Container class for BundleAdjustment settings. More...

#include <BundleSettings.h>

Collaboration diagram for Isis::BundleSettings:

Classes
struct	MaximumLikelihoodModelTableRecord
	This struct is needed to write the m_maximumLikelihood variable as an HDF5 table. More...

class	XmlHandler
	This class is needed to read/write BundleSettings from/to an XML formateed file. More...

Public Types
enum	ConvergenceCriteria { Sigma0 , ParameterCorrections }
	This enum defines the options for the bundle adjustment's convergence. More...

enum	MaximumLikelihoodModel { NoMaximumLikelihoodEstimator , Huber , ModifiedHuber , Welsch , Chen }
	This enum defines the options for maximum likelihood estimation. More...

Public Member Functions
	BundleSettings ()
	Constructs a BundleSettings object.

	BundleSettings (const BundleSettings &other)
	This copy constructor sets this BundleSettings' member data to match that of the 'other' given BundleSettings.

	BundleSettings (Project project, XmlStackedHandlerReader xmlReader)
	Construct a BundleSettings object from member data read from an XML file.

	~BundleSettings ()
	Destroys the BundleSettings object.

BundleSettings &	operator= (const BundleSettings &other)
	Assignment operator to allow proper copying of the 'other' BundleSettings object to this one.

void	setValidateNetwork (bool validate)
	Sets the internal flag to indicate whether to validate the network before the bundle adjustment.

bool	validateNetwork () const
	This method is used to determine whether to validate the network before the bundle adjustment.

void	setSolveOptions (bool solveObservationMode=false, bool updateCubeLabel=false, bool errorPropagation=false, bool solveRadius=false, SurfacePoint::CoordinateType coordTypeBundle=SurfacePoint::Latitudinal, SurfacePoint::CoordinateType coordTypeReports=SurfacePoint::Latitudinal, double globalPointCoord1AprioriSigma=Isis::Null, double globalPointCoord2AprioriSigma=Isis::Null, double globalPointCoord3AprioriSigma=Isis::Null)
	Set the solve options for the bundle adjustment.

void	setOutlierRejection (bool outlierRejection, double multiplier=1.0)
	Set the outlier rejection options for the bundle adjustment.

void	setObservationSolveOptions (QList< BundleObservationSolveSettings > obsSolveSettingsList)
	Add the list of solve options for each observation.

void	setCreateInverseMatrix (bool createMatrix)
	Turn the creation of the inverse correlation matrix file on or off.

SurfacePoint::CoordinateType	controlPointCoordTypeReports () const
	Indicates the control point coordinate type for reports.

SurfacePoint::CoordinateType	controlPointCoordTypeBundle () const
	Indicates the control point coordinate type for the actual bundle adjust.

bool	createInverseMatrix () const
	Indicates if the settings will allow the inverse correlation matrix to be created.

bool	solveObservationMode () const
	This method is used to determine whether this bundle adjustment will solve for observation mode.

bool	solveRadius () const
	This method is used to determine whether this bundle adjustment will solve for radius.

bool	updateCubeLabel () const
	This method is used to determine whether this bundle adjustment will update the cube labels.

bool	errorPropagation () const
	This method is used to determine whether this bundle adjustment will perform error propagation.

bool	outlierRejection () const
	This method is used to determine whether outlier rejection will be performed on this bundle adjustment.

double	outlierRejectionMultiplier () const
	Retrieves the outlier rejection multiplier for the bundle adjustment.

double	globalPointCoord1AprioriSigma () const
	Retrieves global a priori sigma for 1st coordinate of points for this bundle.

double	globalPointCoord2AprioriSigma () const
	Retrieves the global a priori sigma for 2nd coordinate of points for this bundle.

double	globalPointCoord3AprioriSigma () const
	Retrieves the global a priori sigma 3rd coordinate of points for this bundle.

int	numberSolveSettings () const
	Retrieves the number of observation solve settings.

BundleObservationSolveSettings	observationSolveSettings (QString instrumentId) const
	Retrieves solve settings for the observation corresponding to the given observation number.

BundleObservationSolveSettings	observationSolveSettings (int n) const
	Retrieves solve settings for the observation corresponding to the given index.

QList< BundleObservationSolveSettings >	observationSolveSettings () const
	Retrieves solve settings for the observation corresponding to the given index.

void	setConvergenceCriteria (ConvergenceCriteria criteria, double threshold, int maximumIterations)
	Set the convergence criteria options for the bundle adjustment.

ConvergenceCriteria	convergenceCriteria () const
	Retrieves the convergence criteria to be used to solve the bundle adjustment.

double	convergenceCriteriaThreshold () const
	Retrieves the convergence threshold to be used to solve the bundle adjustment.

int	convergenceCriteriaMaximumIterations () const
	Retrieves the maximum number of iterations allowed to solve the bundle adjustment.

void	addMaximumLikelihoodEstimatorModel (MaximumLikelihoodWFunctions::Model model, double cQuantile)
	Add a maximum likelihood estimator (MLE) model to the bundle adjustment.

QList< QPair< MaximumLikelihoodWFunctions::Model, double > >	maximumLikelihoodEstimatorModels () const
	Retrieves the list of maximum likelihood estimator (MLE) models with their corresponding C-Quantiles.

void	setBundleTargetBody (BundleTargetBodyQsp bundleTargetBody)
	Sets the target body for the bundle adjustment.

BundleTargetBodyQsp	bundleTargetBody () const
	Retrieves a pointer to target body information for the bundle adjustment.

int	numberTargetBodyParameters () const
	This method is used to determine whether the bundle adjustment will solve for target body pole position.

bool	solveTargetBody () const
	This method is used to determine whether the bundle adjustment will solve for target body.

bool	solvePoleRA () const
	This method is used to determine whether the bundle adjustment will solve for target body pole right ascension.

bool	solvePoleRAVelocity () const
	This method is used to determine whether the bundle adjustment will solve for target body pole right ascension velocity.

bool	solvePoleDec () const
	This method is used to determine whether the bundle adjustment will solve for target body pole declination.

bool	solvePoleDecVelocity () const
	This method is used to determine whether the bundle adjustment will solve for target body pole declination velocity.

bool	solvePM () const
	This method is used to determine whether the bundle adjustment will solve for target body prime meridian.

bool	solvePMVelocity () const
	This method is used to determine whether the bundle adjustment will solve for target body prime meridian velocity.

bool	solvePMAcceleration () const
	This method is used to determine whether the bundle adjustment will solve for target body prime meridian acceleration.

bool	solveTriaxialRadii () const
	This method is used to determine whether the bundle adjustment will solve for target body triaxial radii.

bool	solveMeanRadius () const
	This method is used to determine whether the bundle adjustment will solve for target body mean radius.

void	setOutputFilePrefix (QString outputFilePrefix)
	Set the output file prefix for the bundle adjustment.

void	setSCPVLFilename (QString SCParamFilename)

QString	outputFilePrefix () const
	Retrieve the output file prefix.

void	setCubeList (QString fileName)
	BundleSettings::setCubeList.

