#include <Isotropic1.h>

Inheritance diagram for Isis::Isotropic1:

Collaboration diagram for Isis::Isotropic1:

Public Member Functions
	Isotropic1 (Pvl &pvl, PhotoModel &pmodel)

void	CalcAtmEffect (double pha, double inc, double ema, double pstd, double trans, double trans0, double sbar, double *transs)
	Calculate the atmospheric scattering effect using photometric angle information.

virtual void	SetStandardConditions (bool standard)
	Used to calculate atmosphere at standard conditions.

void	GenerateAhTable ()
	This method computes the values of the atmospheric Ah table and sets the properties of the atmospheric Ah spline.

void	GenerateHahgTables ()
	This method computes the values of the atmospheric Hahg and Hahg0 tables and sets the properties of the atmospheric Hahg and Hahg0 splines.

void	GenerateHahgTablesShadow ()
	This method is a modified version of the GenerateHahgTables method and is used solely for shadow modeling.

void	SetAtmosAtmSwitch (const int atmswitch)
	Set the switch that controls the function that will be integrated.

void	SetAtmosBha (const double bha)
	Set the Anisotropic Atmospheric function parameter.

void	SetAtmosHga (const double hga)
	Set the Hapke atmospheric function parameter.

void	SetAtmosInc (const double inc)
	Set the incidence angle.

void	SetAtmosNulneg (const string nulneg)
	Set the Atmospheric function parameter.

void	SetAtmosPhi (const double phi)
	Set the azimuth angle.

void	SetAtmosTau (const double tau)
	Set the Atmospheric function parameter.

void	SetAtmosTauref (const double tauref)
	Set the Atmospheric function parameter.

void	SetAtmosWha (const double wha)
	Set the Atmospheric function parameter.

void	SetAtmosHnorm (const double hnorm)
	Set the Atmospheric function parameter.

void	SetAtmosIord (const string offset)
	Set additive offset in fit.

void	SetAtmosEstTau (const string esttau)
	Estimate the optical depth tau using shadows.

string	AlgorithmName () const
	Return atmospheric algorithm name.

bool	AtmosAdditiveOffset () const
	Allow additive offset in fit?

double	AtmosHnorm () const
	Return atmospheric Hnorm value.

double	AtmosBha () const
	Return atmospheric Bha value.

double	AtmosTau () const
	Return atmospheric Tau value.

double	AtmosWha () const
	Return atmospheric Wha value.

double	AtmosHga () const
	Return atmospheric Hga value.

double	AtmosTauref () const
	Return atmospheric Tauref value.

bool	AtmosNulneg () const
	Return atmospheric Nulneg value.

double	AtmosAb () const
	Return atmospheric Ab value.

double	AtmosHahgsb () const
	Return atmospheric Hahgsb value.

int	AtmosNinc () const
	Return atmospheric Ninc value.

double	AtmosMunot () const
	Return atmospheric Munot value.

vector< double >	AtmosIncTable ()
	Return atmospheric IncTable value.

vector< double >	AtmosAhTable ()
	Return atmospheric AhTable value.

vector< double >	AtmosHahgtTable ()
	Return atmospheric HahgtTable value.

vector< double >	AtmosHahgt0Table ()
	Return atmospheric Hahgt0Table value.

NumericalApproximation	AtmosAhSpline ()
	If GenerateAhTable() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosAhTable) with first derivatives of the endpoints equal to 1.0e30.

NumericalApproximation	AtmosHahgtSpline ()
	If GenerateHahgTables() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosHahgtTable) with first derivatives of the endpoints equal to 1.0e30.

NumericalApproximation	AtmosHahgt0Spline ()
	If GenerateHahgTables() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosHahgt0Table) with first derivatives of the endpoints equal to 1.0e30.

Static Public Member Functions
static double	G11Prime (double tau)
	Perform Chandra and Van de Hulst's series approximation for the g'11 function needed in second order scattering theory.

static double	Ei (double x)
	This routine computes the exponential integral, Ei(x).

static double	En (unsigned int n, double x)
	This routine evaluates the generalized exponential integral, E_n(x).

Protected Member Functions
virtual void	AtmosModelAlgorithm (double phase, double incidence, double emission)
	Isotropic atmospheric scattering in the first approximation The model for scattering for a general, non-Lambertian surface with an atmosphere looks like this:

void	SetAtmosNulneg (bool nulneg)

void	SetAtmosIord (bool offset)

void	SetAtmosEstTau (bool esttau)

void	SetAlgorithmName (string name)

void	SetOldTau (double tau)

void	SetOldWha (double wha)

PhotoModel *	GetPhotoModel () const

bool	StandardConditions () const

bool	TauOrWhaChanged () const
	Checks whether tau or wha have changed.

double	Eulgam () const

Protected Attributes
int	p_atmosAtmSwitch

int	p_atmosNinc

double	p_atmosBha

double	p_atmosBhasave

double	p_atmosHgasave

double	p_atmosTauref

double	p_atmosTausave

double	p_atmosWhasave

double	p_pstd
	Pure atmospheric-scattering term.

double	p_trans
	Transmission of surface reflected light through the atmosphere overall.

double	p_trans0
	Transmission of surface reflected light through the atmosphere with no scatterings in the atmosphere.

double	p_transs
	Transmission of light that must be subtracted from the flat surface model to get the shadow model.

double	p_sbar
	Illumination of the ground by the sky.

double	p_atmosHga

double	p_atmosTau

double	p_atmosWha

double	p_atmosAb

double	p_atmosHnorm
	Atmospheric shell thickness normalized to planet radius.

bool	p_atmosAddOffset
	Allow additive offset in fit.

bool	p_atmosEstTau
	Estimate optical depth tau using shadows.

vector< double >	p_atmosIncTable

vector< double >	p_atmosAhTable

double	p_atmosHahgsb

vector< double >	p_atmosHahgtTable

vector< double >	p_atmosHahgt0Table

double	p_atmosInc

double	p_atmosPhi

double	p_atmosMunot

double	p_atmosSini

double	p_atmosCosphi

double	p_atmosEulgam

NumericalApproximation	p_atmosAhSpline
	Spline object for the atmospheric Ah Table. Properties are set in GenerateAhTable().

