directory * Isis::WorkOrder::directory ( ) const
protectedinherited

◆ disableWorkOrder

void Isis::WorkOrder::disableWorkOrder ( )
slotinherited

Disables the work order.

Disables the work order so it cannot be triggered (grayed-out).

See also
Directory::initializeActions()

◆ enableWorkOrder

void Isis::WorkOrder::enableWorkOrder ( )
slotinherited

Enables the work order.

Enables the work order so that it can be triggered (clicked).

See also
Directory::initializeActions()

◆ execute()

void Isis::JigsawWorkOrder::execute ( )
virtual

Executes the work order by creating a jigsaw dialog that allows the user to run or re-setup the settings for a bundle adjustment.

See also
WorkOrder::execute()

Reimplemented from Isis::WorkOrder.

References _FILEINFO_, Isis::Directory::addJigsawRunWidget(), Isis::Project::directory(), Isis::IException::Programmer, and Isis::WorkOrder::project().

◆ executionTime()

QDateTime Isis::WorkOrder::executionTime ( ) const
inherited

Gets the execution time of this WorkOrder.

Returns
QDateTime The execution time.

References Isis::WorkOrder::project().

◆ fileItem()

FileItemQsp Isis::WorkOrder::fileItem ( )
protectedinherited

◆ finished

void Isis::WorkOrder::finished ( WorkOrder * )
signalinherited

◆ fromStatusString()

WorkOrder::WorkOrderStatus Isis::WorkOrder::fromStatusString ( QString statusString)
staticinherited

Attempts to query the current status of the WorkOrder.

Parameters
statusStringThe status we want information about.
Returns
WorkOrderStatus Returns WorkOrderUnknownStatus if the statusString does not match the current status. If there is a result, then it returns the status which matches the statusString.

References Isis::WorkOrder::toString(), Isis::WorkOrder::WorkOrderLastStatus, and Isis::WorkOrder::WorkOrderUnknownStatus.

◆ getTemplate()

Template * Isis::WorkOrder::getTemplate ( )
protectedinherited

◆ guiCamera()

◆ imageList() [1/2]

◆ imageList() [2/2]

const ImageList * Isis::WorkOrder::imageList ( ) const
protectedinherited

A thread-safe method for retrieving a pointer to the imageList.

Returns
(ImageList *) A pointer to the image list for this WorkOrder.

References Isis::WorkOrder::imageList().

◆ internalData()

QStringList Isis::WorkOrder::internalData ( ) const
protectedinherited

Gets the internal data for this WorkOrder.

Returns
QStringList Returns the internal data object.

References Isis::WorkOrder::project().

Referenced by Isis::CubeDnViewWorkOrder::execute(), Isis::ExportControlNetWorkOrder::execute(), Isis::ExportImagesWorkOrder::execute(), Isis::Footprint2DViewWorkOrder::execute(), Isis::ImageFileListViewWorkOrder::execute(), Isis::ImportControlNetWorkOrder::execute(), Isis::ImportImagesWorkOrder::execute(), Isis::ImportMapTemplateWorkOrder::execute(), Isis::ImportRegistrationTemplateWorkOrder::execute(), Isis::ImportShapesWorkOrder::execute(), Isis::RenameProjectWorkOrder::execute(), Isis::SaveProjectAsWorkOrder::execute(), Isis::ImageListActionWorkOrder::execute(), Isis::ImageListActionWorkOrder::ImageListActionWorkOrder(), Isis::RenameProjectWorkOrder::RenameProjectWorkOrder(), Isis::MosaicSceneWorkOrder::restoreZPositions(), Isis::MosaicSceneWorkOrder::scene(), Isis::ImageListActionWorkOrder::setData(), Isis::CubeDnViewWorkOrder::setupExecution(), Isis::ExportControlNetWorkOrder::setupExecution(), Isis::ExportImagesWorkOrder::setupExecution(), Isis::Footprint2DViewWorkOrder::setupExecution(), Isis::ImageFileListViewWorkOrder::setupExecution(), Isis::ImportControlNetWorkOrder::setupExecution(), Isis::MatrixViewWorkOrder::setupExecution(), Isis::RenameProjectWorkOrder::setupExecution(), Isis::SensorGetInfoWorkOrder::setupExecution(), Isis::TargetGetInfoWorkOrder::setupExecution(), Isis::TemplateEditViewWorkOrder::setupExecution(), Isis::ImageListActionWorkOrder::setupExecution(), Isis::MosaicSceneWorkOrder::storeZPositions(), Isis::MatrixViewWorkOrder::undoExecution(), Isis::RenameProjectWorkOrder::undoExecution(), and Isis::ImageListActionWorkOrder::undoExecution().

◆ isExecutable() [1/11]

bool Isis::JigsawWorkOrder::isExecutable ( )
virtual

This method is no longer necessary and will remain commented out until it needs to be implemented.

If WorkOrder:setupExecution() returns true, this creates a setup dialog.

When the setup is successful (i.e. the user does not cancel the dialog), this work order
will be read to execute.

