#include <Isotropic2.h>

Inheritance diagram for Isis::Isotropic2:

Collaboration diagram for Isis::Isotropic2:

Public Member Functions
	Isotropic2 (Pvl &pvl, PhotoModel &pmodel)

virtual	~Isotropic2 ()

void	CalcAtmEffect (double pha, double inc, double ema, double pstd, double trans, double trans0, double sbar, double *transs)
	Calculate the atmospheric scattering effect using photometric angle information.

virtual void	SetStandardConditions (bool standard)
	Used to calculate atmosphere at standard conditions.

void	GenerateAhTable ()
	This method computes the values of the atmospheric Ah table and sets the properties of the atmospheric Ah spline.

void	GenerateHahgTables ()
	This method computes the values of the atmospheric Hahg and Hahg0 tables and sets the properties of the atmospheric Hahg and Hahg0 splines.

void	GenerateHahgTablesShadow ()
	This method is a modified version of the GenerateHahgTables method and is used solely for shadow modeling.

void	SetAtmosAtmSwitch (const int atmswitch)
	Set the switch that controls the function that will be integrated.

void	SetAtmosBha (const double bha)
	Set the Anisotropic Atmospheric function parameter.

void	SetAtmosHga (const double hga)
	Set the Hapke atmospheric function parameter.

void	SetAtmosInc (const double inc)
	Set the incidence angle.

void	SetAtmosNulneg (const string nulneg)
	Set the Atmospheric function parameter.

void	SetAtmosPhi (const double phi)
	Set the azimuth angle.

void	SetAtmosTau (const double tau)
	Set the Atmospheric function parameter.

void	SetAtmosTauref (const double tauref)
	Set the Atmospheric function parameter.

void	SetAtmosWha (const double wha)
	Set the Atmospheric function parameter.

void	SetAtmosHnorm (const double hnorm)
	Set the Atmospheric function parameter.

void	SetAtmosIord (const string offset)
	Set additive offset in fit.

void	SetAtmosEstTau (const string esttau)
	Estimate the optical depth tau using shadows.

string	AlgorithmName () const
	Return atmospheric algorithm name.

bool	AtmosAdditiveOffset () const
	Allow additive offset in fit?

double	AtmosHnorm () const
	Return atmospheric Hnorm value.

double	AtmosBha () const
	Return atmospheric Bha value.

double	AtmosTau () const
	Return atmospheric Tau value.

double	AtmosWha () const
	Return atmospheric Wha value.

double	AtmosHga () const
	Return atmospheric Hga value.

double	AtmosTauref () const
	Return atmospheric Tauref value.

bool	AtmosNulneg () const
	Return atmospheric Nulneg value.

double	AtmosAb () const
	Return atmospheric Ab value.

double	AtmosHahgsb () const
	Return atmospheric Hahgsb value.

int	AtmosNinc () const
	Return atmospheric Ninc value.

double	AtmosMunot () const
	Return atmospheric Munot value.

vector< double >	AtmosIncTable ()
	Return atmospheric IncTable value.

vector< double >	AtmosAhTable ()
	Return atmospheric AhTable value.

vector< double >	AtmosHahgtTable ()
	Return atmospheric HahgtTable value.

vector< double >	AtmosHahgt0Table ()
	Return atmospheric Hahgt0Table value.

NumericalApproximation	AtmosAhSpline ()
	If GenerateAhTable() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosAhTable) with first derivatives of the endpoints equal to 1.0e30.

NumericalApproximation	AtmosHahgtSpline ()
	If GenerateHahgTables() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosHahgtTable) with first derivatives of the endpoints equal to 1.0e30.

NumericalApproximation	AtmosHahgt0Spline ()
	If GenerateHahgTables() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosHahgt0Table) with first derivatives of the endpoints equal to 1.0e30.

Static Public Member Functions
static double	G11Prime (double tau)
	Perform Chandra and Van de Hulst's series approximation for the g'11 function needed in second order scattering theory.

static double	Ei (double x)
	This routine computes the exponential integral, Ei(x).

static double	En (unsigned int n, double x)
	This routine evaluates the generalized exponential integral, E_n(x).

Protected Member Functions
virtual void	AtmosModelAlgorithm (double phase, double incidence, double emission)
	Isotropic atmospheric scattering in the first approximation The model for scattering for a general, non-Lambertian surface with an atmosphere looks like this:

void	SetAtmosNulneg (bool nulneg)

void	SetAtmosIord (bool offset)

void	SetAtmosEstTau (bool esttau)

void	SetAlgorithmName (string name)

void	SetOldTau (double tau)

void	SetOldWha (double wha)

PhotoModel *	GetPhotoModel () const

bool	StandardConditions () const

bool	TauOrWhaChanged () const
	Checks whether tau or wha have changed.

double	Eulgam () const

Protected Attributes
int	p_atmosAtmSwitch

int	p_atmosNinc

double	p_atmosBha

double	p_atmosBhasave

double	p_atmosHgasave

double	p_atmosTauref

double	p_atmosTausave

double	p_atmosWhasave

double	p_pstd
	Pure atmospheric-scattering term.

double	p_trans
	Transmission of surface reflected light through the atmosphere overall.

double	p_trans0
	Transmission of surface reflected light through the atmosphere with no scatterings in the atmosphere.