NumericalApproximation	p_atmosHahgtSpline
	Spline object for the atmospheric Hahg Table. Properties are set in GenerateHahgTables().

NumericalApproximation	p_atmosHahgt0Spline
	Spline object for the atmospheric Hahg0 Table. Properties are set in GenerateHahgTables().

Private Attributes
double	p_wha2

double	p_delta

double	p_fixcon

double	p_gammax

double	p_gammay

double	p_e2

double	p_e3

double	p_e4

double	p_e5

double	p_x0

double	p_y0

double	p_alpha0

double	p_alpha1

double	p_alpha2

double	p_beta0

double	p_beta1

double	p_beta2

bool	p_standardConditions

string	p_atmosAlgorithmName

PhotoModel *	p_atmosPM

bool	p_atmosNulneg

double	p_atmosTauold

double	p_atmosWhaold

Detailed Description

Author: 1998-12-21 Randy Kirk

History

1998-12-21 Randy Kirk - USGS, Flagstaff - Original code

2007-02-20 Janet Barrett - Imported from Isis2.

2007-08-15 Steven Lambright - Refactored code

2008-03-07 Janet Barrett - Moved code to set standard conditions to the AtmosModel class

2008-06-18 Stuart Sides - Fixed doc error

2008-11-05 Jeannie Walldren - Replaced reference to NumericalMethods::r8expint() with AtmosModel::En(). Added documentation from Isis2.

2011-08-18 Sharmila Prasad Moved common HNORM to base AtmosModel

2011-12-19 Janet Barrett - Added code to estimate the shadow brightness value (transs). Also got rid of unnecessary check for identical photometric angle values between successive calls. This check should only be made in the photometric models.

Definition at line 39 of file Isotropic1.h.

Constructor & Destructor Documentation

◆ Isotropic1()

Isis::Isotropic1::Isotropic1	(	Pvl &	pvl,
		PhotoModel &	pmodel )

Definition at line 19 of file Isotropic1.cpp.

◆ ~Isotropic1()

virtual Isis::Isotropic1::~Isotropic1 ( )

inlinevirtual

Definition at line 42 of file Isotropic1.h.

Member Function Documentation

◆ AlgorithmName()

string Isis::AtmosModel::AlgorithmName ( ) const

inlineinherited

Return atmospheric algorithm name.

Definition at line 100 of file AtmosModel.h.

◆ AtmosAb()

double Isis::AtmosModel::AtmosAb ( ) const

inlineinherited

Return atmospheric Ab value.

Definition at line 139 of file AtmosModel.h.

Referenced by Isis::AlbedoAtm::NormModelAlgorithm().

◆ AtmosAdditiveOffset()

bool Isis::AtmosModel::AtmosAdditiveOffset ( ) const

inlineinherited

Allow additive offset in fit?

Definition at line 105 of file AtmosModel.h.

References Isis::AtmosModel::p_atmosAddOffset.

◆ AtmosAhSpline()

NumericalApproximation Isis::AtmosModel::AtmosAhSpline ( )

inlineinherited

If GenerateAhTable() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosAhTable) with first derivatives of the endpoints equal to 1.0e30.

Otherwise, it is a natural cubic spline with an empty data set.

Returns: NumericalApproximation Cubic spline

History: 2008-11-05 Jeannie Walldren - Original version

Definition at line 183 of file AtmosModel.h.

References Isis::AtmosModel::p_atmosAhSpline.

Referenced by Isis::AlbedoAtm::AlbedoAtm(), and Isis::AlbedoAtm::NormModelAlgorithm().

◆ AtmosAhTable()

vector< double > Isis::AtmosModel::AtmosAhTable ( )

inlineinherited

Return atmospheric AhTable value.

Definition at line 160 of file AtmosModel.h.

◆ AtmosBha()

double Isis::AtmosModel::AtmosBha ( ) const

inlineinherited

Return atmospheric Bha value.

Definition at line 115 of file AtmosModel.h.

◆ AtmosHahgsb()

double Isis::AtmosModel::AtmosHahgsb ( ) const

inlineinherited

Return atmospheric Hahgsb value.

Definition at line 143 of file AtmosModel.h.

◆ AtmosHahgt0Spline()

NumericalApproximation Isis::AtmosModel::AtmosHahgt0Spline ( )

inlineinherited

If GenerateHahgTables() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosHahgt0Table) with first derivatives of the endpoints equal to 1.0e30.

Otherwise, it is a natural cubic spline with an empty data set.

Returns: NumericalApproximation Cubic spline

History: 2008-11-05 Jeannie Walldren - Original version

Definition at line 211 of file AtmosModel.h.

References Isis::AtmosModel::p_atmosHahgt0Spline.

◆ AtmosHahgt0Table()

vector< double > Isis::AtmosModel::AtmosHahgt0Table ( )

inlineinherited

Return atmospheric Hahgt0Table value.

Definition at line 168 of file AtmosModel.h.

◆ AtmosHahgtSpline()

NumericalApproximation Isis::AtmosModel::AtmosHahgtSpline ( )

inlineinherited

If GenerateHahgTables() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosHahgtTable) with first derivatives of the endpoints equal to 1.0e30.

Otherwise, it is a natural cubic spline with an empty data set.

Returns: NumericalApproximation Cubic spline

History: 2008-11-05 Jeannie Walldren - Original version

Definition at line 197 of file AtmosModel.h.

References Isis::AtmosModel::p_atmosHahgtSpline.