Returns
bool Returns True if setup dialog for the bundle adjustment is successful.
This check is used by Directory::supportedActions(DataType data).
bool True if the number of project controls and the number of project images is greater than 0.

References Isis::WorkOrder::directory(), and Isis::WorkOrder::project().

◆ isExecutable() [2/11]

bool Isis::WorkOrder::isExecutable ( Context context)
virtualinherited

Re-implement this method if your work order utilizes controls for data in order to operate.

For example, "CnetEditorViewWorkOrder" works sometimes on controls

  • the logic in side of CnetEditorViewWorkOrder::isExecutable() determines whethere or not a user is prompted with this work order as a possibility.
    Parameters
    contextThis is an enum variable with two values: NoContext,ProjectContext.
    Returns
    bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

Reimplemented in Isis::RenameProjectWorkOrder.

Referenced by Isis::WorkOrder::isExecutable().

◆ isExecutable() [3/11]

bool Isis::WorkOrder::isExecutable ( ControlList * controls)
virtualinherited

Re-implement this method if your work order utilizes a control for data in order to operate.

Parameters
controlA control networks.
Returns
bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

Re-implement this method if your work order utilizes a control list (a list of control networks) for data in order to operate.

Parameters
controlsA list of control networks.
Returns
bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

Reimplemented in Isis::CnetEditorViewWorkOrder, Isis::ControlHealthMonitorWorkOrder, Isis::ExportControlNetWorkOrder, Isis::SetActiveControlWorkOrder, and Isis::ViewControlNet3DWorkOrder.

◆ isExecutable() [4/11]

bool Isis::WorkOrder::isExecutable ( CorrelationMatrix correlationMatrix)
virtualinherited

Reimplemented in Isis::MatrixViewWorkOrder.

◆ isExecutable() [5/11]

bool Isis::WorkOrder::isExecutable ( FileItemQsp fileItem)
virtualinherited

Re-implement this method if your WorkOrder utilizes FileItemQsp (a QSharedPointer to a FileItem object) for data in order to operate.

Parameters
FileItemQsp
Returns
bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

Reimplemented in Isis::BundleObservationViewWorkOrder.

◆ isExecutable() [6/11]

bool Isis::WorkOrder::isExecutable ( GuiCameraQsp guiCamera)
virtualinherited

Re-implement this method if your WorkOrder utilizes GuiCameraQsp (a QSharedPointer to a GuiCamera object) for data in order to operate.

Parameters
GuiCameraQsp
Returns
bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

Reimplemented in Isis::SensorGetInfoWorkOrder.

◆ isExecutable() [7/11]

bool Isis::WorkOrder::isExecutable ( ImageList * images)
virtualinherited

Re-implement this method if your work order utilizes images for data in order to operate.

For example, "Footprint2DViewWorkOrder" works sometimes on images - the logic in side of Footprint2DViewWorkOrder::isExecutable(ImageList) determines whethere or not a user is prompted with this work order as a possibility.

Parameters
imagesAn image list that this work order should execute on
Returns
bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

Reimplemented in Isis::SetActiveImageListWorkOrder, Isis::CubeDnViewWorkOrder, Isis::ExportImagesWorkOrder, Isis::Footprint2DViewWorkOrder, Isis::ImageFileListViewWorkOrder, Isis::RemoveImagesWorkOrder, and Isis::ImageListActionWorkOrder.

◆ isExecutable() [8/11]

◆ isExecutable() [9/11]

bool Isis::WorkOrder::isExecutable ( ShapeList * shapes)
virtualinherited

Re-implement this method if your work order utilizes shapes for data in order to operate.

For example, "ImportShapeWorkOrder" works on shapes - the logic in side of ImportShapeWorkOrder::isExecutable(ShapeList) determines whethere or not a user is prompted with this work order as a possibility.

Parameters
shapesA shape list that this work order should execute on
Returns
bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

Reimplemented in Isis::CubeDnViewWorkOrder, and Isis::Footprint2DViewWorkOrder.

◆ isExecutable() [10/11]

bool Isis::WorkOrder::isExecutable ( TargetBodyQsp targetBody)
virtualinherited

Re-implement this method if your work order utilizes a control list (a list of control networks) for data in order to operate.

Parameters
controlsA list of control networks.
Returns
bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

Reimplemented in Isis::TargetGetInfoWorkOrder.

◆ isExecutable() [11/11]

bool Isis::WorkOrder::isExecutable ( Template * currentTemplate)
virtualinherited

Re-implement this method if your work order utilizes a control list (a list of control networks) for data in order to operate.

Parameters
controlsA list of control networks.
Returns
bool Upon re-implementation, returns True if the WorkOrder is executable, and False if it is not.

◆ isFinished()

bool Isis::WorkOrder::isFinished ( ) const
inherited

Returns the finished state of this WorkOrder.

Returns
bool Returns True if the WorkOrder is finished, False otherwise.

References Isis::WorkOrder::m_status, and Isis::WorkOrder::WorkOrderFinished.