QString	cubeList () const
	BundleSettings::cubeList.

QString	SCPVLFilename () const

void	save (QXmlStreamWriter &stream, const Project *project) const
	This method is used to write a BundleSettings object in an XML format.

Static Public Member Functions
static ConvergenceCriteria	stringToConvergenceCriteria (QString criteria)
	Converts the given string value to a BundleSettings::ConvergenceCriteria enumeration.

static QString	convergenceCriteriaToString (ConvergenceCriteria criteria)
	Converts the given BundleSettings::ConvergenceCriteria enumeration to a string.

Private Member Functions
void	init ()
	Set Default vales for a BundleSettings object.

Private Attributes
bool	m_validateNetwork
	Indicates whether the network should be validated.

QString	m_cubeList

bool	m_solveObservationMode
	Indicates whether to solve for observation mode.

bool	m_solveRadius
	Indicates whether to solve for point radii.

bool	m_updateCubeLabel
	Indicates whether to update cubes.

bool	m_errorPropagation
	Indicates whether to perform error propagation.

bool	m_createInverseMatrix
	Indicates whether to create the inverse matrix file.

bool	m_outlierRejection
	Indicates whether to perform automatic outlier detection/rejection.

double	m_outlierRejectionMultiplier
	The multiplier value for outlier rejection.

double	m_globalPointCoord1AprioriSigma
	The global a priori sigma for latitude or X.

double	m_globalPointCoord2AprioriSigma
	The global a priori sigma for longitude or Y.

double	m_globalPointCoord3AprioriSigma
	The global a priori sigma for radius or Z.

QList< BundleObservationSolveSettings >	m_observationSolveSettings

ConvergenceCriteria	m_convergenceCriteria
	Enumeration used to indicate what criteria to use to determine bundle adjustment convergence.

double	m_convergenceCriteriaThreshold
	Tolerance value corresponding to the selected convergence criteria.

int	m_convergenceCriteriaMaximumIterations
	Maximum number of iterations before quitting the bundle adjustment if it has not yet converged to the given threshold.

QList< QPair< MaximumLikelihoodWFunctions::Model, double > >	m_maximumLikelihood
	Model and C-Quantile for each of the three maximum likelihood estimations.

bool	m_solveTargetBody
	Indicates whether to solve for target body.

BundleTargetBodyQsp	m_bundleTargetBody
	A pointer to the target body settings and information.

SurfacePoint::CoordinateType	m_cpCoordTypeReports
	Indicates the coordinate type for outputting control points in reports.

SurfacePoint::CoordinateType	m_cpCoordTypeBundle
	Indicates the coordinate type used for control points in the bundle adjustment.

QString	m_outputFilePrefix
	The prefix for all output files.

Detailed Description

Container class for BundleAdjustment settings.

This class contains all of the settings needed to run a bundle adjustment. A BundleSettings object is passed into the BundleAdjustment constructor.

Author: 2014-05-14 Jeannie Backer

History

2014-05-14 Jeannie Backer - Original version.

2014-07-16 Jeannie Backer - Removed redundant mutators. Moved implementation for numberSolveSettings() and observationSolveSettings() to cpp file. Removed static methods to convert MaximumLikelihoodWFunctions::Model enum to QString since these methods now exist in MaximumLikelihoodWFunctions class. Changed pvlGroup() method to pvlObject(). Added unitTest.

2014-07-23 Jeannie Backer - Added QDataStream >> and << operators and read/write methods. Created unitTest.

2014-07-25 Jeannie Backer - Improved unitTest coverage to 100% scope/line/function.

2014-11-17 Jeannie Backer - Added xml read/write capabilities. XmlHandler constructor/destructor is not shown as covered by unitTest. Current test code coverage is (scope 98.79%, line 98.698%, function 96.0%).

2015-09-03 Jeannie Backer - Changed a priori sigma defaults from -1.0 to Isis::Null.

2015-09-03 Jeannie Backer - Added preliminary hdf5 read/write capabilities.

2015-10-14 Jeffrey Covington - Declared BundleSettingsQsp as a Qt metatype for use with QVariant.

2016-06-30 Jeannie Backer - Changed method name from "getBundleTargetBody" to "bundleTargetBody" to comply with ISIS coding standards. Added documentation. Updated test. References #3976. Fixes #.

2016-08-15 Jesse Mapel - Added methods to check if solving for triaxial radii, mean radius, or Prime Meridian Acceleration. Fixes #4159.

2016-08-18 Jesse Mapel - Changed to no longer inherit from QObject. Fixes #4192.

2016-08-18 Jeannie Backer - Removed the SolveMethod enum and all references to it. This option was deprecated because the Sparse option is faster than the other options (OldSparse and SpecialK) and gets identical results. Fixes #4162.

2016-08-23 Jesse Mapel - Modified to no longer determine which output files BundleAdjust and BundleSolutionInfo create. Fixes #4279.

2016-09-02 Jesse Mapel - Added m_SCPVLFilename member for storing multi-sensor settings from jigsaw. Fixes #4316.

2016-10-05 Ian Humphrey - Added m_createInverseMatrix, createInverseMatrix(), and setCreateInverseMatrix() so that bundle settings stores whether or not the inverse correlation matrix file (inverseMatrix.dat) will be generated during error propagation in the adjustment. Fixes #4315.

2016-10-13 Ian Humphrey - Updated documentation and variable names for observationSolveSettings(), as BundleObservationSolveSettings are acquired by an associated observation number. References #4293.

2016-10-17 Jesse Mapel - Removed m_SCPVLFilename parameter in accordance with USEPVL being removed from jigsaw. References #4316.

2017-04-24 Ian Humphrey - Removed pvlObject(). Fixes #4797.