◆ AtmosHahgtTable()

vector< double > Isis::AtmosModel::AtmosHahgtTable ( )

inlineinherited

Return atmospheric HahgtTable value.

Definition at line 164 of file AtmosModel.h.

◆ AtmosHga()

double Isis::AtmosModel::AtmosHga ( ) const

inlineinherited

Return atmospheric Hga value.

Definition at line 127 of file AtmosModel.h.

◆ AtmosHnorm()

double Isis::AtmosModel::AtmosHnorm ( ) const

inlineinherited

Return atmospheric Hnorm value.

Definition at line 110 of file AtmosModel.h.

References Isis::AtmosModel::p_atmosHnorm.

◆ AtmosIncTable()

vector< double > Isis::AtmosModel::AtmosIncTable ( )

inlineinherited

Return atmospheric IncTable value.

Definition at line 156 of file AtmosModel.h.

◆ AtmosModelAlgorithm()

void Isis::Isotropic1::AtmosModelAlgorithm	(	double	phase,
		double	incidence,
		double	emission )

protectedvirtual

Isotropic atmospheric scattering in the first approximation The model for scattering for a general, non-Lambertian surface with an atmosphere looks like this:

P = Pstd + trans*(rho*Ah*munot)/(1.d0-rho*Ab*sbar) trans0*rho*(Psurf-Ah*munot)

where P is the overall photometric function (the model of the data), PSTD is the pure atmospheric-scattering term, PSURF is the surface photometric function, AH*MUNOT is a Lambertian approximation to this with hemispheric albedo AH, TRANS and TRANS0 quantify transmission of surface reflected light through the atmosphere overall and with no scatterings in the atmosphere, and finally SBAR quantifies the illumination of the ground by the sky. RHO is the ratio of the sur- face albedo to the albedo assumed in the functional form of PSURF.

Parameters

phase	Value of the phase angle.
incidence	Value of the incidence angle.
emission	Value of the emission angle.

History

1998-12-21 Randy Kirk - USGS, Flagstaff - Original code

1999-03-12 K Teal Thompson Port to Unix/ISIS; declare vars; add implicit none.

2007-02-20 Janet Barrett - Imported from Isis2 pht_atm_functions to Isis3.

2008-11-05 Jeannie Walldren - Replaced NumericalMethods::r8expint() with AtmosModel::En(). Replaced Isis::PI with PI since this is in Isis namespace.

2011-12-19 Janet Barrett - Added code to estimate the shadow brightness value (transs). Also got rid of unnecessary check for identical photometric angle values between successive calls. This check should only be made in the photometric models.

Implements Isis::AtmosModel.

Definition at line 59 of file Isotropic1.cpp.

References Isis::PI.

◆ AtmosMunot()

double Isis::AtmosModel::AtmosMunot ( ) const

inlineinherited

Return atmospheric Munot value.

Definition at line 151 of file AtmosModel.h.

◆ AtmosNinc()

int Isis::AtmosModel::AtmosNinc ( ) const

inlineinherited

Return atmospheric Ninc value.

Definition at line 147 of file AtmosModel.h.

◆ AtmosNulneg()

bool Isis::AtmosModel::AtmosNulneg ( ) const

inlineinherited

Return atmospheric Nulneg value.

Definition at line 135 of file AtmosModel.h.

◆ AtmosTau()

double Isis::AtmosModel::AtmosTau ( ) const

inlineinherited

Return atmospheric Tau value.

Definition at line 119 of file AtmosModel.h.

Referenced by Isis::AtmosModel::TauOrWhaChanged().

◆ AtmosTauref()

double Isis::AtmosModel::AtmosTauref ( ) const

inlineinherited

Return atmospheric Tauref value.

Definition at line 131 of file AtmosModel.h.

◆ AtmosWha()

double Isis::AtmosModel::AtmosWha ( ) const

inlineinherited

Return atmospheric Wha value.

Definition at line 123 of file AtmosModel.h.

Referenced by Isis::AtmosModel::GenerateHahgTables(), Isis::AtmosModel::GenerateHahgTablesShadow(), and Isis::AtmosModel::TauOrWhaChanged().

◆ CalcAtmEffect()

void Isis::AtmosModel::CalcAtmEffect	(	double	pha,
		double	inc,
		double	ema,
		double *	pstd,
		double *	trans,
		double *	trans0,
		double *	sbar,
		double *	transs )

inherited

Calculate the atmospheric scattering effect using photometric angle information.

Parameters

pha	phase angle
inc	incidence angle
ema	emission angle
pstd	pure atmospheric-scattering term
trans	transmission of surface reflected light through the atmosphere overall
trans0	transmission of surface reflected light through the atmosphere with no scatterings in the atmosphere
sbar	illumination of the ground by the sky

Exceptions

Isis::IException::User "Invalid photometric angles"

Definition at line 475 of file AtmosModel.cpp.

References Isis::AtmosModel::p_pstd, Isis::AtmosModel::p_sbar, Isis::AtmosModel::p_trans, Isis::AtmosModel::p_trans0, and Isis::AtmosModel::p_transs.

Referenced by Isis::AlbedoAtm::AlbedoAtm(), and Isis::AlbedoAtm::NormModelAlgorithm().

◆ Ei()

double Isis::AtmosModel::Ei ( double x )

staticinherited

This routine computes the exponential integral, Ei(x).

This is defined as

\[ Ei(x) = - \int_{-x}^{\infty} \frac{e^{-t}}{t}\mathrm{d}t = \int_{-\infty}^{x} \frac{e^{t}}{t}\mathrm{d}t \]

for x > 0.