◆ isRedoing()

bool Isis::WorkOrder::isRedoing ( ) const
inherited

Returns the redoing status of this WorkOrder.

Returns
bool Returns True if the WorkOrder is executing a redo. Returns False if it is not.

References Isis::WorkOrder::m_status, Isis::WorkOrder::project(), and Isis::WorkOrder::WorkOrderRedoing.

Referenced by Isis::WorkOrder::redo(), and Isis::WorkOrder::undo().

◆ isRedone()

bool Isis::WorkOrder::isRedone ( ) const
inherited

Returns the WorkOrder redone status.

Returns
bool Returns True if the WorkOrder has completed a Redo. False if it has not.

References Isis::WorkOrder::m_status, Isis::WorkOrder::project(), and Isis::WorkOrder::WorkOrderRedone.

Referenced by Isis::WorkOrder::redo().

◆ isSavedToHistory()

bool Isis::WorkOrder::isSavedToHistory ( ) const
inherited

Returns true if this work order is to be shown in History, otherwise false.

Returns
(bool) Returns True if this work order is to be shown in History

References Isis::WorkOrder::m_isSavedToHistory, and Isis::WorkOrder::project().

◆ isSynchronous()

bool Isis::WorkOrder::isSynchronous ( ) const
inherited

Returns true if this work order is run synchronously, otherwise false.

Returns
(bool) Returns True if this work order is run synchronously

References Isis::WorkOrder::m_isSynchronous, and Isis::WorkOrder::project().

Referenced by Isis::WorkOrder::redo(), and Isis::WorkOrder::undo().

◆ isUndoable()

bool Isis::WorkOrder::isUndoable ( ) const
inherited

Returns true if this work order is undoable, otherwise false.

This needs to be set to true and createsCleanState needs to be set to false in order for a WorkOrder to appear on the undoStack. This should be done by setting the member variable and should not be overloading this function.

Returns
(bool) Returns True if this work order is undoable, false if it is not.

References Isis::WorkOrder::m_isUndoable, and Isis::WorkOrder::project().

Referenced by Isis::WorkOrder::setupExecution().

◆ isUndoing()

bool Isis::WorkOrder::isUndoing ( ) const
inherited

Returns the WorkOrderUndoing state.

Returns
bool Returns True if the current status is WorkOrderUndoing, False otherwise.

References Isis::WorkOrder::m_status, Isis::WorkOrder::project(), and Isis::WorkOrder::WorkOrderUndoing.

Referenced by Isis::WorkOrder::redo(), and Isis::WorkOrder::undo().

◆ isUndone()

bool Isis::WorkOrder::isUndone ( ) const
inherited

Returns the WorkOrder undo status.

Returns
bool Returns True if the WorkOrder has been undone. False if it has not.

References Isis::WorkOrder::m_status, Isis::WorkOrder::project(), and Isis::WorkOrder::WorkOrderUndone.

Referenced by Isis::WorkOrder::undo().

◆ modifiesDiskState()

bool Isis::WorkOrder::modifiesDiskState ( ) const
inherited

Returns the modified disk state.

Returns
Returns True if the WorkOrder has modified the Project on disk to perform it's actions. Returns False if it has not.

References Isis::WorkOrder::project().

◆ next()

WorkOrder * Isis::WorkOrder::next ( ) const
inherited

Gets the next WorkOrder.

Returns
QPointer pointing to the next WorkOrder.

References Isis::WorkOrder::project().

◆ postExecution()

void Isis::WorkOrder::postExecution ( )
protectedvirtualinherited

Perform any necessary actions after execution of a workorder.

State can be read from the parent WorkOrder class and from state set in either synchronous() or asyncRedo() while in this method. You can not set state to be used in any of the undo code safely. This method is always executed in the GUI thread and has no progress.

Reimplemented in Isis::ExportControlNetWorkOrder, Isis::ExportImagesWorkOrder, Isis::ImportControlNetWorkOrder, Isis::ImportImagesWorkOrder, and Isis::ImportShapesWorkOrder.

◆ postUndoExecution()

void Isis::WorkOrder::postUndoExecution ( )
protectedvirtualinherited

Perform any steps necessary after an undo of a workorder.

State can be read from the parent WorkOrder class and from state set undoExecution() while in this method. You can not set state to be used in any of the redo code safely. This method is always executed in the GUI thread and has no progress.

Reimplemented in Isis::ImportImagesWorkOrder, and Isis::ImportShapesWorkOrder.

◆ previous()

WorkOrder * Isis::WorkOrder::previous ( ) const
inherited

Gets the previous WorkOrder.

Returns
QPointer pointing to the previous WorkOrder.

References Isis::WorkOrder::project().

Referenced by Isis::Project::lastNotUndoneWorkOrder(), Isis::Project::lastNotUndoneWorkOrder(), and Isis::WorkOrder::redo().

◆ progressBar()

ProgressBar * Isis::WorkOrder::progressBar ( )
inherited

Returns the ProgressBar.