2018-03-20 Ken Edmundson 1) Temporarily set default for m_createInverseMatrix to false. This is for creating and displaying the correlation matrix, which is currently not working. 2) commented out hdf5 header includes in cpp

2018-06-28 Christopher Combs - Added observationSolveSettings() method to retrieve m_observationSolveSettings. Fixes #497.

History

2017-06-25 Debbie Cook - Added m_cpCoordTypeReports and m_cpCoordTypeBundle. The 2nd type determines how control point coordinates are entered into the the matrix and interpreted throughout the adjustment. The 1st type determines the coordinate type of control points in reports. Added the new coordinate type as an argument to SetSolveOptions. Changed GlobalAprioriSigmas names to more generic names: Latitude to PointCoord1, Longitude to PointCoord2, and Radius to PointCoord3 so they can be used for either lat/lon/radius or x/y/z. Also added accessor methods, CoordTypeReports() & CoordTypeBundle() for the new coordinate type members. References #4649 and #501.

2019-05-17 Tyler Wilson - Added QString m_cubeList member function as well as get/set member functions. References #3267.

Todo

Determine which XmlStackedHandlerReader constructor is preferred

Determine which XmlStackedHandler needs a Project pointer (see constructors)

Determine whether QList<BundleObservationSolveSettings> m_observationSolveSettings should be a list of pointers, or a pointer to a list, or a pointer to a list of pointers, etc...

Determine whether QList< QPair< MaximumLikelihoodWFunctions::Model, double > > m_maximumLikelihood should be a list of pointers, or a pointer to a list, or a pointer to a list of pointers, etc...

TargetBody information is not being serialized. A determination needs to be made as to where it will be stored.

Definition at line 125 of file BundleSettings.h.

Member Enumeration Documentation

◆ ConvergenceCriteria

enum Isis::BundleSettings::ConvergenceCriteria

This enum defines the options for the bundle adjustment's convergence.

Enumerator
Sigma0	The value of sigma0 will be used to determine that the bundle adjustment has converged.
ParameterCorrections	All parameter corrections will be used to determine that the bundle adjustment has converged.

Definition at line 197 of file BundleSettings.h.

◆ MaximumLikelihoodModel

enum Isis::BundleSettings::MaximumLikelihoodModel

This enum defines the options for maximum likelihood estimation.

Enumerator
NoMaximumLikelihoodEstimator	Do not use a maximum likelihood model.
Huber	Use a Huber maximum likelihood model. This model approximates the L2 norm near zero and the L1 norm thereafter. This model has one continuous derivative.
ModifiedHuber	Use a modified Huber maximum likelihood model. This model approximates the L2 norm near zero and the L1 norm thereafter. This model has two continuous derivative.
Welsch	Use a Welsch maximum likelihood model. This model approximates the L2 norm near zero, but then decays exponentially to zero.
Chen	Use a Chen maximum likelihood model. This is a highly aggressive model that intentionally removes the largest few percent of residuals.????

Definition at line 230 of file BundleSettings.h.

Constructor & Destructor Documentation

◆ BundleSettings() [1/3]

Isis::BundleSettings::BundleSettings ( )

Constructs a BundleSettings object.

Default values are set for all member variables. By default, BundleSettings allows creation of the inverse correlation matrix file.

See also: createInverseMatrix(); setCreateInverseMatrix()

Definition at line 39 of file BundleSettings.cpp.

References init().

◆ BundleSettings() [2/3]

Isis::BundleSettings::BundleSettings ( const BundleSettings & other )

This copy constructor sets this BundleSettings' member data to match that of the 'other' given BundleSettings.

Parameters

other The BundleSettings object to be copied.

Definition at line 124 of file BundleSettings.cpp.

◆ BundleSettings() [3/3]

Isis::BundleSettings::BundleSettings	(	Project *	project,
		XmlStackedHandlerReader *	xmlReader )

Construct a BundleSettings object from member data read from an XML file.

FileName xmlFile("bundleSettingsFileName.xml");
 
QString xmlPath = xmlFile.expanded();
QFile file(xmlPath);
file.open(QFile::ReadOnly);
XmlStackedHandlerReader reader;
BundleSettings settings(project, reader);

Parameters

project	A pointer to the project where the Settings will be saved.
xmlReader	The Content handler to parse the BundleSettings XML

Definition at line 110 of file BundleSettings.cpp.

References init().

◆ ~BundleSettings()

Isis::BundleSettings::~BundleSettings ( )

Destroys the BundleSettings object.

Definition at line 153 of file BundleSettings.cpp.

Member Function Documentation

◆ addMaximumLikelihoodEstimatorModel()

void Isis::BundleSettings::addMaximumLikelihoodEstimatorModel	(	MaximumLikelihoodWFunctions::Model	model,
		double	maxModelCQuantile )

Add a maximum likelihood estimator (MLE) model to the bundle adjustment.

Parameters

model	The enumeration for the model to be used.
maxModelCQuantile	The C-Quantile of the residual to be used to compute the tweaking constant.

Exceptions

Isis::Exception::Programmer "For bundle adjustments with multiple maximum likelihood estimators, the first model must be of type HUBER or HUBER_MODIFIED."

Definition at line 727 of file BundleSettings.cpp.

References Isis::MaximumLikelihoodWFunctions::HuberModified, m_maximumLikelihood, and Isis::IException::Programmer.

◆ bundleTargetBody()

BundleTargetBodyQsp Isis::BundleSettings::bundleTargetBody ( ) const

Retrieves a pointer to target body information for the bundle adjustment.

Returns: BundleTargetBodyQsp A pointer to the BundleTargetBody object for the bundle adjustment to be run.

Definition at line 779 of file BundleSettings.cpp.

References m_bundleTargetBody.

Referenced by setBundleTargetBody().

◆ controlPointCoordTypeBundle()

SurfacePoint::CoordinateType Isis::BundleSettings::controlPointCoordTypeBundle ( ) const

Indicates the control point coordinate type for the actual bundle adjust.

This method returns the control point coordinate setting for performing the bundle adjust.

Returns: SurfacePoint::CoordinateType Returns the control point coordinate type setting

See also: BundleAdjust::errorPropagation()

Definition at line 375 of file BundleSettings.cpp.

References m_cpCoordTypeBundle.

Referenced by save().

◆ controlPointCoordTypeReports()

SurfacePoint::CoordinateType Isis::BundleSettings::controlPointCoordTypeReports ( ) const

Indicates the control point coordinate type for reports.

This method returns the control point coordinate setting for reporting control points.