For small x, this method uses the power series,

\[ Ei(x) = \gamma + \ln x + \frac{x}{1*1!} + \frac{x^2}{2*2!} + ... \]

where \( \gamma = 0.5772156649... \) is Euler's constant, and for large x, the asymptotic series is used,

\[ Ei(x) \sim \frac{e^x}{x} (1 + \frac{1!}{x} + \frac{2!}{x^2} + ...) \]

See also: mathworld.wolfram.com/ExponentialIntegral.html

Parameters

x	Value at which the exponential integral will be computed, x > 0.0

Returns: double The exponential integral for the given x.

Exceptions

Isis::IException::Programmer	"Invalid arguments. Definition requires x > 0.0."
Isis::IException::Math	"Power series failed to converge"

History

1999-08-11 K Teal Thompson - Original version named pht_r8ei in Isis2.

2007-02-20 Janet Barrett - Imported to Isis3 in NumericalMethods class named r8ei().

2008-11-05 Jeannie Walldren - Renamed and modified input parameters. Added documentation.

Definition at line 229 of file AtmosModel.cpp.

References Isis::IException::Programmer, and Isis::IException::Unknown.

Referenced by Isis::Anisotropic2::AtmosModelAlgorithm().

◆ En()

double Isis::AtmosModel::En	(	unsigned int	n,
		double	x )

staticinherited

This routine evaluates the generalized exponential integral, E_n(x).

This is defined as

\[ E_n(x) = \int_{1}^{\infty} \frac{e^{-xt}}{t^n}\mathrm{d}t \mathrm{ for } x \in \mathbb{R }, n \in \mathbb{Z } \mathrm{such that } x \ge 0.0, n \ge 0 \]

Notice that if x = 0, then the equation is not defined for n = 0 or n = 1, as these will result in \( E_n(x) = \infty \).

This method uses the following for cases:

For n > 1 and x = 0.0,
\[ E_n(0) = \frac{1}{n-1} \]
For n = 0 and x > 0.0,
\[ E_0(x) = \frac{e^{-x}}{x} \]
For \( x >\sim 1.0 \), Lentz's continued fraction algorithm is used,
\[ E_n(x) = e^{-x}(\frac{1}{x + n - \frac{1*n}{x + n + 2 - \frac{2(n+1)}{x + n + 4 - ...}}}) \]
For \( 0.0 < x <\sim 1.0 \), series representation is used,
\[ E_n(x) = \frac{(-x)^{n-1}}{(n-1)!}[- \ln x + \psi (n)] - \sum_{m=0, m \neq n-1}^{\infty}\frac{(-x)^m}{(m-n+1)m!} \]
where \( \psi (1) = \gamma \) and \( \psi (n) = - \gamma + \sum_{m=1}^{n-1} \frac{1}{m}\) and \( \gamma = 0.5772156649... \) is Euler's constant.

The parameter n is of type unsigned int since n cannot be negative.

The routine allows fast evaluation of E_n(x) to any accuracy, \(\epsilon\), within the reach of your machine's word length for floating-point numbers. The only modification required for increased accuracy is to supply Euler's constant with enough significant digits.

See also: mathworld.wolfram.com/En-Function.html

Parameters

n	Integer value at which the exponential integral will be evaluated (n >= 0)
x	The exponential integral En(x) will be evaluated

Returns: double Value of the exponential integral for the give n and x.

Exceptions

Isis::IException::Programmer	"Invalid arguments. Definition requires (x > 0.0 and n >=0 ) or (x >= 0.0 and n > 1)."
Isis::IException::Math	"Continued fraction failed to converge"
Isis::IException::Math	"Series representation failed to converge"

History

1999-08-10 K Teal Thompson - Original version in named pht_r8expint Isis2.

2007-02-20 Janet Barrett - Imported to Isis3 in NumericalMethods class named r8expint().

2008-11-05 Jeannie Walldren - Renamed and modified input parameters. Added documentation.

Definition at line 370 of file AtmosModel.cpp.

References Isis::IException::Programmer, and Isis::IException::Unknown.

Referenced by Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), and Isis::AtmosModel::G11Prime().

◆ Eulgam()

double Isis::AtmosModel::Eulgam ( ) const

inlineprotectedinherited

Definition at line 244 of file AtmosModel.h.

◆ G11Prime()

double Isis::AtmosModel::G11Prime ( double tau )

staticinherited

Perform Chandra and Van de Hulst's series approximation for the g'11 function needed in second order scattering theory.

Parameters

tau	normal optical depth of atmosphere

Returns: double Value of the g'11 function evaluated at the given tau

History

1998-12-21 Randy Kirk, USGS - Flagstaff - Original code in Isis2 pht_am_functions

1999-03-12 K Teal Thompson - Port to Unix/ISIS; declare vars; cadd implicit none.

2007-02-20 Janet Barrett - Imported from Isis2 to Isis3 in NumericalMethods class.

2008-11-05 Jeannie Walldren - Moved this method from NumericalMethods class.

Definition at line 153 of file AtmosModel.cpp.

References Isis::AtmosModel::En(), and Isis::PI.

Referenced by Isis::Anisotropic2::AtmosModelAlgorithm().

◆ GenerateAhTable()

void Isis::AtmosModel::GenerateAhTable ( )

inherited

This method computes the values of the atmospheric Ah table and sets the properties of the atmospheric Ah spline.

It obtains the hemispheric albedo by integrating the photometric function times mu over mu = 0 to 1 and then over phi = 0 to 2*pi to calculate the hemispheric reflectance Ah needed for the photometric model with atmosphere. The Trapezoid rule is applied to the table of Ah to obtain bihemispheric albedo Ab. The parameter p_atmosAtmSwitch is set to 0 to integrate Ah.

History

1998-12-21 Randy Kirk - USGS, Flagstaff - Original specs

1999-01-15 K Teal Thompson - Original code

2000-12-29 Randy Kirk - Modified /hide_inc/ so phi gets passed, etc. moved factors to outside integration

2006-05-30 Randy Kirk - Added code to report the directional hemispheric albedo that relates to thermal balance for simulating Themis images

2007-02-20 Janet Barrett - Imported to Isis3 from Isis2 pht_get_ah_table

2008-11-05 Jeannie Walldren - Modified references to NumericalMethods and replaced r8qromb() with NumericalAtmosApprox::RombergsMethod(). Changed name from PhtGetAhTable().

Definition at line 537 of file AtmosModel.cpp.

References Isis::NumericalApproximation::AddData(), Isis::PhotoModel::AlgorithmName(), Isis::NumericalApproximation::CubicClamped, Isis::NumericalAtmosApprox::OuterFunction, Isis::AtmosModel::p_atmosAhSpline, Isis::PI, Isis::NumericalApproximation::Reset(), Isis::NumericalApproximation::SetCubicClampedEndptDeriv(), and Isis::NumericalApproximation::SetInterpType().

Referenced by Isis::AlbedoAtm::AlbedoAtm().

◆ GenerateHahgTables()

void Isis::AtmosModel::GenerateHahgTables ( )

inherited

This method computes the values of the atmospheric Hahg and Hahg0 tables and sets the properties of the atmospheric Hahg and Hahg0 splines.

It integrates functions involving the single particle phase function (assumed to be Hapke Henyey-Greenstein) over mu = 0 to 1 and then over phi = 0 to 2*pi to calculate the corrections needed for the anisotropic photometric model with atmosphere. The Trapezoid rule is applied to the table of Ah to obtain bihemispheric albedo Ab. The parameter p_atmosAtmSwitch is set to 1, 2, 3 to evaluate the 3 required integrals.

History

1998-12-21 Randy Kirk - USGS, Flagstaff - Original specs

1999-01-15 K Teal Thompson - Original code

2006-07-07 Randy Kirk - Modify get_ah_table to get other integrals

2000-12-29 Randy Kirk - Modified /hide_inc/ so phi gets passed, etc. moved factors to outside integration

2007-02-20 Janet Barrett - Imported to Isis3 from Isis2 pht_get_ah_table

2008-11-05 Jeannie Walldren - Modified references to NumericalMethods and replaced r8qromb() with NumericalAtmosApprox::RombergsMethod(). Changed name from GetHahgTables().

Definition at line 637 of file AtmosModel.cpp.

References Isis::NumericalApproximation::AddData(), Isis::AtmosModel::AtmosWha(), Isis::NumericalApproximation::CubicClamped, Isis::NumericalAtmosApprox::OuterFunction, Isis::AtmosModel::p_atmosHahgt0Spline, Isis::AtmosModel::p_atmosHahgtSpline, Isis::PI, Isis::NumericalApproximation::Reset(), Isis::NumericalApproximation::SetCubicClampedEndptDeriv(), and Isis::NumericalApproximation::SetInterpType().

◆ GenerateHahgTablesShadow()

void Isis::AtmosModel::GenerateHahgTablesShadow ( )

inherited

This method is a modified version of the GenerateHahgTables method and is used solely for shadow modeling.

Unlike the GenerateHahgTables method, this method does not tabulate the first or third integrals. It only evaluates the middle integral that corrects the sbar variable (illumination of the ground by the sky).

History

1998-12-21 Randy Kirk - USGS, Flagstaff - Original specs

1999-01-15 K Teal Thompson - Original code

2006-07-07 Randy Kirk - Modify get_ah_table to get other integrals

2000-09-15 Randy Kirk - Delete first, last integrals and table of second integral

2000-12-29 Randy Kirk - Modified /hide_inc/ so phi gets passed, etc. moved factors to outside integration

2011-12-16 Janet Barrett - Imported to Isis3 from Isis2 get_hahgsb_shad routine in the not_shadow_tau set of routines

Definition at line 726 of file AtmosModel.cpp.

References Isis::AtmosModel::AtmosWha(), Isis::NumericalAtmosApprox::OuterFunction, and Isis::PI.

◆ GetPhotoModel()

PhotoModel * Isis::AtmosModel::GetPhotoModel ( ) const

inlineprotectedinherited

Definition at line 237 of file AtmosModel.h.

◆ SetAlgorithmName()

void Isis::AtmosModel::SetAlgorithmName ( string name )

inlineprotectedinherited

Definition at line 218 of file AtmosModel.h.

◆ SetAtmosAtmSwitch()

void Isis::AtmosModel::SetAtmosAtmSwitch ( const int atmswitch )

inherited

Set the switch that controls the function that will be integrated.

This method is only used for testing the methods in this class. This parameter is limited to the values 0, 1, 2, and 3.

Parameters

atmswitch Internal atmospheric function parameter, there is no default

Exceptions

Isis::IException::User "Invalid value of atmospheric atmswitch"

Definition at line 779 of file AtmosModel.cpp.

References Isis::IException::User.

◆ SetAtmosBha()

void Isis::AtmosModel::SetAtmosBha ( const double bha )

inherited

Set the Anisotropic Atmospheric function parameter.

This is the coefficient of the single particle Legendre phase function. This parameter is limited to values that are >=-1 and <=1.

Parameters

bha	Anisotropic atmospheric function parameter, default is 0.85

Exceptions

Isis::IException::User "Invalid value of atmospheric bha"

Definition at line 799 of file AtmosModel.cpp.

References Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosEstTau() [1/2]

void Isis::AtmosModel::SetAtmosEstTau ( bool esttau )

inlineprotectedinherited

Definition at line 227 of file AtmosModel.h.

◆ SetAtmosEstTau() [2/2]

void Isis::AtmosModel::SetAtmosEstTau ( const string esttau )

inherited

Estimate the optical depth tau using shadows.

Author: Janet Barrett (12/16/2011)

Parameters

esttau true/false

Definition at line 1002 of file AtmosModel.cpp.

References Isis::AtmosModel::SetAtmosEstTau(), and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosEstTau().