Returns
A QPointer to the ProgessBar.

References Isis::WorkOrder::project().

Referenced by Isis::OpenProjectWorkOrder::setupExecution().

◆ progressMax()

int Isis::WorkOrder::progressMax ( ) const
protectedinherited

Gets the maximum value of the progress range of the WorkOrder.

Returns
int The maximum value.

References Isis::WorkOrder::project().

◆ progressMin()

int Isis::WorkOrder::progressMin ( ) const
protectedinherited

Gets the minimum value of the progress range of the WorkOrder.

Returns
int The minimum value.

References Isis::WorkOrder::project().

◆ progressValue()

int Isis::WorkOrder::progressValue ( ) const
protectedinherited

Gets the current progress value of the WorkOrder.

Returns
int Returns the current progress value.

References Isis::WorkOrder::project().

◆ project()

Project * Isis::WorkOrder::project ( ) const
protectedinherited

Returns the Project this WorkOrder is attached to.

Returns
(Project *) A pointer to the Project.
Exceptions
IException::Programmer"This work order no longer has a project."

References _FILEINFO_, and Isis::IException::Programmer.

Referenced by Isis::WorkOrder::addCloneToProject(), Isis::WorkOrder::controlList(), Isis::WorkOrder::correlationMatrix(), Isis::WorkOrder::createsCleanState(), Isis::WorkOrder::directory(), Isis::BundleObservationViewWorkOrder::execute(), Isis::CloseProjectWorkOrder::execute(), Isis::CnetEditorViewWorkOrder::execute(), Isis::ControlHealthMonitorWorkOrder::execute(), Isis::CubeDnViewWorkOrder::execute(), Isis::ExportControlNetWorkOrder::execute(), Isis::ExportImagesWorkOrder::execute(), Isis::Footprint2DViewWorkOrder::execute(), Isis::ImageFileListViewWorkOrder::execute(), Isis::ImportControlNetWorkOrder::execute(), Isis::ImportImagesWorkOrder::execute(), Isis::ImportMapTemplateWorkOrder::execute(), Isis::ImportRegistrationTemplateWorkOrder::execute(), Isis::ImportShapesWorkOrder::execute(), execute(), Isis::MatrixViewWorkOrder::execute(), Isis::OpenProjectWorkOrder::execute(), Isis::RemoveImagesWorkOrder::execute(), Isis::RenameProjectWorkOrder::execute(), Isis::SaveProjectAsWorkOrder::execute(), Isis::SensorGetInfoWorkOrder::execute(), Isis::SetActiveControlWorkOrder::execute(), Isis::SetActiveImageListWorkOrder::execute(), Isis::TargetGetInfoWorkOrder::execute(), Isis::TemplateEditViewWorkOrder::execute(), Isis::WorkOrder::executionTime(), Isis::WorkOrder::fileItem(), Isis::WorkOrder::getTemplate(), Isis::WorkOrder::guiCamera(), Isis::WorkOrder::imageList(), Isis::WorkOrder::internalData(), isExecutable(), Isis::SetActiveControlWorkOrder::isExecutable(), Isis::SensorGetInfoWorkOrder::isExecutable(), Isis::SetActiveImageListWorkOrder::isExecutable(), Isis::TemplateEditViewWorkOrder::isExecutable(), Isis::TargetGetInfoWorkOrder::isExecutable(), Isis::WorkOrder::isRedoing(), Isis::WorkOrder::isRedone(), Isis::WorkOrder::isSavedToHistory(), Isis::WorkOrder::isSynchronous(), Isis::WorkOrder::isUndoable(), Isis::WorkOrder::isUndoing(), Isis::WorkOrder::isUndone(), Isis::WorkOrder::modifiesDiskState(), Isis::WorkOrder::next(), Isis::ExportControlNetWorkOrder::postExecution(), Isis::ExportImagesWorkOrder::postExecution(), Isis::ImportControlNetWorkOrder::postExecution(), Isis::ImportImagesWorkOrder::postExecution(), Isis::ImportShapesWorkOrder::postExecution(), Isis::ImportImagesWorkOrder::postUndoExecution(), Isis::ImportShapesWorkOrder::postUndoExecution(), Isis::WorkOrder::previous(), Isis::WorkOrder::progressBar(), Isis::WorkOrder::progressMax(), Isis::WorkOrder::progressMin(), Isis::WorkOrder::progressValue(), Isis::WorkOrder::redo(), Isis::RenameProjectWorkOrder::RenameProjectWorkOrder(), Isis::CloseProjectWorkOrder::setupExecution(), Isis::CubeDnViewWorkOrder::setupExecution(), Isis::ExportControlNetWorkOrder::setupExecution(), Isis::ExportImagesWorkOrder::setupExecution(), Isis::Footprint2DViewWorkOrder::setupExecution(), Isis::ImageFileListViewWorkOrder::setupExecution(), Isis::ImportImagesWorkOrder::setupExecution(), Isis::MatrixViewWorkOrder::setupExecution(), Isis::OpenProjectWorkOrder::setupExecution(), Isis::RemoveImagesWorkOrder::setupExecution(), Isis::RenameProjectWorkOrder::setupExecution(), Isis::SaveProjectWorkOrder::setupExecution(), Isis::SetActiveControlWorkOrder::setupExecution(), Isis::WorkOrder::shapeList(), Isis::WorkOrder::statusText(), Isis::WorkOrder::targetBody(), Isis::CnetEditorViewWorkOrder::undoExecution(), Isis::ImportImagesWorkOrder::undoExecution(), Isis::ImportMapTemplateWorkOrder::undoExecution(), Isis::ImportRegistrationTemplateWorkOrder::undoExecution(), Isis::ImportShapesWorkOrder::undoExecution(), Isis::MatrixViewWorkOrder::undoExecution(), Isis::RenameProjectWorkOrder::undoExecution(), and Isis::WorkOrder::WorkOrder().