Returns: SurfacePoint::CoordinateType Returns the control point coordinate type setting

Definition at line 361 of file BundleSettings.cpp.

References m_cpCoordTypeReports.

Referenced by save().

◆ convergenceCriteria()

BundleSettings::ConvergenceCriteria Isis::BundleSettings::convergenceCriteria ( ) const

Retrieves the convergence criteria to be used to solve the bundle adjustment.

Returns: ConvergenceCriteria The enumeration of the convergence criteria.

Definition at line 660 of file BundleSettings.cpp.

References m_convergenceCriteria.

Referenced by save().

◆ convergenceCriteriaMaximumIterations()

int Isis::BundleSettings::convergenceCriteriaMaximumIterations ( ) const

Retrieves the maximum number of iterations allowed to solve the bundle adjustment.

Parameters

maximumIterations The maximum number of iterations allowed before the bundle adjustment determines that the data is not converging.

Definition at line 684 of file BundleSettings.cpp.

References m_convergenceCriteriaMaximumIterations.

Referenced by save().

◆ convergenceCriteriaThreshold()

double Isis::BundleSettings::convergenceCriteriaThreshold ( ) const

Retrieves the convergence threshold to be used to solve the bundle adjustment.

Returns: double The threshold that determines convergence.

Definition at line 671 of file BundleSettings.cpp.

References m_convergenceCriteriaThreshold.

Referenced by save().

◆ convergenceCriteriaToString()

QString Isis::BundleSettings::convergenceCriteriaToString ( BundleSettings::ConvergenceCriteria criteria )

static

Converts the given BundleSettings::ConvergenceCriteria enumeration to a string.

This method is used to print the type of convergence criteria used in the bundle adjustment.

Parameters

criteria The ConvergenceCriteria enumeration to be converted.

Returns: QString The name associated with the given convergence criteria.

Exceptions

Isis::Exception::Programmer "Unknown bundle convergence criteria enum."

Definition at line 625 of file BundleSettings.cpp.

References ParameterCorrections, Isis::IException::Programmer, Sigma0, and Isis::toString().

Referenced by save().

◆ createInverseMatrix()

bool Isis::BundleSettings::createInverseMatrix ( ) const

Indicates if the settings will allow the inverse correlation matrix to be created.

This method is used to determine if the inverse correlation matrix file will be created when creating error propagation information in the bundle adjust. If error propagation is not turned on, then the inverse correlation matrix file will not be created.

Returns: bool Returns whether or now the inverse correlation matrix is allowed to be created.

See also: BundleAdjust::errorPropagation()

Definition at line 391 of file BundleSettings.cpp.

References m_createInverseMatrix, and m_errorPropagation.

Referenced by save().

◆ cubeList()

QString Isis::BundleSettings::cubeList ( ) const

BundleSettings::cubeList.

Returns: QString The name/path of the cube list.

Definition at line 244 of file BundleSettings.cpp.

Referenced by setCubeList().

◆ errorPropagation()

bool Isis::BundleSettings::errorPropagation ( ) const

This method is used to determine whether this bundle adjustment will perform error propagation.

Returns: bool Indicates whether to perform error propagation.

Definition at line 448 of file BundleSettings.cpp.

References m_errorPropagation.

Referenced by save(), and setSolveOptions().

◆ globalPointCoord1AprioriSigma()

double Isis::BundleSettings::globalPointCoord1AprioriSigma ( ) const

Retrieves global a priori sigma for 1st coordinate of points for this bundle.

Returns: double The global a priori sigma for point coordinate 1.

Definition at line 486 of file BundleSettings.cpp.

References m_globalPointCoord1AprioriSigma.

Referenced by save(), and setSolveOptions().

◆ globalPointCoord2AprioriSigma()

double Isis::BundleSettings::globalPointCoord2AprioriSigma ( ) const

Retrieves the global a priori sigma for 2nd coordinate of points for this bundle.

Returns: double The global a priori sigma for point coordinate 2.

Definition at line 496 of file BundleSettings.cpp.

References m_globalPointCoord2AprioriSigma.

Referenced by save(), and setSolveOptions().

◆ globalPointCoord3AprioriSigma()

double Isis::BundleSettings::globalPointCoord3AprioriSigma ( ) const

Retrieves the global a priori sigma 3rd coordinate of points for this bundle.

Returns: double The global a priori sigma for point coordinate 3.

Definition at line 506 of file BundleSettings.cpp.

References m_globalPointCoord3AprioriSigma.

Referenced by save(), and setSolveOptions().

◆ init()

void Isis::BundleSettings::init ( )

private

Set Default vales for a BundleSettings object.

Note we call the default constructor to initialize the TargetBody information that is not currently in the XML.

Definition at line 50 of file BundleSettings.cpp.

References Isis::SurfacePoint::Latitudinal, m_convergenceCriteria, m_convergenceCriteriaMaximumIterations, m_convergenceCriteriaThreshold, m_cpCoordTypeBundle, m_cpCoordTypeReports, m_createInverseMatrix, m_errorPropagation, m_globalPointCoord1AprioriSigma, m_globalPointCoord2AprioriSigma, m_globalPointCoord3AprioriSigma, m_maximumLikelihood, m_outlierRejection, m_outlierRejectionMultiplier, m_outputFilePrefix, m_solveObservationMode, m_solveRadius, m_solveTargetBody, m_updateCubeLabel, m_validateNetwork, Isis::Null, and Sigma0.

Referenced by BundleSettings(), and BundleSettings().

◆ maximumLikelihoodEstimatorModels()

QList< QPair< MaximumLikelihoodWFunctions::Model, double > > Isis::BundleSettings::maximumLikelihoodEstimatorModels ( ) const

Retrieves the list of maximum likelihood estimator (MLE) models with their corresponding C-Quantiles.

Returns: QList< QPair< MaximumLikelihoodWFunctions::Model, double > > The list of tuples of the form (model, quantile) to be used for the bundle adjustment.

Definition at line 749 of file BundleSettings.cpp.

References m_maximumLikelihood.

◆ numberSolveSettings()

int Isis::BundleSettings::numberSolveSettings ( ) const

Retrieves the number of observation solve settings.

Returns: int The number of solve settings object for this run of the bundle adjustment.

Definition at line 517 of file BundleSettings.cpp.

Referenced by observationSolveSettings(), and observationSolveSettings().

◆ numberTargetBodyParameters()

int Isis::BundleSettings::numberTargetBodyParameters ( ) const

This method is used to determine whether the bundle adjustment will solve for target body pole position.