double	p_transs
	Transmission of light that must be subtracted from the flat surface model to get the shadow model.

double	p_sbar
	Illumination of the ground by the sky.

double	p_atmosHga

double	p_atmosTau

double	p_atmosWha

double	p_atmosAb

double	p_atmosHnorm
	Atmospheric shell thickness normalized to planet radius.

bool	p_atmosAddOffset
	Allow additive offset in fit.

bool	p_atmosEstTau
	Estimate optical depth tau using shadows.

vector< double >	p_atmosIncTable

vector< double >	p_atmosAhTable

double	p_atmosHahgsb

vector< double >	p_atmosHahgtTable

vector< double >	p_atmosHahgt0Table

double	p_atmosInc

double	p_atmosPhi

double	p_atmosMunot

double	p_atmosSini

double	p_atmosCosphi

double	p_atmosEulgam

NumericalApproximation	p_atmosAhSpline
	Spline object for the atmospheric Ah Table. Properties are set in GenerateAhTable().

NumericalApproximation	p_atmosHahgtSpline
	Spline object for the atmospheric Hahg Table. Properties are set in GenerateHahgTables().

NumericalApproximation	p_atmosHahgt0Spline
	Spline object for the atmospheric Hahg0 Table. Properties are set in GenerateHahgTables().

Detailed Description

Author: 1998-12-21 Randy Kirk

Constructor & Destructor Documentation

◆ Isotropic2()

Isis::Isotropic2::Isotropic2	(	Pvl &	pvl,
		PhotoModel &	pmodel )

◆ ~Isotropic2()

virtual Isis::Isotropic2::~Isotropic2 ( )

inlinevirtual

Member Function Documentation

◆ AlgorithmName()

string Isis::AtmosModel::AlgorithmName ( ) const

inlineinherited

Return atmospheric algorithm name.

◆ AtmosAb()

double Isis::AtmosModel::AtmosAb ( ) const

inlineinherited

Return atmospheric Ab value.

References Isis::AtmosModel::p_atmosAb.

Referenced by Isis::AlbedoAtm::NormModelAlgorithm(), Isis::ShadeAtm::NormModelAlgorithm(), Isis::TopoAtm::NormModelAlgorithm(), and Isis::TopoAtm::TopoAtm().

◆ AtmosAdditiveOffset()

bool Isis::AtmosModel::AtmosAdditiveOffset ( ) const

inlineinherited

Allow additive offset in fit?

References Isis::AtmosModel::p_atmosAddOffset.

◆ AtmosAhSpline()

NumericalApproximation Isis::AtmosModel::AtmosAhSpline ( )

inlineinherited

If GenerateAhTable() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosAhTable) with first derivatives of the endpoints equal to 1.0e30.

Otherwise, it is a natural cubic spline with an empty data set.

Returns: NumericalApproximation Cubic spline

References Isis::AtmosModel::p_atmosAhSpline.

Referenced by Isis::AlbedoAtm::AlbedoAtm(), Isis::AlbedoAtm::NormModelAlgorithm(), Isis::ShadeAtm::NormModelAlgorithm(), Isis::TopoAtm::NormModelAlgorithm(), and Isis::TopoAtm::TopoAtm().

◆ AtmosAhTable()

vector< double > Isis::AtmosModel::AtmosAhTable ( )

inlineinherited

Return atmospheric AhTable value.

References Isis::AtmosModel::p_atmosAhTable.

◆ AtmosBha()

double Isis::AtmosModel::AtmosBha ( ) const

inlineinherited

Return atmospheric Bha value.

References Isis::AtmosModel::p_atmosBha.

◆ AtmosHahgsb()

double Isis::AtmosModel::AtmosHahgsb ( ) const

inlineinherited

Return atmospheric Hahgsb value.

References Isis::AtmosModel::p_atmosHahgsb.

◆ AtmosHahgt0Spline()

NumericalApproximation Isis::AtmosModel::AtmosHahgt0Spline ( )

inlineinherited

If GenerateHahgTables() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosHahgt0Table) with first derivatives of the endpoints equal to 1.0e30.

Otherwise, it is a natural cubic spline with an empty data set.

Returns: NumericalApproximation Cubic spline

References Isis::AtmosModel::p_atmosHahgt0Spline.

◆ AtmosHahgt0Table()

vector< double > Isis::AtmosModel::AtmosHahgt0Table ( )

inlineinherited

Return atmospheric Hahgt0Table value.

References Isis::AtmosModel::p_atmosHahgt0Table.

◆ AtmosHahgtSpline()

NumericalApproximation Isis::AtmosModel::AtmosHahgtSpline ( )

inlineinherited

If GenerateHahgTables() has been called this returns a clamped cubic spline of the data set (p_atmosIncTable, p_atmosHahgtTable) with first derivatives of the endpoints equal to 1.0e30.

Otherwise, it is a natural cubic spline with an empty data set.

Returns: NumericalApproximation Cubic spline

References Isis::AtmosModel::p_atmosHahgtSpline.

◆ AtmosHahgtTable()

vector< double > Isis::AtmosModel::AtmosHahgtTable ( )

inlineinherited

Return atmospheric HahgtTable value.

References Isis::AtmosModel::p_atmosHahgtTable.