◆ read()

void Isis::WorkOrder::read ( XmlStackedHandlerReader * xmlReader)
inherited

Read this work order's data from disk.

◆ redo

◆ save()

void Isis::WorkOrder::save ( QXmlStreamWriter & stream) const
inherited

: Saves a WorkOrder to a data stream.

The XML output format looks like this:

  <workOrder actionText="..." undoText="..." type="..." status="...">
    <images>
      <image id="..." >
    </images>

    <internalDataValues>
      <dataValue value="..." >
    </internalDataValues>
  </workOrder>
Parameters

b QXmlStreamWriter stream The data stream we are saving the WorkOrder to.

Exceptions
IException::UnknownThis exception is thrown if save is called while the WorkOrder is currently running.

References _FILEINFO_, Isis::WorkOrder::bestText(), Isis::WorkOrder::m_status, Isis::WorkOrder::NoContext, Isis::IException::Programmer, and Isis::WorkOrder::toString().

Referenced by Isis::CloseProjectWorkOrder::setupExecution(), and Isis::OpenProjectWorkOrder::setupExecution().

◆ setCreatesCleanState()

void Isis::WorkOrder::setCreatesCleanState ( bool createsCleanState)
protectedinherited

Declare that this work order is saving the project.

This makes the work order not appear in the undo stack (cannot undo/redo), and instead it is marked as a 'clean' state of the project. The QUndoCommand undo/redo will never be called. The default for createsCleanState is false. If this is set to true all wrokorders before this call will be locked.

Parameters
createsCleanStateTrue if this work order is going to save the project to disk, False otherwise.

References Isis::WorkOrder::createsCleanState().

Referenced by Isis::CloseProjectWorkOrder::CloseProjectWorkOrder(), Isis::OpenProjectWorkOrder::OpenProjectWorkOrder(), Isis::SaveProjectAsWorkOrder::SaveProjectAsWorkOrder(), and Isis::SaveProjectWorkOrder::SaveProjectWorkOrder().

◆ setData() [1/11]

void Isis::WorkOrder::setData ( Context context)
virtualinherited

Sets the context data for this WorkOrder.

Parameters
contextThis is an enum variable with two values: NoContext,ProjectContext.

Referenced by Isis::ImageListActionWorkOrder::setData(), Isis::WorkOrder::setData(), Isis::ExportControlNetWorkOrder::setupExecution(), and Isis::Directory::supportedActions().

◆ setData() [2/11]

void Isis::WorkOrder::setData ( ControlList * controls)
virtualinherited

Sets the Control data for this WorkOrder.

Parameters
controls.A pointer to the Control

Sets the ControlList data for this WorkOrder.

Parameters
controls.A pointer to the ControlList (which is a list of control networks).

◆ setData() [3/11]

void Isis::WorkOrder::setData ( CorrelationMatrix correlationMatrix)
virtualinherited

Sets the CorrelationMatrix data for this WorkOrder.

Parameters
correlationMatrixThe matrix data.

References Isis::WorkOrder::correlationMatrix().

◆ setData() [4/11]

void Isis::WorkOrder::setData ( FileItemQsp fileItem)
virtualinherited

Sets the FileItem data for this WorkOrder.

Parameters
FileItemA QSharedPointer to the FileItem.

References Isis::WorkOrder::fileItem().

◆ setData() [5/11]

void Isis::WorkOrder::setData ( GuiCameraQsp guiCamera)
virtualinherited

Sets the GuiCamera data for this WorkOrder.

Parameters
guiCameraA QSharedPointer to the GuiCamera.

References Isis::WorkOrder::guiCamera().

◆ setData() [6/11]

void Isis::WorkOrder::setData ( ImageList * images)
virtualinherited

Sets the ImageList data for this WorkOrder.

Parameters
imagesA pointer to the updated ImageList.

Reimplemented in Isis::ImageListActionWorkOrder.

◆ setData() [7/11]

◆ setData() [8/11]

void Isis::WorkOrder::setData ( QString data)
virtualinherited

◆ setData() [9/11]

void Isis::WorkOrder::setData ( ShapeList * shapes)
virtualinherited

Sets the ShapeList data for this WorkOrder.