Returns: bool Indicates whether to solve for target pole position. Retrieves the number of target body parameters. If the BundleTargetBody associated with this bundle adjustment is NULL, this method returns 0.; int The number of target body parameters.

Definition at line 801 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ observationSolveSettings() [1/3]

QList< BundleObservationSolveSettings > Isis::BundleSettings::observationSolveSettings ( ) const

Retrieves solve settings for the observation corresponding to the given index.

Returns: QList<BundleObservationSolveSettings> The QList of BundleObservationSolveSettings objects

Definition at line 576 of file BundleSettings.cpp.

◆ observationSolveSettings() [2/3]

BundleObservationSolveSettings Isis::BundleSettings::observationSolveSettings ( int n ) const

Retrieves solve settings for the observation corresponding to the given index.

Parameters

n	The index of the BundleObservationSolveSettings object to be accessed.

Returns: BundleObservationSolveSettings The observation settings object corresponding to the given index.

Exceptions

IException::Unknown "Unable to find BundleObservationSolveSettings with given index"

Definition at line 559 of file BundleSettings.cpp.

References numberSolveSettings(), Isis::toString(), and Isis::IException::Unknown.

◆ observationSolveSettings() [3/3]

BundleObservationSolveSettings Isis::BundleSettings::observationSolveSettings ( QString observationNumber ) const

Retrieves solve settings for the observation corresponding to the given observation number.

If no corresponding settings object exists, return a new solve settings with no related observation numbers.

Parameters

observationNumber The observation number associated with the BundleObservationSolveSettings object to be accessed.

Returns: BundleObservationSolveSettings The observation settings object that contains the observation number passed.

Definition at line 534 of file BundleSettings.cpp.

References numberSolveSettings().

◆ operator=()

BundleSettings & Isis::BundleSettings::operator= ( const BundleSettings & other )

Assignment operator to allow proper copying of the 'other' BundleSettings object to this one.

Parameters

other The BundleSettings object to be copied.

Returns: BundleSettings& A reference to the copied BundleSettings object.

History: 2017-07-04 Debbie A. Cook - Added new coordType members and made global coordinate names generic.

Definition at line 169 of file BundleSettings.cpp.

References m_bundleTargetBody, m_convergenceCriteria, m_convergenceCriteriaMaximumIterations, m_convergenceCriteriaThreshold, m_cpCoordTypeBundle, m_cpCoordTypeReports, m_createInverseMatrix, m_errorPropagation, m_globalPointCoord1AprioriSigma, m_globalPointCoord2AprioriSigma, m_globalPointCoord3AprioriSigma, m_maximumLikelihood, m_outlierRejection, m_outlierRejectionMultiplier, m_outputFilePrefix, m_solveObservationMode, m_solveRadius, m_solveTargetBody, m_updateCubeLabel, and m_validateNetwork.

◆ outlierRejection()

bool Isis::BundleSettings::outlierRejection ( ) const

This method is used to determine whether outlier rejection will be performed on this bundle adjustment.

Returns: bool Indicates whether to perform automatic outlier rejection during the bundle adjustment.

Definition at line 403 of file BundleSettings.cpp.

References m_outlierRejection.

Referenced by save(), and setOutlierRejection().

◆ outlierRejectionMultiplier()

double Isis::BundleSettings::outlierRejectionMultiplier ( ) const

Retrieves the outlier rejection multiplier for the bundle adjustment.

Returns: double The outlier rejection multiplier.

Definition at line 476 of file BundleSettings.cpp.

References m_outlierRejectionMultiplier.

Referenced by save().

◆ outputFilePrefix()

QString Isis::BundleSettings::outputFilePrefix ( ) const

Retrieve the output file prefix.

This string will be appended to all of the output files created by the bundle adjustment.

Returns: QString A string containing a prefix and/or directory path to be appended to all output files.

Definition at line 1036 of file BundleSettings.cpp.

References m_outputFilePrefix.

Referenced by save(), and setOutputFilePrefix().

◆ save()

void Isis::BundleSettings::save	(	QXmlStreamWriter &	stream,
		const Project *	project ) const

This method is used to write a BundleSettings object in an XML format.

Parameters

stream	The stream to write serialized XML output
project	The project that contains the settings

History: 2017-05-30 Debbie A. Cook - Added controlPointCoordType to the xml stream and made global coordinate names generic.

Definition at line 1050 of file BundleSettings.cpp.

References controlPointCoordTypeBundle(), controlPointCoordTypeReports(), convergenceCriteria(), convergenceCriteriaMaximumIterations(), convergenceCriteriaThreshold(), convergenceCriteriaToString(), createInverseMatrix(), errorPropagation(), globalPointCoord1AprioriSigma(), globalPointCoord2AprioriSigma(), globalPointCoord3AprioriSigma(), Isis::IsSpecial(), m_maximumLikelihood, Isis::MaximumLikelihoodWFunctions::modelToString(), outlierRejection(), outlierRejectionMultiplier(), outputFilePrefix(), solveObservationMode(), solveRadius(), Isis::toString(), updateCubeLabel(), and validateNetwork().

◆ setBundleTargetBody()

void Isis::BundleSettings::setBundleTargetBody ( BundleTargetBodyQsp bundleTargetBody )

Sets the target body for the bundle adjustment.

Parameters

bundleTargetBody A pointer to the BundleTargetBody object for the bundle adjustment to be run.

Definition at line 768 of file BundleSettings.cpp.

References bundleTargetBody(), and m_bundleTargetBody.

◆ setConvergenceCriteria()

void Isis::BundleSettings::setConvergenceCriteria	(	BundleSettings::ConvergenceCriteria	criteria,
		double	threshold,
		int	maximumIterations )

Set the convergence criteria options for the bundle adjustment.

Parameters

criteria	An enumeration for the convergence criteria to be used for this bundle adjustment.
threshold	The convergence threshold for this bundle adjustment.
maximumIterations	The maximum number of iterations allowed before the bundle adjustment determines that the data is not converging.

Definition at line 645 of file BundleSettings.cpp.

References m_convergenceCriteria, m_convergenceCriteriaMaximumIterations, and m_convergenceCriteriaThreshold.

◆ setCreateInverseMatrix()

void Isis::BundleSettings::setCreateInverseMatrix ( bool createMatrixFile )

Turn the creation of the inverse correlation matrix file on or off.