◆ AtmosHga()

double Isis::AtmosModel::AtmosHga ( ) const

inlineinherited

Return atmospheric Hga value.

References Isis::AtmosModel::p_atmosHga.

◆ AtmosHnorm()

double Isis::AtmosModel::AtmosHnorm ( ) const

inlineinherited

Return atmospheric Hnorm value.

References Isis::AtmosModel::p_atmosHnorm.

◆ AtmosIncTable()

vector< double > Isis::AtmosModel::AtmosIncTable ( )

inlineinherited

Return atmospheric IncTable value.

References Isis::AtmosModel::p_atmosIncTable.

◆ AtmosModelAlgorithm()

void Isis::Isotropic2::AtmosModelAlgorithm	(	double	phase,
		double	incidence,
		double	emission )

protectedvirtual

Isotropic atmospheric scattering in the first approximation The model for scattering for a general, non-Lambertian surface with an atmosphere looks like this:

P = Pstd + trans*(rho*Ah*munot)/(1.d0-rho*Ab*sbar) trans0*rho*(psurf-Ah*munot)

where P is the overall photometric function (the model of the data), PSTD is the pure atmospheric-scattering term, PSURF is the surface photometric function, AH*MUNOT is a Lambertian approximation to this with hemispheric albedo AH, TRANS and TRANS0 quantify transmission of surface reflected light through the atmosphere overall and with no scatterings in the atmosphere, and finally SBAR quantifies the illumination of the ground by the sky. RHO is the ratio of the sur- face albedo to the albedo assumed in the functional form of PSURF.

Parameters

phase	Value of the phase angle.
incidence	Value of the incidence angle.
emission	Value of the emission angle.

History

1998-12-21 Randy Kirk, USGS, Flagstaff - Original code

1999-03-12 K Teal Thompson Port to Unix/ISIS; declare vars; add implicit none.

2007-02-20 Janet Barrett - Imported from Isis2 pht_atm_functions to Isis3.

2008-11-05 Jeannie Walldren - Replaced reference to NumericalMethods::r8expint() with AtmosModel::En(), NumericalMethods::G11Prime() with AtmosModel::G11Prime(), and NumericalMethods::r8ei() with AtmosModel::Ei(). Replaced Isis::PI with PI since this is in Isis namespace.

2011-12-19 Janet Barrett - Added code to estimate the shadow brightness value (transs). Also got rid of unnecessary check for identical photometric angle values between successive calls. This check should only be made in the photometric models.

Implements Isis::AtmosModel.

References _FILEINFO_, Isis::AtmosModel::Ei(), Isis::AtmosModel::En(), Isis::AtmosModel::Eulgam(), Isis::AtmosModel::G11Prime(), Isis::AtmosModel::p_atmosHnorm, Isis::AtmosModel::p_atmosTau, Isis::AtmosModel::p_atmosWha, Isis::AtmosModel::p_pstd, Isis::AtmosModel::p_sbar, Isis::AtmosModel::p_trans, Isis::AtmosModel::p_trans0, Isis::AtmosModel::p_transs, Isis::PI, Isis::AtmosModel::SetOldTau(), Isis::AtmosModel::SetOldWha(), Isis::AtmosModel::TauOrWhaChanged(), and Isis::IException::Unknown.

◆ AtmosMunot()

double Isis::AtmosModel::AtmosMunot ( ) const

inlineinherited

Return atmospheric Munot value.

References Isis::AtmosModel::p_atmosMunot.

◆ AtmosNinc()

int Isis::AtmosModel::AtmosNinc ( ) const

inlineinherited

Return atmospheric Ninc value.

References Isis::AtmosModel::p_atmosNinc.

◆ AtmosNulneg()

bool Isis::AtmosModel::AtmosNulneg ( ) const

inlineinherited

Return atmospheric Nulneg value.

◆ AtmosTau()

double Isis::AtmosModel::AtmosTau ( ) const

inlineinherited

Return atmospheric Tau value.

References Isis::AtmosModel::p_atmosTau.

Referenced by Isis::AtmosModel::TauOrWhaChanged().

◆ AtmosTauref()

double Isis::AtmosModel::AtmosTauref ( ) const

inlineinherited

Return atmospheric Tauref value.

References Isis::AtmosModel::p_atmosTauref.

◆ AtmosWha()

double Isis::AtmosModel::AtmosWha ( ) const

inlineinherited

Return atmospheric Wha value.

References Isis::AtmosModel::p_atmosWha.

Referenced by Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::AtmosModel::GenerateHahgTables(), Isis::AtmosModel::GenerateHahgTablesShadow(), and Isis::AtmosModel::TauOrWhaChanged().

◆ CalcAtmEffect()

void Isis::AtmosModel::CalcAtmEffect	(	double	pha,
		double	inc,
		double	ema,
		double *	pstd,
		double *	trans,
		double *	trans0,
		double *	sbar,
		double *	transs )

inherited

Calculate the atmospheric scattering effect using photometric angle information.