Parameters
imagesA pointer to the updated ShapeList.

◆ setData() [10/11]

void Isis::WorkOrder::setData ( TargetBodyQsp targetBody)
virtualinherited

Sets the TargetBody data for this WorkOrder.

Parameters
targetBodyA QSharedPointer to the TargetBody.

References Isis::WorkOrder::targetBody().

◆ setData() [11/11]

void Isis::WorkOrder::setData ( Template * currentTemplate)
virtualinherited

Sets the TargetBody data for this WorkOrder.

Parameters
targetBodyA QSharedPointer to the TargetBody.

◆ setInternalData()

void Isis::WorkOrder::setInternalData ( QStringList data)
protectedinherited

Sets the internal data for this WorkOrder.

WorkOrders may not use member variables to store data. Any data needed for the workorder should be saved in to the base WorkOrder using setInternalData.

Parameters
dataThe data to set the internal data to.

Referenced by Isis::ImageListActionWorkOrder::execute(), Isis::ImageListActionWorkOrder::ImageListActionWorkOrder(), Isis::ImportMapTemplateWorkOrder::isExecutable(), Isis::ImportRegistrationTemplateWorkOrder::isExecutable(), Isis::MosaicSceneWorkOrder::MosaicSceneWorkOrder(), Isis::RenameProjectWorkOrder::RenameProjectWorkOrder(), Isis::CubeDnViewWorkOrder::setupExecution(), Isis::ExportControlNetWorkOrder::setupExecution(), Isis::ExportImagesWorkOrder::setupExecution(), Isis::Footprint2DViewWorkOrder::setupExecution(), Isis::ImageFileListViewWorkOrder::setupExecution(), Isis::ImportControlNetWorkOrder::setupExecution(), Isis::ImportImagesWorkOrder::setupExecution(), Isis::ImportMapTemplateWorkOrder::setupExecution(), Isis::ImportRegistrationTemplateWorkOrder::setupExecution(), Isis::ImportShapesWorkOrder::setupExecution(), Isis::MatrixViewWorkOrder::setupExecution(), Isis::RenameProjectWorkOrder::setupExecution(), Isis::SaveProjectAsWorkOrder::setupExecution(), Isis::SensorGetInfoWorkOrder::setupExecution(), Isis::TargetGetInfoWorkOrder::setupExecution(), Isis::TemplateEditViewWorkOrder::setupExecution(), Isis::ImageListActionWorkOrder::setupExecution(), Isis::MosaicSceneWorkOrder::storeZPositions(), and Isis::ImageListActionWorkOrder::undoExecution().

◆ setModifiesDiskState()

void Isis::WorkOrder::setModifiesDiskState ( bool changesProjectOnDisk)
protectedinherited

◆ setNext()

void Isis::WorkOrder::setNext ( WorkOrder * nextWorkOrder)
inherited

Sets the next WorkOrder in the sequence.

Parameters
nextWorkOrderThe next WorkOrder.

◆ setPrevious()

void Isis::WorkOrder::setPrevious ( WorkOrder * previousWorkOrder)
inherited

Sets the previous WorkOrder in the sequence.

Parameters
previousWorkOrderThe previous WorkOrder.

◆ setProgressRange()

void Isis::WorkOrder::setProgressRange ( int minValue,
int maxValue )
protectedinherited

Sets the progress range of the WorkOrder.

Parameters
minValueThe progress range minimum value.
maxValueThe progress range maximum value.

Referenced by Isis::ExportImagesWorkOrder::execute(), and Isis::ImportControlNetWorkOrder::execute().

◆ setProgressValue()

void Isis::WorkOrder::setProgressValue ( int value)
protectedinherited

Sets the current progress value for the WorkOrder.

Parameters
intvalue The value to set the current progress to.

Referenced by Isis::ExportImagesWorkOrder::execute(), and Isis::ImportControlNetWorkOrder::execute().

◆ setupExecution

bool Isis::WorkOrder::setupExecution ( )
virtualslotinherited

This sets up the state for the work order.

Child should implement this to get user input.

This method is designed to be implemented by children work orders, but they need to call the base class setupExecution (at the beginning).

State should only be set in the WorkOrder class in this method. You can set arbitrary state using setInternalData(). Call setData(ImageList), setInternalData(QStringList), etc... with all of the data/state necessary to perform the work order. This could be a list of file names, an ImageList of images you're viewing, or really anything else. This method is always executed in the GUI thread and is the only place to ask the user questions.

The actual work is done in execute(), using only state (data) stored in the WorkOrder class. You do not have to call execute() - this is done for you by WorkOrder::redo(). WorkOrder::redo() is called from Project::addToProject() when the workOrder is pushed onto the undo stack.

If this method returns false the workorder will be cancelled and will not be executed.

Returns
bool Returns True upon successful preparation of the WorkOrder, False if this operation should be cancelled (the user clicked cancel, the operation turns out to be impossible, etc). This prevents the work order from executing and it will not be entered into the history.