Note that the inverse correlation matrix is created in BundleAdjust, and will only be created if error propagation is turned on. By default, BundleSettings allows the inverse matrix to be created. This requires stand-alone applications (e.g. jigsaw) to call this method to turn of the correlation matrix creation.

Parameters

createMatrixFile Boolean indicating whether or not to allow the inverse matrix file to be created.

See also: BundleAdjust::errorPropagation()

Definition at line 466 of file BundleSettings.cpp.

References m_createInverseMatrix.

◆ setCubeList()

void Isis::BundleSettings::setCubeList ( QString cubeList )

BundleSettings::setCubeList.

Parameters

cubeList

Definition at line 234 of file BundleSettings.cpp.

References cubeList().

◆ setObservationSolveOptions()

void Isis::BundleSettings::setObservationSolveOptions ( QList< BundleObservationSolveSettings > obsSolveSettingsList )

Add the list of solve options for each observation.

Parameters

observationSolveSettings A list of BundleObservationSolveSettings objects to indicate the settings for each observation of the bundle adjustment.

Definition at line 347 of file BundleSettings.cpp.

◆ setOutlierRejection()

void Isis::BundleSettings::setOutlierRejection	(	bool	outlierRejection,
		double	multiplier = 1.0 )

Set the outlier rejection options for the bundle adjustment.

Parameters

outlierRejection	Indicates whether to perform automatic outlier rejection during the bundle adjustment.
mutliplier	The outlier rejection multiplier.

Definition at line 329 of file BundleSettings.cpp.

References m_outlierRejection, m_outlierRejectionMultiplier, and outlierRejection().

◆ setOutputFilePrefix()

void Isis::BundleSettings::setOutputFilePrefix ( QString outputFilePrefix )

Set the output file prefix for the bundle adjustment.

Parameters

outputFilePrefix A string containing a prefix and/or directory path

Definition at line 1022 of file BundleSettings.cpp.

References m_outputFilePrefix, and outputFilePrefix().

◆ setSolveOptions()

void Isis::BundleSettings::setSolveOptions	(	bool	solveObservationMode = false,
		bool	updateCubeLabel = false,
		bool	errorPropagation = false,
		bool	solveRadius = false,
		SurfacePoint::CoordinateType	coordTypeBundle = SurfacePoint::Latitudinal,
		SurfacePoint::CoordinateType	coordTypeReports = SurfacePoint::Latitudinal,
		double	globalPointCoord1AprioriSigma = Isis::Null,
		double	globalPointCoord2AprioriSigma = Isis::Null,
		double	globalPointCoord3AprioriSigma = Isis::Null )

Set the solve options for the bundle adjustment.

Parameters

solveObservationMode	A boolean value indicating whether to solve for observation mode.
updateCubeLabel	A boolean value indicating whether to update the cube labels after the bundle adjustment is completed.
errorPropagation	A boolean value indicating whether to use the cholmod library's error propagation.
solveRadius	A boolean value indicating whether to solve for radius.
coordType	The type of coordinates used for control points
globalPointCoord1AprioriSigma	The global a priori sigma for latitude.
globalPointCoord2AprioriSigma	The global a priori sigma for longitude.
globalPointCoord3AprioriSigma	The global a priori sigma for radius.

Definition at line 269 of file BundleSettings.cpp.

References errorPropagation(), globalPointCoord1AprioriSigma(), globalPointCoord2AprioriSigma(), globalPointCoord3AprioriSigma(), Isis::SurfacePoint::Latitudinal, m_cpCoordTypeBundle, m_cpCoordTypeReports, m_errorPropagation, m_globalPointCoord1AprioriSigma, m_globalPointCoord2AprioriSigma, m_globalPointCoord3AprioriSigma, m_solveObservationMode, m_solveRadius, m_updateCubeLabel, Isis::Null, Isis::SurfacePoint::Rectangular, solveObservationMode(), solveRadius(), and updateCubeLabel().

◆ setValidateNetwork()

void Isis::BundleSettings::setValidateNetwork ( bool validate )

Sets the internal flag to indicate whether to validate the network before the bundle adjustment.

See also: BundleAdjust::validateNetwork()

Parameters

validate Indicates whether the network should be validated by BundleAdjust.

Definition at line 208 of file BundleSettings.cpp.

References m_validateNetwork, and Isis::validate().

◆ solveMeanRadius()

bool Isis::BundleSettings::solveMeanRadius ( ) const

This method is used to determine whether the bundle adjustment will solve for target body mean radius.

See also: BundleTargetBody::solveMeanRadius()

Returns: bool Indicates whether to solve for target mean radius.

Definition at line 961 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solveObservationMode()

bool Isis::BundleSettings::solveObservationMode ( ) const

This method is used to determine whether this bundle adjustment will solve for observation mode.

Returns: bool Indicates whether to solve for observation mode.

Definition at line 414 of file BundleSettings.cpp.

References m_solveObservationMode.

Referenced by save(), and setSolveOptions().

◆ solvePM()

bool Isis::BundleSettings::solvePM ( ) const

This method is used to determine whether the bundle adjustment will solve for target body prime meridian.

See also: BundleTargetBody::solvePM()

Returns: bool Indicates whether to solve for target PM.

Definition at line 897 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solvePMAcceleration()

bool Isis::BundleSettings::solvePMAcceleration ( ) const

This method is used to determine whether the bundle adjustment will solve for target body prime meridian acceleration.

See also: BundleTargetBody::solvePMAcceleration()

Returns: bool Indicates whether to solve for target PM acceleration.

Definition at line 929 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solvePMVelocity()

bool Isis::BundleSettings::solvePMVelocity ( ) const

This method is used to determine whether the bundle adjustment will solve for target body prime meridian velocity.

See also: BundleTargetBody::solvePMVelocity()

Returns: bool Indicates whether to solve for target PM velocity.

Definition at line 913 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solvePoleDec()

bool Isis::BundleSettings::solvePoleDec ( ) const

This method is used to determine whether the bundle adjustment will solve for target body pole declination.

See also: BundleTargetBody::solvePoleDeclination()

Returns: bool Indicates whether to solve for target pole declination.

Definition at line 865 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solvePoleDecVelocity()

bool Isis::BundleSettings::solvePoleDecVelocity ( ) const

This method is used to determine whether the bundle adjustment will solve for target body pole declination velocity.

See also: BundleTargetBody::solvePoleDeclinationVelocity()

Returns: bool Indicates whether to solve for target pole declination velocity.