◆ SetAtmosHga()

void Isis::AtmosModel::SetAtmosHga ( const double hga )

inherited

Set the Hapke atmospheric function parameter.

This is the coefficient of the single particle Henyey-Greenstein phase function. This parameter is limited to values that are >-1 and <1.

Parameters

hga	Hapke atmospheric function parameter, default is 0.68

Exceptions

Isis::IException::User "Invalid value of atmospheric hga"

Definition at line 820 of file AtmosModel.cpp.

References Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosHnorm()

void Isis::AtmosModel::SetAtmosHnorm ( const double hnorm )

inherited

Set the Atmospheric function parameter.

This is the atmospheric shell thickness normalized to the planet radius and is used to modify angles to get more accurate path lengths near the terminator (ratio of scale height to the planetary radius). This parameter is limited to values that are >=0.

Parameters

hnorm Atmospheric function parameter, default is 0.003

Definition at line 968 of file AtmosModel.cpp.

References Isis::AtmosModel::p_atmosHnorm, Isis::toString(), and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosInc()

void Isis::AtmosModel::SetAtmosInc ( const double inc )

inherited

Set the incidence angle.

This method is only used for testing the methods in this class. This parameter is limited to values >=0 and <=90.

Parameters

inc	Internal atmospheric function parameter, there is no default

Exceptions

Isis::IException::User "Invalid value of atmospheric inc"

Definition at line 839 of file AtmosModel.cpp.

References Isis::PI, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosIord() [1/2]

void Isis::AtmosModel::SetAtmosIord ( bool offset )

inlineprotectedinherited

Definition at line 224 of file AtmosModel.h.

◆ SetAtmosIord() [2/2]

void Isis::AtmosModel::SetAtmosIord ( const string offset )

inherited

Set additive offset in fit.

Author: Sharmila Prasad (8/18/2011)

Parameters

offset true/false

Definition at line 983 of file AtmosModel.cpp.

References Isis::AtmosModel::SetAtmosIord(), and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosIord().

◆ SetAtmosNulneg() [1/2]

void Isis::AtmosModel::SetAtmosNulneg ( bool nulneg )

inlineprotectedinherited

Definition at line 221 of file AtmosModel.h.

◆ SetAtmosNulneg() [2/2]

void Isis::AtmosModel::SetAtmosNulneg ( const string nulneg )

inherited

Set the Atmospheric function parameter.

This determines if negative values after removal of atmospheric effects will be set to NULL. This parameter is limited to values of YES or NO.

Parameters

nulneg Atmospheric function parameter, default is NO

Exceptions

Isis::IException::User "Invalid value of atmospheric nulneg"

Definition at line 861 of file AtmosModel.cpp.

References Isis::AtmosModel::SetAtmosNulneg(), and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosNulneg().

◆ SetAtmosPhi()

void Isis::AtmosModel::SetAtmosPhi ( const double phi )

inherited

Set the azimuth angle.

This method is only used for testing the methods in this class. This parameter is limited to values >=0 and <=360.

Parameters

phi	Internal atmospheric function parameter, there is no default

Exceptions

Isis::IException::User "Invalid value of atmospheric phi"

Definition at line 884 of file AtmosModel.cpp.

References Isis::PI, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosTau()

void Isis::AtmosModel::SetAtmosTau ( const double tau )

inherited

Set the Atmospheric function parameter.

This specifies the normal optical depth of the atmosphere. This parameter is limited to values that are >=0.

Parameters

tau	Atmospheric function parameter, default is 0.28

Exceptions

Isis::IException::User "Invalid value of atmospheric tau"

Definition at line 903 of file AtmosModel.cpp.

References Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosTauref()

void Isis::AtmosModel::SetAtmosTauref ( const double tauref )

inherited

Set the Atmospheric function parameter.

This specifies the reference optical depth of the atmosphere to which the image will be normalized. This parameter is limited to values that are >=0.

Parameters

tauref Atmospheric function parameter, default is 0.0

Exceptions

Isis::IException::User "Invalid value of atmospheric tauref"

Definition at line 922 of file AtmosModel.cpp.

References Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosWha()

void Isis::AtmosModel::SetAtmosWha ( const double wha )

inherited

Set the Atmospheric function parameter.

This is the single- scattering albedo of atmospheric particles. This parameter is limited to values that are >0 and <=1.

Parameters

wha	Atmospheric function parameter, default is 0.95

Exceptions

Isis::IException::User "Invalid value of atmospheric wha"

Definition at line 941 of file AtmosModel.cpp.

References Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetOldTau()

void Isis::AtmosModel::SetOldTau ( double tau )

inlineprotectedinherited

Definition at line 230 of file AtmosModel.h.

◆ SetOldWha()

void Isis::AtmosModel::SetOldWha ( double wha )

inlineprotectedinherited

Definition at line 233 of file AtmosModel.h.

◆ SetStandardConditions()

void Isis::AtmosModel::SetStandardConditions ( bool standard )

virtualinherited

Used to calculate atmosphere at standard conditions.

Definition at line 498 of file AtmosModel.cpp.

Referenced by Isis::AlbedoAtm::AlbedoAtm().

◆ StandardConditions()

bool Isis::AtmosModel::StandardConditions ( ) const

inlineprotectedinherited

Definition at line 240 of file AtmosModel.h.

◆ TauOrWhaChanged()

bool Isis::AtmosModel::TauOrWhaChanged ( ) const

protectedinherited

Checks whether tau or wha have changed.

Returns: bool True if either have changed.

Definition at line 954 of file AtmosModel.cpp.

References Isis::AtmosModel::AtmosTau(), and Isis::AtmosModel::AtmosWha().

Referenced by Isis::Anisotropic1::AtmosModelAlgorithm(), and Isis::Anisotropic2::AtmosModelAlgorithm().