Reimplemented in Isis::BundleObservationViewWorkOrder, Isis::CloseProjectWorkOrder, Isis::CnetEditorViewWorkOrder, Isis::ControlHealthMonitorWorkOrder, Isis::CubeDnViewWorkOrder, Isis::ExportControlNetWorkOrder, Isis::ExportImagesWorkOrder, Isis::Footprint2DViewWorkOrder, Isis::ImageFileListViewWorkOrder, Isis::ImportControlNetWorkOrder, Isis::ImportImagesWorkOrder, Isis::ImportMapTemplateWorkOrder, Isis::ImportRegistrationTemplateWorkOrder, Isis::ImportShapesWorkOrder, Isis::MatrixViewWorkOrder, Isis::OpenProjectWorkOrder, Isis::RemoveImagesWorkOrder, Isis::RenameProjectWorkOrder, Isis::SaveProjectAsWorkOrder, Isis::SaveProjectWorkOrder, Isis::SensorGetInfoWorkOrder, Isis::SetActiveControlWorkOrder, Isis::SetActiveImageListWorkOrder, Isis::TargetGetInfoWorkOrder, Isis::TemplateEditViewWorkOrder, Isis::ViewControlNet3DWorkOrder, and Isis::ImageListActionWorkOrder.

References Isis::WorkOrder::createsCleanState(), Isis::WorkOrder::isUndoable(), Isis::WorkOrder::m_status, Isis::WorkOrder::statusChanged(), and Isis::WorkOrder::WorkOrderFinished.

Referenced by Isis::BundleObservationViewWorkOrder::setupExecution(), Isis::CloseProjectWorkOrder::setupExecution(), Isis::CnetEditorViewWorkOrder::setupExecution(), Isis::ControlHealthMonitorWorkOrder::setupExecution(), Isis::CubeDnViewWorkOrder::setupExecution(), Isis::ExportControlNetWorkOrder::setupExecution(), Isis::ExportImagesWorkOrder::setupExecution(), Isis::Footprint2DViewWorkOrder::setupExecution(), Isis::ImageFileListViewWorkOrder::setupExecution(), Isis::ImportControlNetWorkOrder::setupExecution(), Isis::ImportImagesWorkOrder::setupExecution(), Isis::ImportMapTemplateWorkOrder::setupExecution(), Isis::ImportRegistrationTemplateWorkOrder::setupExecution(), Isis::ImportShapesWorkOrder::setupExecution(), Isis::MatrixViewWorkOrder::setupExecution(), Isis::OpenProjectWorkOrder::setupExecution(), Isis::RemoveImagesWorkOrder::setupExecution(), Isis::RenameProjectWorkOrder::setupExecution(), Isis::SaveProjectAsWorkOrder::setupExecution(), Isis::SaveProjectWorkOrder::setupExecution(), Isis::SensorGetInfoWorkOrder::setupExecution(), Isis::SetActiveControlWorkOrder::setupExecution(), Isis::SetActiveImageListWorkOrder::setupExecution(), Isis::TargetGetInfoWorkOrder::setupExecution(), Isis::TemplateEditViewWorkOrder::setupExecution(), Isis::ViewControlNet3DWorkOrder::setupExecution(), and Isis::ImageListActionWorkOrder::setupExecution().

◆ shapeList() [1/2]

ShapeList * Isis::WorkOrder::shapeList ( )
protectedinherited

@briefReturns a pointer to the ShapeList for this WorkOrder.

Returns
(ShapeList*) A pointer to the ShapeList.

References Isis::WorkOrder::project(), and Isis::Project::shape().

Referenced by Isis::WorkOrder::isExecutable(), Isis::WorkOrder::redo(), Isis::WorkOrder::setData(), and Isis::WorkOrder::shapeList().

◆ shapeList() [2/2]

const ShapeList * Isis::WorkOrder::shapeList ( ) const
protectedinherited

A thread-safe method for retrieving a pointer to the shapeList.

Returns
(ShapeList *) A pointer to the shape list for this WorkOrder.

References Isis::WorkOrder::shapeList().

◆ statusChanged

void Isis::WorkOrder::statusChanged ( WorkOrder * )
signalinherited

◆ statusText()

QString Isis::WorkOrder::statusText ( ) const
inherited

WorkOrder::statusText.

Returns
QString A string representation of the current WorkOrder status.

References Isis::WorkOrder::m_status, Isis::WorkOrder::project(), and Isis::WorkOrder::toString().

◆ targetBody()

◆ toString()

QString Isis::WorkOrder::toString ( WorkOrderStatus status)
staticinherited

◆ undo

◆ undoExecution()

void Isis::WorkOrder::undoExecution ( )
protectedvirtualinherited

Execute the steps necessary to undo this workorder.

The workorder should have all state necessary to undo itself stored in the workorder.

For synchronous workorders: State should only be read from the parent WorkOrder class in this method. You can set state to be used in postUndoExecution() safely. This method is always executed in the GUI thread and has no progress.