Definition at line 881 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solvePoleRA()

bool Isis::BundleSettings::solvePoleRA ( ) const

This method is used to determine whether the bundle adjustment will solve for target body pole right ascension.

See also: BundleTargetBody::solvePoleRA()

Returns: bool Indicates whether to solve for target pole RA.

Definition at line 833 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solvePoleRAVelocity()

bool Isis::BundleSettings::solvePoleRAVelocity ( ) const

This method is used to determine whether the bundle adjustment will solve for target body pole right ascension velocity.

See also: BundleTargetBody::solvePoleRAVelocity()

Returns: bool Indicates whether to solve for target pole RA velocity.

Definition at line 849 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solveRadius()

bool Isis::BundleSettings::solveRadius ( ) const

This method is used to determine whether this bundle adjustment will solve for radius.

Returns: bool Indicates whether to solve for radius.

Definition at line 425 of file BundleSettings.cpp.

References m_solveRadius.

Referenced by save(), and setSolveOptions().

◆ solveTargetBody()

bool Isis::BundleSettings::solveTargetBody ( ) const

This method is used to determine whether the bundle adjustment will solve for target body.

Returns: bool Indicates whether to solve for target body.

Definition at line 815 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ solveTriaxialRadii()

bool Isis::BundleSettings::solveTriaxialRadii ( ) const

This method is used to determine whether the bundle adjustment will solve for target body triaxial radii.

See also: BundleTargetBody::solveTriaxialRadii()

Returns: bool Indicates whether to solve for target triaxial radii.

Definition at line 945 of file BundleSettings.cpp.

References m_bundleTargetBody.

◆ stringToConvergenceCriteria()

BundleSettings::ConvergenceCriteria Isis::BundleSettings::stringToConvergenceCriteria ( QString criteria )

static

Converts the given string value to a BundleSettings::ConvergenceCriteria enumeration.

Currently accepted inputs are listed below. This method is case insensitive.

Sigma0
ParameterCorrections

Parameters

criteria Convergence criteria name to be converted.

Returns: ConvergenceCriteria The enumeration corresponding to the given name.

Exceptions

Isis::Exception::Programmer "Unknown bundle convergence criteria."

Definition at line 601 of file BundleSettings.cpp.

References ParameterCorrections, Isis::IException::Programmer, and Sigma0.

Referenced by Isis::BundleSettings::XmlHandler::startElement().

◆ updateCubeLabel()

bool Isis::BundleSettings::updateCubeLabel ( ) const

This method is used to determine whether this bundle adjustment will update the cube labels.

Returns: bool Indicates whether to update the cube labels after the bundle adjustment is completed.

Definition at line 437 of file BundleSettings.cpp.

References m_updateCubeLabel.

Referenced by save(), and setSolveOptions().

◆ validateNetwork()

bool Isis::BundleSettings::validateNetwork ( ) const

This method is used to determine whether to validate the network before the bundle adjustment.

See also: BundleAdjust::validateNetwork()

Returns: bool Indicates whether the network should be validated by BundleAdjust.

Definition at line 223 of file BundleSettings.cpp.

References m_validateNetwork.

Referenced by save().

Member Data Documentation

◆ m_bundleTargetBody

BundleTargetBodyQsp Isis::BundleSettings::m_bundleTargetBody

private

A pointer to the target body settings and information.

Definition at line 390 of file BundleSettings.h.

Referenced by bundleTargetBody(), numberTargetBodyParameters(), operator=(), setBundleTargetBody(), solveMeanRadius(), solvePM(), solvePMAcceleration(), solvePMVelocity(), solvePoleDec(), solvePoleDecVelocity(), solvePoleRA(), solvePoleRAVelocity(), solveTargetBody(), and solveTriaxialRadii().

◆ m_convergenceCriteria

ConvergenceCriteria Isis::BundleSettings::m_convergenceCriteria

private

Enumeration used to indicate what criteria to use to determine bundle adjustment convergence.

Definition at line 367 of file BundleSettings.h.

Referenced by convergenceCriteria(), init(), operator=(), and setConvergenceCriteria().

◆ m_convergenceCriteriaMaximumIterations

int Isis::BundleSettings::m_convergenceCriteriaMaximumIterations

private

Maximum number of iterations before quitting the bundle adjustment if it has not yet converged to the given threshold.

Definition at line 372 of file BundleSettings.h.

Referenced by convergenceCriteriaMaximumIterations(), init(), operator=(), and setConvergenceCriteria().

◆ m_convergenceCriteriaThreshold

double Isis::BundleSettings::m_convergenceCriteriaThreshold

private

Tolerance value corresponding to the selected convergence criteria.

Definition at line 370 of file BundleSettings.h.

Referenced by convergenceCriteriaThreshold(), init(), operator=(), and setConvergenceCriteria().

◆ m_cpCoordTypeBundle

SurfacePoint::CoordinateType Isis::BundleSettings::m_cpCoordTypeBundle

private

Indicates the coordinate type used for control points in the bundle adjustment.

Definition at line 395 of file BundleSettings.h.

Referenced by controlPointCoordTypeBundle(), init(), operator=(), and setSolveOptions().

◆ m_cpCoordTypeReports

SurfacePoint::CoordinateType Isis::BundleSettings::m_cpCoordTypeReports

private

Indicates the coordinate type for outputting control points in reports.

Definition at line 393 of file BundleSettings.h.

Referenced by controlPointCoordTypeReports(), init(), operator=(), and setSolveOptions().

◆ m_createInverseMatrix

bool Isis::BundleSettings::m_createInverseMatrix

private

Indicates whether to create the inverse matrix file.

Definition at line 352 of file BundleSettings.h.

Referenced by createInverseMatrix(), init(), operator=(), and setCreateInverseMatrix().

◆ m_cubeList

QString Isis::BundleSettings::m_cubeList

private

Definition at line 347 of file BundleSettings.h.

◆ m_errorPropagation

bool Isis::BundleSettings::m_errorPropagation

private

Indicates whether to perform error propagation.

Definition at line 351 of file BundleSettings.h.

Referenced by createInverseMatrix(), errorPropagation(), init(), operator=(), and setSolveOptions().

◆ m_globalPointCoord1AprioriSigma

double Isis::BundleSettings::m_globalPointCoord1AprioriSigma

private

The global a priori sigma for latitude or X.

Definition at line 359 of file BundleSettings.h.

Referenced by globalPointCoord1AprioriSigma(), init(), operator=(), and setSolveOptions().