Member Data Documentation

◆ p_alpha0

double Isis::Isotropic1::p_alpha0

private

Definition at line 54 of file Isotropic1.h.

◆ p_alpha1

double Isis::Isotropic1::p_alpha1

private

Definition at line 54 of file Isotropic1.h.

◆ p_alpha2

double Isis::Isotropic1::p_alpha2

private

Definition at line 54 of file Isotropic1.h.

◆ p_atmosAb

double Isis::AtmosModel::p_atmosAb

protectedinherited

Definition at line 266 of file AtmosModel.h.

◆ p_atmosAddOffset

bool Isis::AtmosModel::p_atmosAddOffset

protectedinherited

Allow additive offset in fit.

Definition at line 268 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosAdditiveOffset(), and Isis::AtmosModel::AtmosModel().

◆ p_atmosAhSpline

NumericalApproximation Isis::AtmosModel::p_atmosAhSpline

protectedinherited

Spline object for the atmospheric Ah Table. Properties are set in GenerateAhTable().

Definition at line 283 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosAhSpline(), and Isis::AtmosModel::GenerateAhTable().

◆ p_atmosAhTable

vector<double> Isis::AtmosModel::p_atmosAhTable

protectedinherited

Definition at line 271 of file AtmosModel.h.

◆ p_atmosAlgorithmName

string Isis::AtmosModel::p_atmosAlgorithmName

privateinherited

Definition at line 292 of file AtmosModel.h.

◆ p_atmosAtmSwitch

int Isis::AtmosModel::p_atmosAtmSwitch

protectedinherited

Definition at line 248 of file AtmosModel.h.

◆ p_atmosBha

double Isis::AtmosModel::p_atmosBha

protectedinherited

Definition at line 251 of file AtmosModel.h.

◆ p_atmosBhasave

double Isis::AtmosModel::p_atmosBhasave

protectedinherited

Definition at line 252 of file AtmosModel.h.

◆ p_atmosCosphi

double Isis::AtmosModel::p_atmosCosphi

protectedinherited

Definition at line 279 of file AtmosModel.h.

◆ p_atmosEstTau

bool Isis::AtmosModel::p_atmosEstTau

protectedinherited

Estimate optical depth tau using shadows.

Definition at line 269 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosModel().

◆ p_atmosEulgam

double Isis::AtmosModel::p_atmosEulgam

protectedinherited

Definition at line 280 of file AtmosModel.h.

◆ p_atmosHahgsb

double Isis::AtmosModel::p_atmosHahgsb

protectedinherited

Definition at line 272 of file AtmosModel.h.

◆ p_atmosHahgt0Spline

NumericalApproximation Isis::AtmosModel::p_atmosHahgt0Spline

protectedinherited

Spline object for the atmospheric Hahg0 Table. Properties are set in GenerateHahgTables().

Definition at line 287 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosHahgt0Spline(), and Isis::AtmosModel::GenerateHahgTables().

◆ p_atmosHahgt0Table

vector<double> Isis::AtmosModel::p_atmosHahgt0Table

protectedinherited

Definition at line 274 of file AtmosModel.h.

◆ p_atmosHahgtSpline

NumericalApproximation Isis::AtmosModel::p_atmosHahgtSpline

protectedinherited

Spline object for the atmospheric Hahg Table. Properties are set in GenerateHahgTables().

Definition at line 285 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosHahgtSpline(), and Isis::AtmosModel::GenerateHahgTables().

◆ p_atmosHahgtTable

vector<double> Isis::AtmosModel::p_atmosHahgtTable

protectedinherited

Definition at line 273 of file AtmosModel.h.

◆ p_atmosHga

double Isis::AtmosModel::p_atmosHga

protectedinherited

Definition at line 263 of file AtmosModel.h.

◆ p_atmosHgasave

double Isis::AtmosModel::p_atmosHgasave

protectedinherited

Definition at line 253 of file AtmosModel.h.

◆ p_atmosHnorm

double Isis::AtmosModel::p_atmosHnorm

protectedinherited

Atmospheric shell thickness normalized to planet radius.

Definition at line 267 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosHnorm(), Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), and Isis::AtmosModel::SetAtmosHnorm().

◆ p_atmosInc

double Isis::AtmosModel::p_atmosInc

protectedinherited

Definition at line 275 of file AtmosModel.h.

◆ p_atmosIncTable

vector<double> Isis::AtmosModel::p_atmosIncTable

protectedinherited

Definition at line 270 of file AtmosModel.h.

◆ p_atmosMunot

double Isis::AtmosModel::p_atmosMunot

protectedinherited

Definition at line 277 of file AtmosModel.h.

◆ p_atmosNinc

int Isis::AtmosModel::p_atmosNinc

protectedinherited

Definition at line 249 of file AtmosModel.h.

◆ p_atmosNulneg

bool Isis::AtmosModel::p_atmosNulneg

privateinherited

Definition at line 296 of file AtmosModel.h.

◆ p_atmosPhi

double Isis::AtmosModel::p_atmosPhi

protectedinherited

Definition at line 276 of file AtmosModel.h.

◆ p_atmosPM

PhotoModel* Isis::AtmosModel::p_atmosPM

privateinherited

Definition at line 294 of file AtmosModel.h.

◆ p_atmosSini

double Isis::AtmosModel::p_atmosSini

protectedinherited

Definition at line 278 of file AtmosModel.h.

◆ p_atmosTau

double Isis::AtmosModel::p_atmosTau

protectedinherited

Definition at line 264 of file AtmosModel.h.

◆ p_atmosTauold

double Isis::AtmosModel::p_atmosTauold

privateinherited

Definition at line 298 of file AtmosModel.h.

◆ p_atmosTauref

double Isis::AtmosModel::p_atmosTauref

protectedinherited

Definition at line 254 of file AtmosModel.h.