Parameters

pha	phase angle
inc	incidence angle
ema	emission angle
pstd	pure atmospheric-scattering term
trans	transmission of surface reflected light through the atmosphere overall
trans0	transmission of surface reflected light through the atmosphere with no scatterings in the atmosphere
sbar	illumination of the ground by the sky

Exceptions

Isis::IException::User "Invalid photometric angles"

References Isis::AtmosModel::AtmosModelAlgorithm(), Isis::AtmosModel::p_pstd, Isis::AtmosModel::p_sbar, Isis::AtmosModel::p_trans, Isis::AtmosModel::p_trans0, and Isis::AtmosModel::p_transs.

Referenced by Isis::AlbedoAtm::AlbedoAtm(), Isis::AlbedoAtm::NormModelAlgorithm(), Isis::ShadeAtm::NormModelAlgorithm(), Isis::TopoAtm::NormModelAlgorithm(), and Isis::TopoAtm::TopoAtm().

◆ Ei()

double Isis::AtmosModel::Ei ( double x )

staticinherited

This routine computes the exponential integral, Ei(x).

This is defined as

\[ Ei(x) = - \int_{-x}^{\infty} \frac{e^{-t}}{t}\mathrm{d}t = \int_{-\infty}^{x} \frac{e^{t}}{t}\mathrm{d}t \]

for x > 0.

For small x, this method uses the power series,

\[ Ei(x) = \gamma + \ln x + \frac{x}{1*1!} + \frac{x^2}{2*2!} + ... \]

where \( \gamma = 0.5772156649... \) is Euler's constant, and for large x, the asymptotic series is used,

\[ Ei(x) \sim \frac{e^x}{x} (1 + \frac{1!}{x} + \frac{2!}{x^2} + ...) \]

See also: mathworld.wolfram.com/ExponentialIntegral.html

Parameters

x	Value at which the exponential integral will be computed, x > 0.0

Returns: double The exponential integral for the given x.

Exceptions

Isis::IException::Programmer	"Invalid arguments. Definition requires x > 0.0."
Isis::IException::Math	"Power series failed to converge"

References _FILEINFO_, Isis::IException::Programmer, and Isis::IException::Unknown.

Referenced by Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), and AtmosModelAlgorithm().

◆ En()

double Isis::AtmosModel::En	(	unsigned int	n,
		double	x )

staticinherited

This routine evaluates the generalized exponential integral, E_n(x).

This is defined as

\[ E_n(x) = \int_{1}^{\infty} \frac{e^{-xt}}{t^n}\mathrm{d}t \mathrm{ for } x \in \mathbb{R }, n \in \mathbb{Z } \mathrm{such that } x \ge 0.0, n \ge 0 \]

Notice that if x = 0, then the equation is not defined for n = 0 or n = 1, as these will result in \( E_n(x) = \infty \).

This method uses the following for cases:

For n > 1 and x = 0.0,
\[ E_n(0) = \frac{1}{n-1} \]
For n = 0 and x > 0.0,
\[ E_0(x) = \frac{e^{-x}}{x} \]
For \( x >\sim 1.0 \), Lentz's continued fraction algorithm is used,
\[ E_n(x) = e^{-x}(\frac{1}{x + n - \frac{1*n}{x + n + 2 - \frac{2(n+1)}{x + n + 4 - ...}}}) \]
For \( 0.0 < x <\sim 1.0 \), series representation is used,
\[ E_n(x) = \frac{(-x)^{n-1}}{(n-1)!}[- \ln x + \psi (n)] - \sum_{m=0, m \neq n-1}^{\infty}\frac{(-x)^m}{(m-n+1)m!} \]
where \( \psi (1) = \gamma \) and \( \psi (n) = - \gamma + \sum_{m=1}^{n-1} \frac{1}{m}\) and \( \gamma = 0.5772156649... \) is Euler's constant.

The parameter n is of type unsigned int since n cannot be negative.

The routine allows fast evaluation of E_n(x) to any accuracy, \(\epsilon\), within the reach of your machine's word length for floating-point numbers. The only modification required for increased accuracy is to supply Euler's constant with enough significant digits.

See also: mathworld.wolfram.com/En-Function.html

Parameters

n	Integer value at which the exponential integral will be evaluated (n >= 0)
x	The exponential integral En(x) will be evaluated

Returns: double Value of the exponential integral for the give n and x.

Exceptions

Isis::IException::Programmer	"Invalid arguments. Definition requires (x > 0.0 and n >=0 ) or (x >= 0.0 and n > 1)."
Isis::IException::Math	"Continued fraction failed to converge"
Isis::IException::Math	"Series representation failed to converge"

References _FILEINFO_, Isis::IException::Programmer, and Isis::IException::Unknown.

Referenced by Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), and Isis::AtmosModel::G11Prime().

◆ Eulgam()

double Isis::AtmosModel::Eulgam ( ) const

inlineprotectedinherited

References Isis::AtmosModel::p_atmosEulgam.

Referenced by Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), and AtmosModelAlgorithm().

◆ G11Prime()

double Isis::AtmosModel::G11Prime ( double tau )

staticinherited

Perform Chandra and Van de Hulst's series approximation for the g'11 function needed in second order scattering theory.

Parameters

tau	normal optical depth of atmosphere

Returns: double Value of the g'11 function evaluated at the given tau

References Isis::AtmosModel::En(), MAX, and Isis::PI.

Referenced by Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), and AtmosModelAlgorithm().

◆ GenerateAhTable()

void Isis::AtmosModel::GenerateAhTable ( )

inherited

This method computes the values of the atmospheric Ah table and sets the properties of the atmospheric Ah spline.