◆ m_globalPointCoord2AprioriSigma

double Isis::BundleSettings::m_globalPointCoord2AprioriSigma

private

The global a priori sigma for longitude or Y.

Definition at line 360 of file BundleSettings.h.

Referenced by globalPointCoord2AprioriSigma(), init(), operator=(), and setSolveOptions().

◆ m_globalPointCoord3AprioriSigma

double Isis::BundleSettings::m_globalPointCoord3AprioriSigma

private

The global a priori sigma for radius or Z.

Definition at line 361 of file BundleSettings.h.

Referenced by globalPointCoord3AprioriSigma(), init(), operator=(), and setSolveOptions().

◆ m_maximumLikelihood

QList< QPair< MaximumLikelihoodWFunctions::Model, double > > Isis::BundleSettings::m_maximumLikelihood

private

Model and C-Quantile for each of the three maximum likelihood estimations.

The C-Quantile is the quantile of the residual used to compute the tweaking constant. Note that this is an ordered list and that the Welsch and Chen models can not be used for the first model.

Definition at line 384 of file BundleSettings.h.

Referenced by addMaximumLikelihoodEstimatorModel(), init(), maximumLikelihoodEstimatorModels(), operator=(), and save().

◆ m_observationSolveSettings

QList<BundleObservationSolveSettings> Isis::BundleSettings::m_observationSolveSettings

private

Definition at line 364 of file BundleSettings.h.

◆ m_outlierRejection

bool Isis::BundleSettings::m_outlierRejection

private

Indicates whether to perform automatic outlier detection/rejection.

Definition at line 353 of file BundleSettings.h.

Referenced by init(), operator=(), outlierRejection(), and setOutlierRejection().

◆ m_outlierRejectionMultiplier

double Isis::BundleSettings::m_outlierRejectionMultiplier

private

The multiplier value for outlier rejection.

Defaults to 1, so no change if rejection = false.

Definition at line 355 of file BundleSettings.h.

Referenced by init(), operator=(), outlierRejectionMultiplier(), and setOutlierRejection().

◆ m_outputFilePrefix

QString Isis::BundleSettings::m_outputFilePrefix

private

The prefix for all output files.

If the user does not want output files to be written to the current directory, the output directory path should be included in this prefix.

Definition at line 398 of file BundleSettings.h.

Referenced by init(), operator=(), outputFilePrefix(), and setOutputFilePrefix().

◆ m_solveObservationMode

bool Isis::BundleSettings::m_solveObservationMode

private

Indicates whether to solve for observation mode.

Definition at line 348 of file BundleSettings.h.

Referenced by init(), operator=(), setSolveOptions(), and solveObservationMode().

◆ m_solveRadius

bool Isis::BundleSettings::m_solveRadius

private

Indicates whether to solve for point radii.

Definition at line 349 of file BundleSettings.h.

Referenced by init(), operator=(), setSolveOptions(), and solveRadius().

◆ m_solveTargetBody

bool Isis::BundleSettings::m_solveTargetBody

private

Indicates whether to solve for target body.

Definition at line 389 of file BundleSettings.h.

Referenced by init(), and operator=().

◆ m_updateCubeLabel

bool Isis::BundleSettings::m_updateCubeLabel

private

Indicates whether to update cubes.

Definition at line 350 of file BundleSettings.h.

Referenced by init(), operator=(), setSolveOptions(), and updateCubeLabel().

◆ m_validateNetwork

bool Isis::BundleSettings::m_validateNetwork

private

Indicates whether the network should be validated.

Definition at line 346 of file BundleSettings.h.

Referenced by init(), operator=(), setValidateNetwork(), and validateNetwork().

The documentation for this class was generated from the following files:

src/control/objs/BundleSettings/BundleSettings.h
src/control/objs/BundleSettings/BundleSettings.cpp

Classes

Public Types

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ ConvergenceCriteria

◆ MaximumLikelihoodModel

Constructor & Destructor Documentation

◆ BundleSettings() [1/3]

◆ BundleSettings() [2/3]

◆ BundleSettings() [3/3]

◆ ~BundleSettings()

Member Function Documentation

◆ addMaximumLikelihoodEstimatorModel()

◆ bundleTargetBody()

◆ controlPointCoordTypeBundle()

◆ controlPointCoordTypeReports()

◆ convergenceCriteria()

◆ convergenceCriteriaMaximumIterations()

◆ convergenceCriteriaThreshold()

◆ convergenceCriteriaToString()

◆ createInverseMatrix()

◆ cubeList()

◆ errorPropagation()

◆ globalPointCoord1AprioriSigma()

◆ globalPointCoord2AprioriSigma()

◆ globalPointCoord3AprioriSigma()

◆ init()

◆ maximumLikelihoodEstimatorModels()

◆ numberSolveSettings()

◆ numberTargetBodyParameters()

◆ observationSolveSettings() [1/3]

◆ observationSolveSettings() [2/3]

◆ observationSolveSettings() [3/3]

◆ operator=()

◆ outlierRejection()

◆ outlierRejectionMultiplier()

◆ outputFilePrefix()

◆ save()

◆ setBundleTargetBody()

◆ setConvergenceCriteria()

◆ setCreateInverseMatrix()

◆ setCubeList()

◆ setObservationSolveOptions()

◆ setOutlierRejection()

◆ setOutputFilePrefix()

◆ setSolveOptions()

◆ setValidateNetwork()

◆ solveMeanRadius()

◆ solveObservationMode()

◆ solvePM()

◆ solvePMAcceleration()

◆ solvePMVelocity()

◆ solvePoleDec()

◆ solvePoleDecVelocity()

◆ solvePoleRA()

◆ solvePoleRAVelocity()

◆ solveRadius()

◆ solveTargetBody()

◆ solveTriaxialRadii()

◆ stringToConvergenceCriteria()

◆ updateCubeLabel()

◆ validateNetwork()

Member Data Documentation

◆ m_bundleTargetBody

◆ m_convergenceCriteria

◆ m_convergenceCriteriaMaximumIterations

◆ m_convergenceCriteriaThreshold

◆ m_cpCoordTypeBundle

◆ m_cpCoordTypeReports

◆ m_createInverseMatrix

◆ m_cubeList

◆ m_errorPropagation

◆ m_globalPointCoord1AprioriSigma

◆ m_globalPointCoord2AprioriSigma

◆ m_globalPointCoord3AprioriSigma

◆ m_maximumLikelihood