◆ p_atmosTausave

double Isis::AtmosModel::p_atmosTausave

protectedinherited

Definition at line 255 of file AtmosModel.h.

◆ p_atmosWha

double Isis::AtmosModel::p_atmosWha

protectedinherited

Definition at line 265 of file AtmosModel.h.

◆ p_atmosWhaold

double Isis::AtmosModel::p_atmosWhaold

privateinherited

Definition at line 299 of file AtmosModel.h.

◆ p_atmosWhasave

double Isis::AtmosModel::p_atmosWhasave

protectedinherited

Definition at line 256 of file AtmosModel.h.

◆ p_beta0

double Isis::Isotropic1::p_beta0

private

Definition at line 55 of file Isotropic1.h.

◆ p_beta1

double Isis::Isotropic1::p_beta1

private

Definition at line 55 of file Isotropic1.h.

◆ p_beta2

double Isis::Isotropic1::p_beta2

private

Definition at line 55 of file Isotropic1.h.

◆ p_delta

double Isis::Isotropic1::p_delta

private

Definition at line 49 of file Isotropic1.h.

◆ p_e2

double Isis::Isotropic1::p_e2

private

Definition at line 52 of file Isotropic1.h.

◆ p_e3

double Isis::Isotropic1::p_e3

private

Definition at line 52 of file Isotropic1.h.

◆ p_e4

double Isis::Isotropic1::p_e4

private

Definition at line 52 of file Isotropic1.h.

◆ p_e5

double Isis::Isotropic1::p_e5

private

Definition at line 52 of file Isotropic1.h.

◆ p_fixcon

double Isis::Isotropic1::p_fixcon

private

Definition at line 50 of file Isotropic1.h.

◆ p_gammax

double Isis::Isotropic1::p_gammax

private

Definition at line 51 of file Isotropic1.h.

◆ p_gammay

double Isis::Isotropic1::p_gammay

private

Definition at line 51 of file Isotropic1.h.

◆ p_pstd

double Isis::AtmosModel::p_pstd

protectedinherited

Pure atmospheric-scattering term.

Definition at line 258 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_sbar

double Isis::AtmosModel::p_sbar

protectedinherited

Illumination of the ground by the sky.

Definition at line 262 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_standardConditions

bool Isis::AtmosModel::p_standardConditions

privateinherited

Definition at line 290 of file AtmosModel.h.

◆ p_trans

double Isis::AtmosModel::p_trans

protectedinherited

Transmission of surface reflected light through the atmosphere overall.

Definition at line 259 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_trans0

double Isis::AtmosModel::p_trans0

protectedinherited

Transmission of surface reflected light through the atmosphere with no scatterings in the atmosphere.

Definition at line 260 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_transs

double Isis::AtmosModel::p_transs

protectedinherited

Transmission of light that must be subtracted from the flat surface model to get the shadow model.

Definition at line 261 of file AtmosModel.h.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_wha2

double Isis::Isotropic1::p_wha2

private

Definition at line 48 of file Isotropic1.h.

◆ p_x0

double Isis::Isotropic1::p_x0

private

Definition at line 53 of file Isotropic1.h.

◆ p_y0

double Isis::Isotropic1::p_y0

private

Definition at line 53 of file Isotropic1.h.

The documentation for this class was generated from the following files:

src/base/objs/Isotropic1/Isotropic1.h
src/base/objs/Isotropic1/Isotropic1.cpp

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ Isotropic1()

◆ ~Isotropic1()

Member Function Documentation

◆ AlgorithmName()

◆ AtmosAb()

◆ AtmosAdditiveOffset()

◆ AtmosAhSpline()

◆ AtmosAhTable()

◆ AtmosBha()

◆ AtmosHahgsb()

◆ AtmosHahgt0Spline()

◆ AtmosHahgt0Table()

◆ AtmosHahgtSpline()

◆ AtmosHahgtTable()

◆ AtmosHga()

◆ AtmosHnorm()

◆ AtmosIncTable()

◆ AtmosModelAlgorithm()

◆ AtmosMunot()

◆ AtmosNinc()

◆ AtmosNulneg()

◆ AtmosTau()

◆ AtmosTauref()

◆ AtmosWha()

◆ CalcAtmEffect()

◆ Ei()

◆ En()

◆ Eulgam()

◆ G11Prime()

◆ GenerateAhTable()

◆ GenerateHahgTables()

◆ GenerateHahgTablesShadow()

◆ GetPhotoModel()

◆ SetAlgorithmName()

◆ SetAtmosAtmSwitch()

◆ SetAtmosBha()

◆ SetAtmosEstTau() [1/2]

◆ SetAtmosEstTau() [2/2]

◆ SetAtmosHga()

◆ SetAtmosHnorm()

◆ SetAtmosInc()

◆ SetAtmosIord() [1/2]

◆ SetAtmosIord() [2/2]

◆ SetAtmosNulneg() [1/2]

◆ SetAtmosNulneg() [2/2]

◆ SetAtmosPhi()

◆ SetAtmosTau()

◆ SetAtmosTauref()

◆ SetAtmosWha()

◆ SetOldTau()

◆ SetOldWha()

◆ SetStandardConditions()

◆ StandardConditions()

◆ TauOrWhaChanged()

Member Data Documentation

◆ p_alpha0

◆ p_alpha1

◆ p_alpha2

◆ p_atmosAb

◆ p_atmosAddOffset

◆ p_atmosAhSpline

◆ p_atmosAhTable

◆ p_atmosAlgorithmName

◆ p_atmosAtmSwitch

◆ p_atmosBha

◆ p_atmosBhasave

◆ p_atmosCosphi

◆ p_atmosEstTau

◆ p_atmosEulgam

◆ p_atmosHahgsb

◆ p_atmosHahgt0Spline

◆ p_atmosHahgt0Table

◆ p_atmosHahgtSpline