It obtains the hemispheric albedo by integrating the photometric function times mu over mu = 0 to 1 and then over phi = 0 to 2*pi to calculate the hemispheric reflectance Ah needed for the photometric model with atmosphere. The Trapezoid rule is applied to the table of Ah to obtain bihemispheric albedo Ab. The parameter p_atmosAtmSwitch is set to 0 to integrate Ah.

Referenced by Isis::AlbedoAtm::AlbedoAtm(), Isis::ShadeAtm::NormModelAlgorithm(), and Isis::TopoAtm::TopoAtm().

◆ GenerateHahgTables()

void Isis::AtmosModel::GenerateHahgTables ( )

inherited

This method computes the values of the atmospheric Hahg and Hahg0 tables and sets the properties of the atmospheric Hahg and Hahg0 splines.

It integrates functions involving the single particle phase function (assumed to be Hapke Henyey-Greenstein) over mu = 0 to 1 and then over phi = 0 to 2*pi to calculate the corrections needed for the anisotropic photometric model with atmosphere. The Trapezoid rule is applied to the table of Ah to obtain bihemispheric albedo Ab. The parameter p_atmosAtmSwitch is set to 1, 2, 3 to evaluate the 3 required integrals.

Referenced by Isis::HapkeAtm1::AtmosModelAlgorithm(), and Isis::HapkeAtm2::AtmosModelAlgorithm().

◆ GenerateHahgTablesShadow()

void Isis::AtmosModel::GenerateHahgTablesShadow ( )

inherited

This method is a modified version of the GenerateHahgTables method and is used solely for shadow modeling.

Unlike the GenerateHahgTables method, this method does not tabulate the first or third integrals. It only evaluates the middle integral that corrects the sbar variable (illumination of the ground by the sky).

References Isis::AtmosModel::AtmosWha(), Isis::NumericalAtmosApprox::OuterFunction, Isis::AtmosModel::p_atmosAtmSwitch, Isis::AtmosModel::p_atmosHahgsb, Isis::AtmosModel::p_atmosInc, Isis::AtmosModel::p_atmosMunot, Isis::AtmosModel::p_atmosSini, and Isis::PI.

Referenced by Isis::HapkeAtm1::AtmosModelAlgorithm(), and Isis::HapkeAtm2::AtmosModelAlgorithm().

◆ GetPhotoModel()

PhotoModel * Isis::AtmosModel::GetPhotoModel ( ) const

inlineprotectedinherited

◆ SetAlgorithmName()

void Isis::AtmosModel::SetAlgorithmName ( string name )

inlineprotectedinherited

◆ SetAtmosAtmSwitch()

void Isis::AtmosModel::SetAtmosAtmSwitch ( const int atmswitch )

inherited

Set the switch that controls the function that will be integrated.

This method is only used for testing the methods in this class. This parameter is limited to the values 0, 1, 2, and 3.

Parameters

atmswitch Internal atmospheric function parameter, there is no default

Exceptions

Isis::IException::User "Invalid value of atmospheric atmswitch"

References _FILEINFO_, Isis::AtmosModel::p_atmosAtmSwitch, and Isis::IException::User.

◆ SetAtmosBha()

void Isis::AtmosModel::SetAtmosBha ( const double bha )

inherited

Set the Anisotropic Atmospheric function parameter.

This is the coefficient of the single particle Legendre phase function. This parameter is limited to values that are >=-1 and <=1.

Parameters

bha	Anisotropic atmospheric function parameter, default is 0.85

Exceptions

Isis::IException::User "Invalid value of atmospheric bha"

References _FILEINFO_, Isis::AtmosModel::p_atmosBha, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosEstTau() [1/2]

void Isis::AtmosModel::SetAtmosEstTau ( bool esttau )

inlineprotectedinherited

References Isis::AtmosModel::p_atmosEstTau.

◆ SetAtmosEstTau() [2/2]

void Isis::AtmosModel::SetAtmosEstTau ( const string esttau )

inherited

Estimate the optical depth tau using shadows.

Author: Janet Barrett (12/16/2011)

Parameters

esttau true/false

References _FILEINFO_, Isis::AtmosModel::SetAtmosEstTau(), and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosEstTau().

◆ SetAtmosHga()

void Isis::AtmosModel::SetAtmosHga ( const double hga )

inherited

Set the Hapke atmospheric function parameter.

This is the coefficient of the single particle Henyey-Greenstein phase function. This parameter is limited to values that are >-1 and <1.

Parameters

hga	Hapke atmospheric function parameter, default is 0.68

Exceptions

Isis::IException::User "Invalid value of atmospheric hga"

References _FILEINFO_, Isis::AtmosModel::p_atmosHga, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosHnorm()

void Isis::AtmosModel::SetAtmosHnorm ( const double hnorm )

inherited

Set the Atmospheric function parameter.

This is the atmospheric shell thickness normalized to the planet radius and is used to modify angles to get more accurate path lengths near the terminator (ratio of scale height to the planetary radius). This parameter is limited to values that are >=0.

Parameters

hnorm Atmospheric function parameter, default is 0.003

References _FILEINFO_, Isis::AtmosModel::p_atmosHnorm, Isis::toString(), and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosInc()

void Isis::AtmosModel::SetAtmosInc ( const double inc )

inherited

Set the incidence angle.

This method is only used for testing the methods in this class. This parameter is limited to values >=0 and <=90.

Parameters

inc	Internal atmospheric function parameter, there is no default

Exceptions

Isis::IException::User "Invalid value of atmospheric inc"

References _FILEINFO_, Isis::AtmosModel::p_atmosInc, Isis::AtmosModel::p_atmosMunot, Isis::AtmosModel::p_atmosSini, Isis::PI, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosIord() [1/2]

void Isis::AtmosModel::SetAtmosIord ( bool offset )

inlineprotectedinherited

References Isis::AtmosModel::p_atmosAddOffset.

◆ SetAtmosIord() [2/2]

void Isis::AtmosModel::SetAtmosIord ( const string offset )

inherited

Set additive offset in fit.

Author: Sharmila Prasad (8/18/2011)

Parameters

offset true/false

References _FILEINFO_, Isis::AtmosModel::SetAtmosIord(), and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosIord().

◆ SetAtmosNulneg() [1/2]

void Isis::AtmosModel::SetAtmosNulneg ( bool nulneg )

inlineprotectedinherited

◆ SetAtmosNulneg() [2/2]

void Isis::AtmosModel::SetAtmosNulneg ( const string nulneg )

inherited

Set the Atmospheric function parameter.

This determines if negative values after removal of atmospheric effects will be set to NULL. This parameter is limited to values of YES or NO.

Parameters

nulneg Atmospheric function parameter, default is NO

Exceptions

Isis::IException::User "Invalid value of atmospheric nulneg"

References _FILEINFO_, Isis::AtmosModel::SetAtmosNulneg(), and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosNulneg().

◆ SetAtmosPhi()

void Isis::AtmosModel::SetAtmosPhi ( const double phi )

inherited

Set the azimuth angle.

This method is only used for testing the methods in this class. This parameter is limited to values >=0 and <=360.

Parameters

phi	Internal atmospheric function parameter, there is no default

Exceptions

Isis::IException::User "Invalid value of atmospheric phi"

References _FILEINFO_, Isis::AtmosModel::p_atmosCosphi, Isis::AtmosModel::p_atmosPhi, Isis::PI, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosTau()

void Isis::AtmosModel::SetAtmosTau ( const double tau )

inherited

Set the Atmospheric function parameter.

This specifies the normal optical depth of the atmosphere. This parameter is limited to values that are >=0.

Parameters

tau	Atmospheric function parameter, default is 0.28

Exceptions

Isis::IException::User "Invalid value of atmospheric tau"

References _FILEINFO_, Isis::AtmosModel::p_atmosTau, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosTauref()

void Isis::AtmosModel::SetAtmosTauref ( const double tauref )

inherited

Set the Atmospheric function parameter.

This specifies the reference optical depth of the atmosphere to which the image will be normalized. This parameter is limited to values that are >=0.

Parameters

tauref Atmospheric function parameter, default is 0.0

Exceptions

Isis::IException::User "Invalid value of atmospheric tauref"

References _FILEINFO_, Isis::AtmosModel::p_atmosTauref, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetAtmosWha()

void Isis::AtmosModel::SetAtmosWha ( const double wha )

inherited

Set the Atmospheric function parameter.

This is the single- scattering albedo of atmospheric particles. This parameter is limited to values that are >0 and <=1.

Parameters

wha	Atmospheric function parameter, default is 0.95

Exceptions

Isis::IException::User "Invalid value of atmospheric wha"

References _FILEINFO_, Isis::AtmosModel::p_atmosWha, and Isis::IException::User.

Referenced by Isis::AtmosModel::AtmosModel().

◆ SetOldTau()

void Isis::AtmosModel::SetOldTau ( double tau )

inlineprotectedinherited

Referenced by Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), and AtmosModelAlgorithm().

◆ SetOldWha()

void Isis::AtmosModel::SetOldWha ( double wha )

inlineprotectedinherited

Referenced by Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), and AtmosModelAlgorithm().

◆ SetStandardConditions()

void Isis::AtmosModel::SetStandardConditions ( bool standard )

virtualinherited

Used to calculate atmosphere at standard conditions.

References Isis::AtmosModel::p_atmosTau, Isis::AtmosModel::p_atmosTauref, and Isis::AtmosModel::p_atmosTausave.

Referenced by Isis::AlbedoAtm::AlbedoAtm(), and Isis::TopoAtm::TopoAtm().

◆ StandardConditions()

bool Isis::AtmosModel::StandardConditions ( ) const

inlineprotectedinherited

◆ TauOrWhaChanged()

bool Isis::AtmosModel::TauOrWhaChanged ( ) const

protectedinherited

Checks whether tau or wha have changed.

Returns: bool True if either have changed.

References Isis::AtmosModel::AtmosTau(), and Isis::AtmosModel::AtmosWha().

Referenced by Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), and AtmosModelAlgorithm().

Member Data Documentation

◆ p_atmosAb

double Isis::AtmosModel::p_atmosAb

protectedinherited

Referenced by Isis::AtmosModel::AtmosAb(), Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::GenerateAhTable().

◆ p_atmosAddOffset

bool Isis::AtmosModel::p_atmosAddOffset

protectedinherited

Allow additive offset in fit.

Referenced by Isis::AtmosModel::AtmosAdditiveOffset(), Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosIord().

◆ p_atmosAhSpline

NumericalApproximation Isis::AtmosModel::p_atmosAhSpline

protectedinherited

Spline object for the atmospheric Ah Table. Properties are set in GenerateAhTable().

Referenced by Isis::AtmosModel::AtmosAhSpline(), and Isis::AtmosModel::GenerateAhTable().

◆ p_atmosAhTable

vector<double> Isis::AtmosModel::p_atmosAhTable

protectedinherited

Referenced by Isis::AtmosModel::AtmosAhTable(), Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::GenerateAhTable().

◆ p_atmosAtmSwitch

int Isis::AtmosModel::p_atmosAtmSwitch

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::AtmosModel::GenerateAhTable(), Isis::AtmosModel::GenerateHahgTables(), Isis::AtmosModel::GenerateHahgTablesShadow(), and Isis::AtmosModel::SetAtmosAtmSwitch().

◆ p_atmosBha

double Isis::AtmosModel::p_atmosBha

protectedinherited

Referenced by Isis::AtmosModel::AtmosBha(), Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), and Isis::AtmosModel::SetAtmosBha().

◆ p_atmosBhasave

double Isis::AtmosModel::p_atmosBhasave

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel().

◆ p_atmosCosphi

double Isis::AtmosModel::p_atmosCosphi

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosPhi().

◆ p_atmosEstTau

bool Isis::AtmosModel::p_atmosEstTau

protectedinherited

Estimate optical depth tau using shadows.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), and Isis::AtmosModel::SetAtmosEstTau().

◆ p_atmosEulgam

double Isis::AtmosModel::p_atmosEulgam

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::Eulgam().

◆ p_atmosHahgsb

double Isis::AtmosModel::p_atmosHahgsb

protectedinherited

Referenced by Isis::AtmosModel::AtmosHahgsb(), Isis::AtmosModel::AtmosModel(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::AtmosModel::GenerateHahgTables(), and Isis::AtmosModel::GenerateHahgTablesShadow().

◆ p_atmosHahgt0Spline

NumericalApproximation Isis::AtmosModel::p_atmosHahgt0Spline

protectedinherited

Spline object for the atmospheric Hahg0 Table. Properties are set in GenerateHahgTables().

Referenced by Isis::AtmosModel::AtmosHahgt0Spline(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), and Isis::AtmosModel::GenerateHahgTables().

◆ p_atmosHahgt0Table

vector<double> Isis::AtmosModel::p_atmosHahgt0Table

protectedinherited

Referenced by Isis::AtmosModel::AtmosHahgt0Table(), Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::GenerateHahgTables().

◆ p_atmosHahgtSpline

NumericalApproximation Isis::AtmosModel::p_atmosHahgtSpline

protectedinherited

Spline object for the atmospheric Hahg Table. Properties are set in GenerateHahgTables().

Referenced by Isis::AtmosModel::AtmosHahgtSpline(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), and Isis::AtmosModel::GenerateHahgTables().

◆ p_atmosHahgtTable

vector<double> Isis::AtmosModel::p_atmosHahgtTable

protectedinherited

Referenced by Isis::AtmosModel::AtmosHahgtTable(), Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::GenerateHahgTables().

◆ p_atmosHga

double Isis::AtmosModel::p_atmosHga

protectedinherited

Referenced by Isis::AtmosModel::AtmosHga(), Isis::AtmosModel::AtmosModel(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), and Isis::AtmosModel::SetAtmosHga().

◆ p_atmosHgasave

double Isis::AtmosModel::p_atmosHgasave

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel().

◆ p_atmosHnorm

double Isis::AtmosModel::p_atmosHnorm

protectedinherited

Atmospheric shell thickness normalized to planet radius.

Referenced by Isis::AtmosModel::AtmosHnorm(), Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), and Isis::AtmosModel::SetAtmosHnorm().

◆ p_atmosInc

double Isis::AtmosModel::p_atmosInc

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::AtmosModel::GenerateAhTable(), Isis::AtmosModel::GenerateHahgTables(), Isis::AtmosModel::GenerateHahgTablesShadow(), and Isis::AtmosModel::SetAtmosInc().

◆ p_atmosIncTable

vector<double> Isis::AtmosModel::p_atmosIncTable

protectedinherited

Referenced by Isis::AtmosModel::AtmosIncTable(), Isis::AtmosModel::AtmosModel(), Isis::AtmosModel::GenerateAhTable(), and Isis::AtmosModel::GenerateHahgTables().

◆ p_atmosMunot

double Isis::AtmosModel::p_atmosMunot

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::AtmosModel::AtmosMunot(), Isis::AtmosModel::GenerateAhTable(), Isis::AtmosModel::GenerateHahgTables(), Isis::AtmosModel::GenerateHahgTablesShadow(), and Isis::AtmosModel::SetAtmosInc().

◆ p_atmosNinc

int Isis::AtmosModel::p_atmosNinc

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), Isis::AtmosModel::AtmosNinc(), Isis::AtmosModel::GenerateAhTable(), and Isis::AtmosModel::GenerateHahgTables().

