ISIS Application Documentation
viknonoodle | Standard View | TOC | Home |
Remove periodic noise from a Viking image
Description
Categories
Groups
History
Name | Description |
---|---|
FROM | Input file to apply VIKNONOODLE to. |
TO | Output cube |
Name | Description |
---|---|
TOLERANCE | Frequency magnitude tolerance level. |
The input cube with periodic noise in the sample direction.
Type | cube |
---|---|
File Mode | input |
Filter | *.cub |
The resultant cube with the noise removed.
Type | cube |
---|---|
File Mode | output |
Pixel Type | real |
Filter | *.cub |
The tolerance parameter is used to specify how strong the frequency must be to count as noise. The higher the tolerance level, the less likely the frequency will be cleaned. However, if the tolerance is too low, it may wipe out good data and some banding may occur around the noise location. (Note: most noise frequencies have a magnitude greater than 1.0).
Type | double |
---|---|
Default | 0.5 |
Jacob Danton | 2006-05-22 | Original version |
Elizabeth Miller | 2006-07-24 | Moved from base to viking area |
Brendan George | 2006-09-28 | Documentation fixes |
Steven Lambright | 2007-12-14 | Fixed boundary condition where vectors went out of bounds |
Debbie A. Cook | 2011-12-12 | Added a check for a line with no valid pixels and just copy the input line to the output in that case |
U.S. Department of the Interior | U.S. Geological Survey ISIS | Privacy & Disclaimers | Astrogeology Research Program To contact us, please post comments and questions on the USGS Astrogeology Discussion Board To report a bug, or suggest a feature go to: ISIS Github File Modified: 02/21/2025 20:06:00 |