gllnims2isis

This program will read and convert a PDS formatted Galileo Near Infrared Mapping Spectrometer file (downloaded as a *.qub file from a USGS PDS imaging node server) into two ISIS cubes. The first (CORE) cube contains primary mission data, and the second (SUFFIX) cube contains additional backplane data. The user must choose a path to an input NIMS cube, and an output path and name for both the core and suffix cubes.

The projections used for the original qube files are not compatible with ISIS projections, so projected Galileo NIMS qubes cannot be converted into equivalent ISIS cubes with mapping information directly. Instead, imported NIMS ISIS cubes are provided with a MappingInformation PVL group in the cube label. The information in this PVL group and latitude and longitude information from the output suffix cube can be used with the nocam2map ISIS application to produce a projected image. An example follows.

To use nocam2map in this way, first convert the Galileo NIMS PDS qube into an ISIS cube using gllnims2isis:

 
  gllnims2isis from=original.qub core=core.cub suffix=suffix.cub
	

Then, extract latitude and longitude cubes from the suffix cube. The first band is latitude, the second is longitude:

  cubeatt from=suffix.cub+1 to=latitude.cub
  cubeatt from=suffix.cub+2 to=longitude.cub
	

Next, use information from core.cub's MappingInfo PVL group to run nocam2map. Here is an example of the information contained in a MappingInfo PVL group:

  Group = MappingInformation
    LatitudeType            = Planetocentric
    LongitudeDirection      = PositiveWest
    MapResolution           = 0.334 <pixels/degree>
    MinimumLatitude         = -80.53 <degrees>
    MaximumLatitude         = 75.99 <degrees>
    MinimumLongitude        = 0.06 <degrees>
    MaximumLongitude        = 176.90 <degrees>
    MapProjectionType       = POINT_PERSPECTIVE
    MapScale                = 95.548 <km/pixel>
    MapProjectionRotation   = 0.22 <degrees>
    MajorEquatorialRadius  = 1830.00 <km>
    MinorEquatorialRadius = 1818.70 <km>
    PolarRadius             = 1815.30 <km>
  End_Group
	 

This information can be used to run nocam2map to project this cube into an ISIS-compatible projection. As you can see below, the MajorEquatorialRadius in the MappingInformation PVL group above lists the EQURADIUS to use in nocam2map, the PolarRadius lists the value to use for POLRADIUS, and the MapResolution is the value to use for RESOLUTION in nocam2map.

  nocam2map from=core.cub latcube=latitude.cub loncube=longitude.cub londir=positivewest to=projected.cub pixres=ppd resolution=0.334
  equradius=1830.00 polradius=1815.30

It isn't required, but the minimum and maximum latitude and longitude from the MappingInformation group can also be used in nocam2map to define the output range of the projection. For defining the projection to use, either a pre-existing map template can be used, or a new mapping label can be created from the information in the MappingInformation group.

See Also:

• The Near Infrared Mapping Spectrometer Experiment on Galileo

A detailed description of the Galileo NIMS instrument.

• Planetary Science Data Dictionary Document

  A standard reference for data product descriptions contained in Planetary Data System (PDS) data catalogs.

Description

Use this parameter to select the path to the NIMS cube.

Type	filename
File Mode	input
Filter	*.qub

Description

Use this parameter to select the output core data filename.

Type	cube
File Mode	output
Filter	*.cub

Description

Use this parameter to select the output cube for the ISIS backplane data.

Type	cube
File Mode	output
Filter	*.cub

This example shows how to import Galileo NIMS cubes into ISIS3.

gllnims2isis from=../go_1120/jupiter/33j002tr.qub core=../go_1120/jupiter/33j002tr_core.cub suffix=../go_1120/jupiter/33j002tr_suffix.cub

gllnims2isis GUI.

Example GUI Screenshot of the GUI with parameters filled in to execute the gllnims2isis application. Output cubes for core and suffix data are always required.

Output core data cube.	Output image of core data. Parameter Name: TO Output image of core data after gllnims2isis has imported it to ISIS3.
Output suffix data cube.	Output image of suffix data. Parameter Name: TO Output image of suffix (backplane) data after gllnims2isis has imported it to ISIS3.