◆ p_atmosPhi

double Isis::AtmosModel::p_atmosPhi

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetAtmosPhi().

◆ p_atmosSini

double Isis::AtmosModel::p_atmosSini

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::AtmosModel::GenerateAhTable(), Isis::AtmosModel::GenerateHahgTables(), Isis::AtmosModel::GenerateHahgTablesShadow(), and Isis::AtmosModel::SetAtmosInc().

◆ p_atmosTau

double Isis::AtmosModel::p_atmosTau

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), Isis::AtmosModel::AtmosTau(), Isis::AtmosModel::SetAtmosTau(), and Isis::AtmosModel::SetStandardConditions().

◆ p_atmosTauref

double Isis::AtmosModel::p_atmosTauref

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), Isis::AtmosModel::AtmosTauref(), Isis::AtmosModel::SetAtmosTauref(), and Isis::AtmosModel::SetStandardConditions().

◆ p_atmosTausave

double Isis::AtmosModel::p_atmosTausave

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), and Isis::AtmosModel::SetStandardConditions().

◆ p_atmosWha

double Isis::AtmosModel::p_atmosWha

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), Isis::AtmosModel::AtmosWha(), and Isis::AtmosModel::SetAtmosWha().

◆ p_atmosWhasave

double Isis::AtmosModel::p_atmosWhasave

protectedinherited

Referenced by Isis::AtmosModel::AtmosModel().

◆ p_pstd

double Isis::AtmosModel::p_pstd

protectedinherited

Pure atmospheric-scattering term.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_sbar

double Isis::AtmosModel::p_sbar

protectedinherited

Illumination of the ground by the sky.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_trans

double Isis::AtmosModel::p_trans

protectedinherited

Transmission of surface reflected light through the atmosphere overall.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_trans0

double Isis::AtmosModel::p_trans0

protectedinherited

Transmission of surface reflected light through the atmosphere with no scatterings in the atmosphere.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

◆ p_transs

double Isis::AtmosModel::p_transs

protectedinherited

Transmission of light that must be subtracted from the flat surface model to get the shadow model.

Referenced by Isis::AtmosModel::AtmosModel(), Isis::Anisotropic1::AtmosModelAlgorithm(), Isis::Anisotropic2::AtmosModelAlgorithm(), Isis::HapkeAtm1::AtmosModelAlgorithm(), Isis::HapkeAtm2::AtmosModelAlgorithm(), Isis::Isotropic1::AtmosModelAlgorithm(), AtmosModelAlgorithm(), and Isis::AtmosModel::CalcAtmEffect().

The documentation for this class was generated from the following files:

/Users/astamile/ISIS3/isis/src/base/objs/Isotropic2/Isotropic2.h
/Users/astamile/ISIS3/isis/src/base/objs/Isotropic2/Isotropic2.cpp

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ Isotropic2()

◆ ~Isotropic2()

Member Function Documentation

◆ AlgorithmName()

◆ AtmosAb()

◆ AtmosAdditiveOffset()

◆ AtmosAhSpline()

◆ AtmosAhTable()

◆ AtmosBha()

◆ AtmosHahgsb()

◆ AtmosHahgt0Spline()

◆ AtmosHahgt0Table()

◆ AtmosHahgtSpline()

◆ AtmosHahgtTable()

◆ AtmosHga()

◆ AtmosHnorm()

◆ AtmosIncTable()

◆ AtmosModelAlgorithm()

◆ AtmosMunot()

◆ AtmosNinc()

◆ AtmosNulneg()

◆ AtmosTau()

◆ AtmosTauref()

◆ AtmosWha()

◆ CalcAtmEffect()

◆ Ei()

◆ En()

◆ Eulgam()

◆ G11Prime()

◆ GenerateAhTable()

◆ GenerateHahgTables()

◆ GenerateHahgTablesShadow()

◆ GetPhotoModel()

◆ SetAlgorithmName()

◆ SetAtmosAtmSwitch()

◆ SetAtmosBha()

◆ SetAtmosEstTau() [1/2]

◆ SetAtmosEstTau() [2/2]

◆ SetAtmosHga()

◆ SetAtmosHnorm()

◆ SetAtmosInc()

◆ SetAtmosIord() [1/2]

◆ SetAtmosIord() [2/2]

◆ SetAtmosNulneg() [1/2]

◆ SetAtmosNulneg() [2/2]

◆ SetAtmosPhi()

◆ SetAtmosTau()

◆ SetAtmosTauref()

◆ SetAtmosWha()

◆ SetOldTau()

◆ SetOldWha()

◆ SetStandardConditions()

◆ StandardConditions()

◆ TauOrWhaChanged()

Member Data Documentation

◆ p_atmosAb

◆ p_atmosAddOffset

◆ p_atmosAhSpline

◆ p_atmosAhTable

◆ p_atmosAtmSwitch

◆ p_atmosBha

◆ p_atmosBhasave

◆ p_atmosCosphi

◆ p_atmosEstTau

◆ p_atmosEulgam

◆ p_atmosHahgsb

◆ p_atmosHahgt0Spline

◆ p_atmosHahgt0Table

◆ p_atmosHahgtSpline

◆ p_atmosHahgtTable

◆ p_atmosHga

◆ p_atmosHgasave

◆ p_atmosHnorm

◆ p_atmosInc