For Asynchronous workorders: State can be read from the parent WorkOrder class while in this method. You can set state to be used in postSyncUndo() safely. Please be wary of deleting QObjects inside of this method because they will cause unpredictable crashes. This method is never executed in the GUI thread. You can update progress by calling setProgressRange() and setProgressValue(). Do not manipulate any GUI objects here.

Reimplemented in Isis::CnetEditorViewWorkOrder, Isis::ImportImagesWorkOrder, Isis::ImportMapTemplateWorkOrder, Isis::ImportRegistrationTemplateWorkOrder, Isis::ImportShapesWorkOrder, Isis::MatrixViewWorkOrder, Isis::RenameProjectWorkOrder, Isis::SensorGetInfoWorkOrder, Isis::ViewControlNet3DWorkOrder, Isis::ImageListActionWorkOrder, Isis::MoveDownOneSceneWorkOrder, Isis::MoveToBottomSceneWorkOrder, Isis::MoveToTopSceneWorkOrder, and Isis::MoveUpOneSceneWorkOrder.

Referenced by Isis::WorkOrder::undo().

Member Data Documentation

◆ m_isSavedToHistory

◆ m_isSynchronous

bool Isis::WorkOrder::m_isSynchronous
protectedinherited

This is defaulted to true.

If true, the work order will be executed on the GUI thread synchronously. If false, then the work order will be queued for execution on a non-GUI thread and will not block the GUI.

Referenced by Isis::ExportControlNetWorkOrder::ExportControlNetWorkOrder(), Isis::ExportImagesWorkOrder::ExportImagesWorkOrder(), Isis::ImportControlNetWorkOrder::ImportControlNetWorkOrder(), Isis::ImportImagesWorkOrder::ImportImagesWorkOrder(), Isis::ImportShapesWorkOrder::ImportShapesWorkOrder(), Isis::WorkOrder::isSynchronous(), Isis::WorkOrder::WorkOrder(), and Isis::WorkOrder::WorkOrder().

◆ m_isUndoable

bool Isis::WorkOrder::m_isUndoable
protectedinherited

Set the workorder to be undoable/redoable This is defaulted to true - his will allow the workorder to be redone.

Note the workorder undoExecution() method must be implemented. This will result on the workorder being placed on the QUndoStack and being displayed in the history as being undoable. If set to false, the work order will not be put on the QUndoStack and the workorder will not be able to be undone.

Referenced by Isis::BundleObservationViewWorkOrder::BundleObservationViewWorkOrder(), Isis::BundleObservationViewWorkOrder::BundleObservationViewWorkOrder(), Isis::CloseProjectWorkOrder::CloseProjectWorkOrder(), Isis::CnetEditorViewWorkOrder::CnetEditorViewWorkOrder(), Isis::ControlHealthMonitorWorkOrder::ControlHealthMonitorWorkOrder(), Isis::CubeDnViewWorkOrder::CubeDnViewWorkOrder(), Isis::ExportControlNetWorkOrder::ExportControlNetWorkOrder(), Isis::ExportImagesWorkOrder::ExportImagesWorkOrder(), Isis::Footprint2DViewWorkOrder::Footprint2DViewWorkOrder(), Isis::Footprint2DViewWorkOrder::Footprint2DViewWorkOrder(), Isis::ImageFileListViewWorkOrder::ImageFileListViewWorkOrder(), Isis::ImportControlNetWorkOrder::ImportControlNetWorkOrder(), Isis::ImportMapTemplateWorkOrder::ImportMapTemplateWorkOrder(), Isis::ImportRegistrationTemplateWorkOrder::ImportRegistrationTemplateWorkOrder(), Isis::ImportShapesWorkOrder::ImportShapesWorkOrder(), Isis::WorkOrder::isUndoable(), JigsawWorkOrder(), Isis::OpenProjectWorkOrder::OpenProjectWorkOrder(), Isis::RemoveImagesWorkOrder::RemoveImagesWorkOrder(), Isis::RemoveImagesWorkOrder::RemoveImagesWorkOrder(), Isis::RenameProjectWorkOrder::RenameProjectWorkOrder(), Isis::RenameProjectWorkOrder::RenameProjectWorkOrder(), Isis::RenameProjectWorkOrder::RenameProjectWorkOrder(), Isis::SaveProjectAsWorkOrder::SaveProjectAsWorkOrder(), Isis::SensorGetInfoWorkOrder::SensorGetInfoWorkOrder(), Isis::SetActiveControlWorkOrder::SetActiveControlWorkOrder(), Isis::SetActiveImageListWorkOrder::SetActiveImageListWorkOrder(), Isis::TargetGetInfoWorkOrder::TargetGetInfoWorkOrder(), Isis::TemplateEditViewWorkOrder::TemplateEditViewWorkOrder(), Isis::WorkOrder::WorkOrder(), and Isis::WorkOrder::WorkOrder().

◆ m_status


The documentation for this class was generated from the following files: